THE DESIGN AND ANALYSIS OF EXPERIMENTS. By Oscar Kempthorne. New York, John Wiley and Sons, Inc., 1952. 631 pp. $8.50. This book by a teacher of statistics (as well as a consultant for \"experimenters\") is a comprehensive study of the philosophical background for the statistical design of experiment. It is necessary to have some facility with algebraic notation and manipulation to be able to use the volume intelligently. The problems are presented from the theoretical point of view, without such practical examples as would be helpful for those not acquainted with mathematics. The mathematical justification for the techniques is given. As a somewhat advanced treatment of the design and analysis of experiments, this volume will be interesting and helpful for many who approach statistics theoretically as well as practically. With emphasis on the \"why,\" and with description given broadly, the author relates the subject matter to the general theory of statistics and to the general problem of experimental inference. MARGARET J. ROBERTSON

The Design and Analysis of Experiments

There has been much effort to provide eco-friendly and biodegradable materials for the next generation of composite products owing to global environmental concerns and increased awareness of renewable green resources. An increase in the use of natural materials in composites has led to a reduction in greenhouse gas emissions and carbon footprint of composites. In addition to the benefits obtained from green materials, there are some challenges in working with them, such as poor compatibility between the reinforcing natural fiber and matrix and the relatively high moisture absorption of natural fibers. Green composites can be a suitable alternative for petroleum-based materials. However, before this can be accomplished, there are a number of issues that need to be addressed, including poor interfacial adhesion between the matrix and natural fibers, moisture absorption, poor fire resistance, low impact strength, and low durability. Several researchers have studied the properties of natural fiber composites. These investigations have resulted in the development of several procedures for modifying natural fibers and resins. To address the increasing demand to use eco-friendly materials in different applications, an up-do-date review on natural fiber and resin types and sources, modification and processing techniques, physical and mechanical behaviors, applications, life-cycle assessment, and other properties of green composites is required to provide a better understanding of the behavior of green composites. This paper presents such a review based on 322 studies published since 1978.

A review of natural fiber composites: properties, modification and processing techniques, characterization, applications

This paper reports the synthesis and detailed characterization of graphite thin films produced by thermal decomposition of the (0001) face of a 6H-SiC wafer, demonstrating the successful growth of single crystalline films down to approximately one graphene layer. The growth and characterization were carried out in ultrahigh vacuum (UHV) conditions. The growth process and sample quality were monitored by low-energy electron diffraction, and the thickness of the sample was determined by core level x-ray photoelectron spectroscopy. High-resolution angle-resolved photoemission spectroscopy shows constant energy map patterns, which are very sharp and fully momentum-resolved, but nonetheless not resolution limited. We discuss the implications of this observation in connection with scanning electron microscopy data, as well as with previous studies.

Synthesis and characterization of atomically-thin graphite filmson a silicon carbide substrate,

Modeling strategies of 3D woven composites: A review

We have produced ultrathin epitaxial graphite films which show remarkable 2D electron gas (2DEG) behavior. The films, composed of typically 3 graphene sheets, were grown by thermal decomposition on the (0001) surface of 6H-SiC, and characterized by surface-science techniques. The low-temperature conductance spans a range of localization regimes according to the structural state (square resistance 1.5 kOhm to 225 kOhm at 4 K, with positive magnetoconductance). Low resistance samples show characteristics of weak-localization in two dimensions, from which we estimate elastic and inelastic mean free paths. At low field, the Hall resistance is linear up to 4.5 T, which is well-explained by n-type carriers of density 10^{12} cm^{-2} per graphene sheet. The most highly-ordered sample exhibits Shubnikov - de Haas oscillations which correspond to nonlinearities observed in the Hall resistance, indicating a potential new quantum Hall system. We show that the high-mobility films can be patterned via conventional lithographic techniques, and we demonstrate modulation of the film conductance using a top-gate electrode. These key elements suggest electronic device applications based on nano-patterned epitaxial graphene (NPEG), with the potential for large-scale integration.

Ultrathin epitaxial graphite: 2D electron gas properties and a route toward graphene-based nanoelectronics

The aim of this study is to review three-dimensional (3D) braided fabrics and, in particular, to provide a critical review of the development of 3D braided preform structures and techniques.3D braided preforms are classified based on various parameters depending on the yarn sets, yarn orientation and intertwining, micro-meso unit cells and macro geometry. Biaxial and triaxial two-dimensional (2D) braided fabrics have been widely used as simple- and complex-shaped structural composite parts in various technical areas. However, 2D braided fabric has size and thickness limitations. 3D braided fabrics have multiple layers and no delamination due to intertwine-type out-of-plane interlacement. However, the 3D braided fabrics have low transverse properties and they also have size and thickness limitations. On the other hand, various unit cell base models on 3D braiding were developed to analyze the properties of 3D braided structures. Most of the unit cell base models include micromechanics and numerical techniq...

Three-dimensional braiding for composites: A review:

The aim of this study is to review three-dimensional (3D) fabrics and a critical review is especially provided on the development of multiaxis 3D woven preform structures and techniques. 3D preforms are classified based on various parameters depending on the fiber sets, fiber orientation and interlacements, and micro–meso unit cells and macro geometry. Biaxial and triaxial two-dimensional (2D) fabrics have been widely used as structural composite parts in various technical areas. However, they suffer delamination between their layers due to the lack of fibers. 3D woven fabrics have multiple layers and no delamination due to the presence of Z-fibers. However, the 3D woven fabrics have low in-plane properties. Multiaxis 3D knitted fabrics have no delamination and their in-plane properties are enhanced due to the bias yarn layers. However, they have limitations regarding multiple layering and layer sequences. Multiaxis 3D woven fabrics have multiple layers and no delamination due to Z-fibers and in-plane properties enhanced due to the bias yarn layers. Also, the layer sequence can be arranged based on end-use requirements. However, the multiaxis 3D weaving technique is at an early stage of development and needs to be fully automated. This will be a future technological challenge in the area of multiaxis 3D weaving.

https://journals.sagepub.com/doi/pdf/10.1177/0040517511435013

Multiaxis three-dimensional weaving for composites: A review

In this study, the impact resistance of two-dimensional (2D) fabrics and three-dimensional (3D) preforms is explained. These fabrics and preforms include 2D and 3D woven and knitted flat and circular fabrics. Various types of soft/layered structures as well as rigid composite are outlined with some design examples for ballistic and stab threats. The recent developments in nanotubes/nanofibers and shear-thickening fluids (STF) for ballistic fabrics are reviewed. The ballistic properties of single- and multi-layered fabrics are discussed. Their impact mechanism is explained for both soft vest and rigid armor applications. Analytical modeling and computational techniques for the estimation of ballistic properties are outlined. It is concluded that the ballistic/stab properties of fiber-reinforced soft and rigid composites can be enhanced by using high-strength fibers and tough matrices as well as specialized nanomaterials. Ballistic/stab resistance properties were also improved by the development of special ...

Two-dimensional (2D) fabrics and three-dimensional (3D) preforms for ballistic and stabbing protection: A review:

The increasing global environmental concerns and awareness of renewable green resources is continuously expanding the demand for eco-friendly, sustainable and biodegradable natural fibre reinforced composites (NFRCs). Natural fibres already occupy an important place in the composite industry due to their excellent physicochemical and mechanical properties. Natural fibres are biodegradable, biocompatible, eco-friendly and created from renewable resources. Therefore, they are extensively used in place of expensive and non-renewable synthetic fibres, such as glass fibre, carbon fibre and aramid fibre, in many applications. Additionally, the NFRCs are used in automobile, aerospace, personal protective clothing, sports and medical industries as alternatives to the petroleum-based materials. To that end, in the last few decades numerous studies have been carried out on the natural fibre reinforced composites to address the problems associated with the reinforcement fibres, polymer matrix materials and composite fabrication techniques in particular. There are still some drawbacks to the natural fibre reinforced composites (NFRCs)—for example, poor interfacial adhesion between the fibre and the polymer matrix, and poor mechanical properties of the NFRCs due to the hydrophilic nature of the natural fibres. An up-to-date holistic review facilitates a clear understanding of the behaviour of the composites along with the constituent materials. This article intends to review the research carried out on the natural fibre reinforced composites over the last few decades. Furthermore, up-to-date encyclopaedic information about the properties of the NFRCs, major challenges and potential measures to overcome those challenges along with their prospective applications have been exclusively illustrated in this review work. Natural fibres are created from plant, animal and mineral-based sources. The plant-based cellulosic natural fibres are more economical than those of the animal-based fibres. Besides, these pose no health issues, unlike mineral-based fibres. Hence, in this review, the NFRCs fabricated with the plant-based cellulosic fibres are the main focus.

https://www.mdpi.com/2079-6412/10/10/973/pdf

Plant-Based Natural Fibre Reinforced Composites: A Review on Fabrication, Properties and Applications

The aim of this study was to understand the energy absorption mechanism and failure modes of newly developed multidirectionally-stitched structures. Para-aramid woven fabric was used. The structures were in unstitched and stitched forms. Nylon 6.6 yarn was used to stitch the structure in one, two and four directions whereas Kevlar® 129 yarn was used to make only the four-directionally-stitched structures. The yarn pull-out fixture was developed and the yarn pull-out test was performed on single woven fabric and stitched structures. Ballistic tests were performed on the structures using 9 mm full metal jacketed projectiles with a speed of 300 to 400 m/s. If the applied kinetic energy level is under the yarn breaking extension, crimp in the orthogonal yarns at the fabric structure is firstly removed, and thereafter yarn pull-out takes place in the structure plane, and later stage fabric deformation occurs in the out-of-plane direction of the structure. This phenomenon continues from the outside to the insid...

Multilayered and Multidirectionally-stitched aramid Woven Fabric Structures: Experimental Characterization of Ballistic Performance by Considering the Yarn Pull-out Test:

Kadir Bilisik

Papers

Three-dimensional braiding for composites: A review:

Multiaxis three-dimensional weaving for composites: A review

Two-dimensional (2D) fabrics and three-dimensional (3D) preforms for ballistic and stabbing protection: A review:

Plant-Based Natural Fibre Reinforced Composites: A Review on Fabrication, Properties and Applications

Multilayered and Multidirectionally-stitched aramid Woven Fabric Structures: Experimental Characterization of Ballistic Performance by Considering the Yarn Pull-out Test: