Kais Atallah

Bio: Kais Atallah is an academic researcher from University of Sheffield. The author has contributed to research in topics: Magnet & Rotor (electric). The author has an hindex of 40, co-authored 142 publications receiving 6655 citations.

A novel high-performance magnetic gear

Abstract: Mechanical gearboxes are used extensively to match the operating speed of prime-movers to the requirements of their loads. Although, high system torque densities can be achieved, gear lubrication and cooling are often required, whilst noise, vibration and reliability can be significant issues. The paper describes the design and performance of a magnetic gear, which employs rare-earth magnets, which simulation studies have shown to have a transmitted torque density exceeding 100 kNm/m/sup 3/.

Design, analysis and realisation of a high-performance magnetic gear

Abstract: Magnetic gears offer significant potential advantages compared with mechanical gears, such as reduced maintenance and improved reliability, inherent overload protection, and physical isolation between the input and output shafts. However, to date they have received relatively little attention, probably due to the relatively poor torque transmission capability of the magnetic circuit topologies which have been proposed. A new magnetic gear topology which combines a highly competitive torque transmission capability and a very high efficiency is described.

Trends in Wind Turbine Generator Systems

Abstract: This paper reviews the trends in wind turbine generator systems. After discussing some important requirements and basic relations, it describes the currently used systems: the constant speed system with squirrel-cage induction generator, and the three variable speed systems with doubly fed induction generator (DFIG), with gearbox and fully rated converter, and direct drive (DD). Then, possible future generator systems are reviewed. Hydraulic transmissions are significantly lighter than gearboxes and enable continuously variable transmission, but their efficiency is lower. A brushless DFIG is a medium speed generator without brushes and with improved low-voltage ride-through characteristics compared with the DFIG. Magnetic pseudo DDs are smaller and lighter than DD generators, but need a sufficiently low and stable magnet price to be successful. In addition, superconducting generators can be smaller and lighter than normal DD generators, but both cost and reliability need experimental demonstration. In power electronics, there is a trend toward reliable modular multilevel topologies.

Rotor loss in permanent-magnet brushless AC machines

Abstract: The eddy-current loss in the permanent magnets of brushless AC machines is usually neglected, since the fundamental air-gap field usually rotates in synchronism with the rotor, and time harmonics in the current waveform and space harmonics in the winding distribution are generally small. However, an important category of brushless AC machine design is emerging in which the fundamental component of the stator MMF has fewer poles than the rotor, the torque being developed by a higher order MMF harmonic. The fundamental and lower order MMF harmonics can then give rise to significant rotor eddy currents. An analytical model is developed to predict rotor-induced eddy currents in such machines, and to quantify the effectiveness of circumferentially segmenting the permanent magnets in reducing the rotor loss.

Rotor Eddy-Current Loss in Permanent-Magnet Brushless AC Machines

Abstract: This paper analyzes rotor eddy-current loss in permanent-magnet brushless ac machines. It is shown that analytical or finite-element techniques published in literature for predicting rotor eddy-current loss using space harmonic based approaches may not yield correct results in each magnet segment when one magnet-pole is circumferentially segmented into more than two pieces. It is also shown that the eddy-current loss in each equally segmented piece may differ by a large margin, which implies that the temperature distribution in the magnets will be uneven and the risk of demagnetization has to be carefully assessed. The theoretical derivation is validated by time-stepped transient finite-element analysis.

Multiphase Electric Machines for Variable-Speed Applications

Abstract: Although the concept of variable-speed drives, based on utilization of multiphase machines, dates back to the late 1960s, it was not until the mid- to late 1990s that multiphase drives became serious contenders for various applications. These include electric ship propulsion, locomotive traction, electric and hybrid electric vehicles, ldquomore-electricrdquo aircraft, and high-power industrial applications. As a consequence, there has been a substantial increase in the interest for such drive systems worldwide, resulting in a huge volume of work published during the last ten years. An attempt is made in this paper to provide a brief review of the current state of the art in the area. After addressing the reasons for potential use of multiphase rather than three-phase drives and the available approaches to multiphase machine designs, various control schemes are surveyed. This is followed by a discussion of the multiphase voltage source inverter control. Various possibilities for the use of additional degrees of freedom that exist in multiphase machines are further elaborated. Finally, multiphase machine applications in electric energy generation are addressed.

Multiphase induction motor drives - : a technology status review

Abstract: The area of multiphase variable-speed motor drives in general and multiphase induction motor drives in particular has experienced a substantial growth since the beginning of this century. Research has been conducted worldwide and numerous interesting developments have been reported in the literature. An attempt is made to provide a detailed overview of the current state-of-the-art in this area. The elaborated aspects include advantages of multiphase induction machines, modelling of multiphase induction machines, basic vector control and direct torque control schemes and PWM control of multiphase voltage source inverters. The authors also provide a detailed survey of the control strategies for five-phase and asymmetrical six-phase induction motor drives, as well as an overview of the approaches to the design of fault tolerant strategies for post-fault drive operation, and a discussion of multiphase multi-motor drives with single inverter supply. Experimental results, collected from various multiphase induction motor drive laboratory rigs, are also included to facilitate the understanding of the drive operation.

Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles

Abstract: With ever-increasing concerns on our environment, there is a fast growing interest in electric vehicles (EVs) and hybrid EVs (HEVs) from automakers, governments, and customers. As electric drives are the core of both EVs and HEVs, it is a pressing need for researchers to develop advanced electric-drive systems. In this paper, an overview of permanent-magnet (PM) brushless (BL) drives for EVs and HEVs is presented, with emphasis on machine topologies, drive operations, and control strategies. Then, three major research directions of the PM BL drive systems are elaborated, namely, the magnetic-geared outer-rotor PM BL drive system, the PM BL integrated starter-generator system, and the PM BL electric variable-transmission system.

Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges

Abstract: Fractional-slot concentrated-winding (FSCW) synchronous permanent magnet (PM) machines have been gaining interest over the last few years. This is mainly due to the several advantages that this type of windings provides. These include high-power density, high efficiency, short end turns, high slot fill factor particularly when coupled with segmented stator structures, low cogging torque, flux-weakening capability, and fault tolerance. This paper is going to provide a thorough analysis of FSCW synchronous PM machines in terms of opportunities and challenges. This paper will cover the theory and design of FSCW synchronous PM machines, achieving high-power density, flux-weakening capability, comparison of single- versus double-layer windings, fault-tolerance rotor losses, parasitic effects, comparison of interior versus surface PM machines, and various types of machines. This paper will also provide a summary of the commercial applications that involve FSCW synchronous PM machines.

Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles

Abstract: This paper reviews the relative merits of induction, switched reluctance, and permanent-magnet (PM) brushless machines and drives for application in electric, hybrid, and fuel cell vehicles, with particular emphasis on PM brushless machines. The basic operational characteristics and design requirements, viz. a high torque/power density, high efficiency over a wide operating range, and a high maximum speed capability, as well as the latest developments, are described. Permanent-magnet brushless dc and ac machines and drives are compared in terms of their constant torque and constant power capabilities, and various PM machine topologies and their performance are reviewed. Finally, methods for enhancing the PM excitation torque and reluctance torque components and, thereby, improving the torque and power capability, are described