Author
Kanzumba Kusakana
Other affiliations: Tshwane University of Technology, Central University, India
Bio: Kanzumba Kusakana is an academic researcher from Central University of Technology. The author has contributed to research in topics: Renewable energy & Hybrid system. The author has an hindex of 26, co-authored 154 publications receiving 2132 citations. Previous affiliations of Kanzumba Kusakana include Tshwane University of Technology & Central University, India.
Papers
More filters
••
TL;DR: In this paper, a review of various methods that can be used to minimize the negative impacts of the increased temperature while making an attempt to enhance the efficiency of photovoltaic solar panels operating beyond the recommended temperature of the Standard Test Conditions (STC).
Abstract: Cooling the operating surface is a key operational factor to take into consideration to achieve higher efficiency when operating solar photovoltaic systems. Proper cooling can improve the electrical efficiency, and decrease the rate of cell degradation with time, resulting in maximisation of the life span of photovoltaic modules. The excessive heat removed by the cooling system can be used in domestic, commercial or industrial applications. This paper presents a review of various methods that can be used to minimize the negative impacts of the increased temperature while making an attempt to enhance the efficiency of photovoltaic solar panels operating beyond the recommended temperature of the Standard Test Conditions (STC). Different cooling technologies are reviewed, namely Floating tracking concentrating cooling system (FTCC); Hybrid solar Photovoltaic/Thermal system cooled by water spraying; Hybrid solar Photovoltaic/ Thermoelectric PV/TE system cooled by heat sink; Hybrid solar Photovoltaic/Thermal (PV/T) cooled by forced water circulation; Improving the performance of solar panels through the use of phase-change materials; Solar panel with water immersion cooling technique; Solar PV panel cooled by transparent coating (photonic crystal cooling); Hybrid solar Photovoltaic/Thermal system cooled by forced air circulation, and Solar panel with Thermoelectric cooling. Several research papers are reviewed and classified based on their focus, contribution and the type of technology used to achieve the cooling of photovoltaic panels. The discussion of the results has been done based on the advantages, disadvantages, area of application as well as techno-economic character of each technology reviewed. The purpose of this review is to provide an understanding for each of the above-mentioned technologies to reduce the surface temperature of the PV module. The study will focus on the surface temperature reduction array bound by each of the cooling technologies. The performance of each cooling technology will also be highlighted. In addition to this study, this review will include a discussion comparing the performance of each cooling technology. The outcomes of this study are detailed in the conclusion section. This paper has revealed that any adequate technology selected to cool photovoltaic panels should be used to keep the operating surface temperature low and stable, be simple and reliable and, if possible, enable the use of extracted thermal heat to enhance the overall conversion efficiency. The presented detailed review can be used by engineers working on theory, design and/or application of photovoltaic systems.
288 citations
••
TL;DR: In this article, the current status of micro-hydrokinetic river (MHR) technology for rural applications is reviewed based on developments, applications, design, operation as well as different MHR technologies involved in rural electrification projects.
Abstract: Apparently, most hydrokinetic literatures mainly concentrate on large-scale technologies such as waves, tides and ocean current applications. This could be one of the reasons delaying the utilization of small-scale hydrokinetic river technology in rural areas. This paper therefore critically reviews the current status of micro-hydrokinetic river (MHR) technology for rural applications. Relevant research literatures based on developments, applications, design, operation as well as different MHR technologies involved in rural electrification projects have been reviewed. After conducting these reviews it has become clear that one of the key barriers hindering the employment of MHR technology in rural areas with access to flowing water is the lack of research demonstrating the technical, economic and environmental benefits of this technology compared to other rural electrification techniques. Studies that look towards the long-term perspective of techno-economic analysis inclusive of capital, maintenance and running costs computations need to be carried out promoting the interest in utilizing this technology. This paper will aid researchers to identify areas that need to improve as well as encourage public bodies to implement proper energy policies regarding the MHR technology usage in rural areas. It will also create awareness among site owners, investors, project developers and decision makers regarding the potential benefits of using this technology in rural areas especially in countries with little or no elevation.
186 citations
••
TL;DR: In this paper, the authors investigated the possibility of using hybrid photovoltaic-Wind renewable systems as primary sources of energy to supply mobile telephone base transceiver Stations in the rural regions of the Democratic Republic of Congo.
154 citations
••
TL;DR: In this paper, two control strategies involving continuous and on/off operation of the diesel generator in the solar photovoltaic (PV)-wind-diesel-battery hybrid systems are modelled.
Abstract: In this study, two control strategies involving ‘continuous’ and ‘ON/OFF’ operation of the diesel generator in the solar photovoltaic (PV)-wind-diesel-battery hybrid systems are modelled. The main purpose of these developed models is to minimise the hybrid system's operation cost while finding the optimal power flow considering the intermittent solar and wind resources, the battery state of charge and the fluctuating load demand . The non-linearity of the load demand, the non-linearity of the diesel generator fuel consumption curve as well as the battery operation limits have been considered in the development of the models. The simulations have been performed using ‘fmincon’ for the continuous operation and ‘intlinprog’ for the ON/OFF operation strategy implemented in Matlab. These models have been applied to two test examples; the simulation results are analysed and compared with the case where the diesel generator is used alone to supply the given load demand. The results show that using the developed PV-diesel-battery optimal operation control models, significant fuel saving can be achieved compared with the case where the diesel is used alone to supply the same load requirements.
124 citations
••
TL;DR: In this paper, an energy dispatch model that satisfies the load demand, taking into account the intermittent nature of the solar and wind energy sources and variations in demand, is presented for a hybrid system consisting of a photovoltaic unit, a wind unit, an pumped hydro storage system and a diesel generator.
119 citations
Cited by
More filters
01 Nov 2000
TL;DR: In this paper, the authors compared the power density characteristics of ultracapacitors and batteries with respect to the same charge/discharge efficiency, and showed that the battery can achieve energy densities of 10 Wh/kg or higher with a power density of 1.2 kW/kg.
Abstract: The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.
2,437 citations
••
TL;DR: The main objective of the paper is to provide the current status of these softwares to provide basic insight for a researcher to identify and utilize suitable tool for research and development studies of hybrid systems.
Abstract: Hybrid energy systems are being utilized for supplying electrical energy in urban, rural and remote areas to overcome the intermittence of solar and wind resources. A hybrid renewable energy system incorporates two or more electricity generation options based on renewable energy or fossil fuel unit. The techno-economic analysis of the hybrid system is essential for the efficient utilization of renewable energy resources. Due to multiple generation systems, hybrid system analysis, is quite complex and requires to be analyzed thoroughly. This requires software tools for the design, analysis, optimization, and economic viability of the systems. In this paper, 19 softwares with their main features and current status are presented. The softwares studied are HOMER, Hybrid2, RETScreen, iHOGA, INSEL, TRNSYS, iGRHYSO, HYBRIDS, RAPSIM, SOMES, SOLSTOR, HySim, HybSim, IPSYS, HySys, Dymola/Modelica, ARES, SOLSIM, and HYBRID DESIGNER. The research work related to hybrid systems carried out using these softwares at different locations worldwide is also reviewed. The main objective of the paper is to provide the current status of these softwares to provide basic insight for a researcher to identify and utilize suitable tool for research and development studies of hybrid systems. The capabilities of different softwares are also highlighted. The limitations, availability and areas of further research have also been identified.
729 citations
••
TL;DR: In this article, the authors provide a detailed analysis of such optimum sizing approaches in the literature that can make significant contributions to wider renewable energy penetration by enhancing the system applicability in terms of economy.
Abstract: Public awareness of the need to reduce global warming and the significant increase in the prices of conventional energy sources have encouraged many countries to provide new energy policies that promote the renewable energy applications. Such renewable energy sources like wind, solar, hydro based energies, etc. are environment friendly and have potential to be more widely used. Combining these renewable energy sources with back-up units to form a hybrid system can provide a more economic, environment friendly and reliable supply of electricity in all load demand conditions compared to single-use of such systems. One of the most important issues in this type of hybrid system is to optimally size the hybrid system components as sufficient enough to meet all load requirements with possible minimum investment and operating costs. There are many studies about the optimization and sizing of hybrid renewable energy systems since the recent popular utilization of renewable energy sources. In this concept, this paper provides a detailed analysis of such optimum sizing approaches in the literature that can make significant contributions to wider renewable energy penetration by enhancing the system applicability in terms of economy.
635 citations
••
TL;DR: In this paper, an extensive literature review is conducted on emerging power quality challenges due to renewable energy integration, which are caused by non-controllable variability of renewable energy resources.
Abstract: Renewable energy becomes a key contributor to our modern society, but their integration to power grid poses significant technical challenges. Power quality is an important aspect of renewable energy integration. The major power quality concerns are: 1) Voltage and frequency fluctuations, which are caused by noncontrollable variability of renewable energy resources. The intermittent nature of renewable energy resources due to ever-changing weather conditions leads to voltage and frequency fluctuations at the interconnected power grid. 2) Harmonics, which are introduced by power electronic devices utilized in renewable energy generation. When penetration level of renewable energy is high, the influence of harmonics could be significant. In this paper, an extensive literature review is conducted on emerging power quality challenges due to renewable energy integration. This paper consists of two sections: 1) Power quality problem definition. Wind turbines and solar photovoltaic systems and their power quality issues are summarized. 2) Existing approaches to improve power quality. Various methods are reviewed, and the control-technology-based power quality improvement is the major focus of this paper. The future research directions for emerging power quality challenges for renewable energy integration are recommended.
518 citations