Kaushal P. Patel

Bio: Kaushal P. Patel is an academic researcher from Charotar University of Science and Technology. The author has contributed to research in topics: Nanofiber & Electrospinning. The author has an hindex of 5, co-authored 12 publications receiving 85 citations.

Electrospun ZnO Nanoparticles Doped Core–Sheath Nanofibers: Characterization and Antimicrobial Properties

Abstract: Coaxial electrospinning technique was used to fabricate the core–sheath composite nanofibers of ZnO nanoparticle (Nps) (10%, 20% w/w) doped polymethyl methacrylate (PMMA) (as sheath) and polyvinyl alcohol (PVA) (as core). Fourier transform infrared (FT-IR) spectra were confirmed the weak forces arise between ZnO Nps, PMMA and PVA matrixes. The hexagonal (wurtzite) structure of ZnO Nps with ~ 30.8 nm of diameter was confirmed from the X-ray diffraction pattern. The morphology and microstructure of core–sheath composite nanofibers were confirmed from the scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It is clearly seen from the TEM images that the PMMA encapsulate the PVA core. Core–sheath composite nanofibers were assessed against Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis) bacteria through quantitative, disk diffusion and viable cell count methods. It was found that ZnO Nps doped core–sheath nanofibers were effectively inhibit the growth of gram positive bacteria, B. subtilis.

Electrospun nanofibers of poly(NPEMA-co.-CMPMA): Used as Heavy metal ion remover and water sanitizer

Abstract: Homo and copolymers of monomers 2-(N-phthalimido) ethylmethacrylate (NPEMA) and 4-Chloro-3-methyl phenyl methacrylate (CMPMA) were prepared in N,N-dimethyl formamide (DMF) solution at 70 °C using 2,2-azobisisobutyronitrile (AIBN) as initiator. The solution of poly(NPEMA-co.-CMPMA) in 20 % DMF was used to fabrication electrospun nanofiber by electrospinning technique. IR data were primarily employed to characterize polymers. The formation of nanofibers was identified by SEM study. The metal ion uptake capacity of copolymers and nanofibers were obtain by batch equilibrium method using different metal ion solution. The antimicrobial activity of the copolymers, Polymer nanocomposites and their nanofibers were tested against different microbial organisms by using quantitative method. The main objective of this investigation was to find whether nanofiber are better remover of metal ions compared to copolymers. It was also aimed to study the efficacy of nanofibers of copolymers and copolymer composite with nano Ag as water sanitizer.

Nano silver-embedded electrospun nanofiber of poly(4-chloro-3-methylphenyl methacrylate): use as water sanitizer

Abstract: Water contaminated with microorganisms causes numerous diseases and is a major concern for public health. In search of a simple material which can provide clean water free from pathogens, nanofibers of poly(4-chloro-3-methylphenyl methacrylate, abbreviated as CMPMA, and nano Ag-doped poly(CMPMA) composite nanofibers were used to decontaminate water from microorganisms such as Escherichia coli and Bacillus subtilis. Nanofibers were prepared by electrospinning. X-ray diffraction (XRD) and transmission electron microscopy (TEM) provide the diameters of the Ag nanoparticles which are in the range 18–21 and 13–18 nm. The diameter of the poly(CMPMA) and nano Ag-doped poly(CMPMA) composite nanofiber is seen to vary between 400 and 700 nm with the change of the processing parameters. Optimum parameters for uniform nanofibers have been obtained. The morphology of the fibers is derived from scanning electron microscopy (SEM). The superiority of the nano Ag-doped poly(CMPMA) composite nanofiber was established.

Methacrylate copolymers and their composites with nano-CdS: synthesis, characterization, thermal behavior, and antimicrobial properties

Abstract: Homo- and copolymers of 2-(N-phthalimido)ethyl methacrylate (NPEMA) and p-chlorophenyl methacrylate (PCPMA) were prepared in N,N-dimethyl formamide (DMF) solution at 70 °C using 2,2-azo-bisisobutyronitrile (AIBN) as initiator. The nano-CdS-doped polymer composite of NPEMA and PCPMA was prepared via in situ technique. The homo- and copolymers of NPEMA and PCPMA were characterized using FT-IR spectroscopy and gel permeation chromatography (GPC). The polymer nano composites were characterized using FT-IR spectroscopy, X-ray diffraction, and transmission electron microscopy. The reactivity ratios (r1 and r2) were obtained from the various linear graphical methods. The values of r1 (NPEMA) = 0.55 and r2 (PCPMA) = 1.30 were found from the same graphical methods. The copolymer microstructures were found from the mean sequence length, run number, and dyad fraction. Thermal behavior of polymers and polymer nano composites under nitrogen atmosphere was studied. The activation energies of neat polymers were varied in the range of 56–85 kJ/mol, while 28–56 kJ/mol energies were found for nano-CdS-doped polymer composites. The thermodynamic parameters of thermal degradation were also obtained. Kinetic and thermodynamic parameters were confirming the stability of the neat polymers than polymer nano composites. The polymers were assessed on different microorganisms for obtaining the antimicrobial properties. Overall, the polymers permit 10–52, 20–58, and 18–56% growth of bacteria, fungi, and yeast, respectively.

Coumarin–carbazole based functionalized pyrazolines: synthesis, characterization, anticancer investigation and molecular docking

Abstract: A series of novel pyrazoline scaffolds from coumarin–carbazole chalcones were synthesized. We explored various acetyl, amide, and phenyl substituents at the N-1 position of the pyrazoline core. The synthesized compounds were characterized by FTIR, 1H-NMR, 13C-NMR, DEPT, and mass spectroscopic techniques. The in vitro cytotoxicity study of all the synthesized compounds was evaluated against HeLa, NCI-H520 and NRK-52E cell lines. Compounds 4a and 7b became the most active compounds and exhibited their potential to arrest the cell cycle progression and induce apoptosis in both the cell lines. In addition, molecular docking studies revealed a higher binding affinity of both the molecules with CDK2 protein. Based on the obtained results, a comprehensive analysis is warranted to establish the role of compounds 4a and 7b as promising cancer therapeutic agents.

Current methodologies and approaches for the formation of core–sheath polymer fibers for biomedical applications

Abstract: The application of polymer fibers has rocketed to unimaginable heights in recent years and occupies every corner of our day-to-day life, from knitted protective textile clothes to buzzing smartphone electronics. Polymer fibers could be obtained from natural and synthetic polymers at a length scale from the nanometer to micrometer range. These fibers could be formed into different configurations such as single, core–sheath, hollow, blended, or composite according to human needs. Of these several conformations of fibers, core–sheath polymer fibers are an interesting class of materials, which shows superior physical, chemical, and biological properties. In core–sheath fiber structures, one of the components called a core is fully surrounded by the second component known as a sheath. In this format, different polymers can be applied as a sheath over a solid core of another polymer, thus resulting in a variety of modified properties while maintaining the major fiber property. After a brief introduction to core–sheath fibers, this review paper focuses on the development of the electrospinning process to manufacture core–sheath fibers followed by illustrating the current methodology and approaches to form them on a larger scale, suitable for industrial manufacturing and exploitation. Finally, the paper reviews the applications of the core–sheath fibers, in particular, recent studies of core–sheath polymer fibers in tissue engineering (nerve, vascular grafts, cardiomyocytes, bone, tendons, sutures, and wound healing), growth factors and other bioactive component release, and drug delivery. Therefore, core–sheath structures are a revolutionary development in the field of science and technology, becoming a backbone to many emerging technologies and novel opportunities.

Effects of Technical Textiles and Synthetic Nanofibers on Environmental Pollution.

Abstract: Textile manufacturing has been one of the highest polluting industrial sectors. It represents about one-fifth of worldwide industrial water pollution. It uses a huge number of chemicals, numerous of which are carcinogenic. The textile industry releases many harmful chemicals, such as heavy metals and formaldehyde, into water streams and soil, as well as toxic gases such as suspended particulate matter and sulphur dioxide to air. These hazardous wastes, may cause diseases and severe problems to human health such as respiratory and heart diseases. Pollution caused by the worldwide textile manufacturing units results in unimaginable harm, such as textile polymers, auxiliaries and dyes, to the environment. This review presents a systematic and comprehensive survey of all recently produced high-performance textiles; and will therefore assist a deeper understanding of technical textiles providing a bridge between manufacturer and end-user. Moreover, the achievements in advanced applications of textile material will be extensively studied. Many classes of technical textiles were proved in a variety of applications of different fields. The introductory material- and process-correlated identifications regarding raw materials and their transformation into yarns, fibers and fabrics followed by dyeing, printing, finishing of technical textiles and their further processing will be explored. Thus, the environmental impacts of technical textiles on soil, air and water are discussed.