Kazuhiko Endo

Bio: Kazuhiko Endo is an academic researcher from National Institute of Advanced Industrial Science and Technology. The author has contributed to research in topics: Thin film & Amorphous carbon. The author has an hindex of 35, co-authored 392 publications receiving 5014 citations. Previous affiliations of Kazuhiko Endo include Kanazawa Institute of Technology & Meiji University.

Method for vapor deposition of a metal compound film

Abstract: A method for forming a metal compound film includes alternate irradiation of an organometal compound and oxygen or nitrogen radicals to deposit monoatomic layers of the metal compound. The organometal compound includes zirconium, hafnium, lanthanide compounds. The resultant film includes little residual carbon and has excellent film characteristic with respect to leakage current.

Grain-Orientation Induced Work Function Variation in Nanoscale Metal-Gate Transistors—Part I: Modeling, Analysis, and Experimental Validation

Abstract: This paper highlights and experimentally verifies a new source of random threshold-voltage (V_th) fluctuation in emerging metal-gate transistors and proposes a statistical framework to investigate its device and circuit-level implications. The new source of variability, christened work-function (WF) variation (WFV), is caused by the dependence of metal WF on the orientation of its grains. The experimentally measured data reported in this paper confirm the existence of such variations in both planar and nonplanar high-k metal-gate transistors. As a result of WFV, the WFs of metal gates are statistical distributions instead of deterministic values. In this paper, the key parameters of such WF distributions are analytically modeled by identifying the physical dimensions of the devices and properties of materials used in the fabrication. It is shown that WFV can be modeled by a multinomial distribution where the key parameters of its probability distribution function can be calculated in terms of the aforementioned parameters. The analysis reveals that WFV will contribute a key source of V_th variability in emerging generations of metal-gate devices. Using the proposed framework, one can investigate the implications of WFV for process, device, and circuit design, which are discussed in Part II.

Fluorinated amorphous carbon thin films grown by plasma enhanced chemical vapor deposition for low dielectric constant interlayer dielectrics

Abstract: Fluorinated amorphous carbon films were proposed as low dielectric constant interlayer dielectrics for ultralarge scale integration circuits. The films were deposited by plasma enhanced chemical vapor deposition with CH4 and CF4 in a parallel plate rf (13.56 MHz) reactor. The dielectric constant of the amorphous carbon films deposited with CH4 was increased with increases in rf power. The addition of CF4 to CH4 raised the deposition rate and reduced the dielectric constant. At an rf power of 200 W, and at a flow rate of 47 sccm for CF4 and 3 sccm for CH4, the dielectric constant of the fluorinated amorphous carbon films was 2.1.

Demonstration, analysis, and device design considerations for independent DG MOSFETs

Abstract: This paper describes a comprehensive study on the threshold voltage (V/sub th/) controllability of four-terminal-driven double-gate (DG) MOSFETs (4T-XMOSFETs) with independently switched DGs. Two types of 4T-XMOSFETs (fin and vertical) are experimentally demonstrated and their V/sub th/ controllability is thoroughly investigated in relation to the initial V/sub th/ in the DG-mode based on comprehensible modeling of the devices. Based on the investigation and simulated predictions, device design guidelines for 4T-XMOSFETs are proposed. Decreasing the workfunction of the DGs and increasing the oxide thickness of the second gate (T/sub ox2/) are preferable for improving the performance of the 4T-XMOSFET. The optimum workfunction of DGs for attaining low I/sub off(stand-by)/ and high I/sub on(active)/ under the limited V/sub g2/ condition is also proposed.

Plasma deposition of low-dielectric-constant fluorinated amorphous carbon

Abstract: Fluorinated amorphous carbon thin films (a-C:F) for use as low-dielectric-constant interlayer dielectrics are deposited by helicon-wave plasma enhanced chemical vapor deposition. To improve their thermal stability, the feasibility of adjusting the fluorine-to-carbon (F/C) ratio by changing the deposition pressure was investigated. Decreasing the pressure increased the dissociation of a source fluorocarbon material in the plasma and decreased the F/C ratio of the deposited film. Both the thermal stability and the dielectric constant of the a-C:F films were increased as the F/C ratio was decreased. Thus, there is a tradeoff relationship between a low dielectric constant and high thermal stability and the tradeoff could be optimized by the pressure during deposition. The mechanism of the pressure dependency of the dielectric constant of a-C:F films was investigated by quantifying the contribution of each polarization and found that a decrease in the dielectric constant of a-C:F films can be attributed to dec...

Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process

Abstract: Atomic layer deposition(ALD), a chemical vapor deposition technique based on sequential self-terminating gas–solid reactions, has for about four decades been applied for manufacturing conformal inorganic material layers with thickness down to the nanometer range. Despite the numerous successful applications of material growth by ALD, many physicochemical processes that control ALD growth are not yet sufficiently understood. To increase understanding of ALD processes, overviews are needed not only of the existing ALD processes and their applications, but also of the knowledge of the surface chemistry of specific ALD processes. This work aims to start the overviews on specific ALD processes by reviewing the experimental information available on the surface chemistry of the trimethylaluminum/water process. This process is generally known as a rather ideal ALD process, and plenty of information is available on its surface chemistry. This in-depth summary of the surface chemistry of one representative ALD process aims also to provide a view on the current status of understanding the surface chemistry of ALD, in general. The review starts by describing the basic characteristics of ALD, discussing the history of ALD—including the question who made the first ALD experiments—and giving an overview of the two-reactant ALD processes investigated to date. Second, the basic concepts related to the surface chemistry of ALD are described from a generic viewpoint applicable to all ALD processes based on compound reactants. This description includes physicochemical requirements for self-terminating reactions,reaction kinetics, typical chemisorption mechanisms, factors causing saturation, reasons for growth of less than a monolayer per cycle, effect of the temperature and number of cycles on the growth per cycle (GPC), and the growth mode. A comparison is made of three models available for estimating the sterically allowed value of GPC in ALD. Third, the experimental information on the surface chemistry in the trimethylaluminum/water ALD process are reviewed using the concepts developed in the second part of this review. The results are reviewed critically, with an aim to combine the information obtained in different types of investigations, such as growth experiments on flat substrates and reaction chemistry investigation on high-surface-area materials. Although the surface chemistry of the trimethylaluminum/water ALD process is rather well understood, systematic investigations of the reaction kinetics and the growth mode on different substrates are still missing. The last part of the review is devoted to discussing issues which may hamper surface chemistry investigations of ALD, such as problematic historical assumptions, nonstandard terminology, and the effect of experimental conditions on the surface chemistry of ALD. I hope that this review can help the newcomer get acquainted with the exciting and challenging field of surface chemistry of ALD and can serve as a useful guide for the specialist towards the fifth decade of ALD research.

Metallic implant biomaterials

Abstract: Human tissue is structured mainly of self-assembled polymers (proteins) and ceramics (bone minerals), with metals present as trace elements with molecular scale functions. However, metals and their alloys have played a predominant role as structural biomaterials in reconstructive surgery, especially orthopedics, with more recent uses in non-osseous tissues, such as blood vessels. With the successful routine use of a large variety of metal implants clinically, issues associated with long-term maintenance of implant integrity have also emerged. This review focuses on metallic implant biomaterials, identifying and discussing critical issues in their clinical applications, including the systemic toxicity of released metal ions due to corrosion, fatigue failure of structural components due to repeated loading, and wearing of joint replacements due to movement. This is followed by detailed reviews on specific metallic biomaterials made from stainless steels, alloys of cobalt, titanium and magnesium, as well as shape memory alloys of nickel–titanium, silver, tantalum and zirconium. For each, the properties that affect biocompatibility and mechanical integrity (especially corrosion fatigue) are discussed in detail. Finally, the most critical challenges for metallic implant biomaterials are summarized, with emphasis on the most promising approaches and strategies.

Semiconductor device, and manufacturing method thereof

Abstract: An object is to provide a semiconductor device of which a manufacturing process is not complicated and by which cost can be suppressed, by forming a thin film transistor using an oxide semiconductor film typified by zinc oxide, and a manufacturing method thereof. For the semiconductor device, a gate electrode is formed over a substrate; a gate insulating film is formed covering the gate electrode; an oxide semiconductor film is formed over the gate insulating film; and a first conductive film and a second conductive film are formed over the oxide semiconductor film. The oxide semiconductor film has at least a crystallized region in a channel region.