Kazuki Mori

Bio: Kazuki Mori is an academic researcher from Yokohama National University. The author has contributed to research in topics: Ionic liquid & Molecular dynamics. The author has an hindex of 6, co-authored 17 publications receiving 135 citations.

Hydrophobic Protic Ionic Liquid for Nonhumidified Intermediate-temperature Fuel Cells

Abstract: A novel protic ionic liquid ethylmethylpropylammonium nonafluorobutanesulfonate ([empa][NfO]) was found to exhibit hydrophobicity, high ionic conductivity, and facile electroactivity toward hydrogen oxidation and oxygen reduction reactions; these properties make it a suitable electrolyte for nonhumidified intermediate-temperature fuel cells.

Structural and Spectroscopic Characteristics of a Proton-Conductive Ionic Liquid Diethylmethylammonium Trifluoromethanesulfonate [dema][TfOH]

Abstract: Structural specificity including dynamic behavior and stable conformations in the bulk phase of diethylmethylammonium trifluoromethanesulfonate [dema][TfOH], which is assumed to be a prominent ioni...

Evaluation of the mechanical properties of carbon fiber/polymer resin interfaces by molecular simulation

Abstract: Herein, we evaluate the mechanical properties of carbon fiber/polymer interfaces using three types of specimens: carbon fiber/vinyl ester resin, carbon fiber/epoxy resin, and carbon fiber/polyimide...

Development of PolyParGen Software to Facilitate the Determination of Molecular Dynamics Simulation Parameters for Polymers

Abstract: In the case that the parameters to describe the force field, such as bond angles and charges, cannot be added to the library of a molecular dynamics (MD) simulation, self-development of the force field should be considered by performing quantum mechanics calculations and/or utilizing an automatic parameter generation tool. However, these techniques are not suitable for macromolecules with a large number of atoms. Typically, the force field of an oligomer containing three unit structures (a unit at both ends and a repeating unit at the center) is calculated and converted to polymer form (both ends + central part × n). Considering this, we recently developed the program o2p, which is a semi-automated program designed to set up the force field for polymers with repeating structures. However, it is difficult to apply this method to macromolecules with complex repeating structures. Thus, in this project, we developed PolyParGen, a new open-source automatic force field generation program for Gromacs that can relatively easily and reliably simulate the MD of complex macromolecules. The proposed program (1) divides the structure of the polymer into substructures with a number of atoms within the limit of the handling size for the automatic parameter generation tool program; then, (2) acquire the parameters for each divided substructure, and finally, (3) combine the parameters of these substructures to obtain the parameters for the whole polymer. By automating these processes, it is possible to acquire a parameter of a polymer having complicated structures. This program was evaluated by simulating the polymers P3EHT and F-P3EHT in chloroform. In agreement with previous reports, fluorination was found to cause F-P3EHT to adopt an extended structure, thereby indicating the effectiveness of the proposed program.

Evaluation of interface properties of carbon fiber/resin using the full atomistic model considering the electric charge state

Abstract: Evaluation of interface strength is important in composite material design such as carbon fiber reinforced plastic. Molecular simulation, which considers aspects such as chemical structure, can be ...

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Application of Ionic Liquids to Energy Storage and Conversion Materials and Devices

Abstract: Ionic liquids (ILs) are liquids consisting entirely of ions and can be further defined as molten salts having melting points lower than 100 °C. One of the most important research areas for IL utilization is undoubtedly their energy application, especially for energy storage and conversion materials and devices, because there is a continuously increasing demand for clean and sustainable energy. In this article, various application of ILs are reviewed by focusing on their use as electrolyte materials for Li/Na ion batteries, Li-sulfur batteries, Li-oxygen batteries, and nonhumidified fuel cells and as carbon precursors for electrode catalysts of fuel cells and electrode materials for batteries and supercapacitors. Due to their characteristic properties such as nonvolatility, high thermal stability, and high ionic conductivity, ILs appear to meet the rigorous demands/criteria of these various applications. However, for further development, specific applications for which these characteristic properties becom...

Protic Ionic Liquids: Evolving Structure–Property Relationships and Expanding Applications

Abstract: The thermal and physicochemical properties of protic ionic liquids (PILs) are reported. It is highly evident that there has been an extensive range of alkylammonium, imidazolium, and heterocyclic cations paired with many organic and inorganic anions that have been employed to prepare PILs. There has been strong interest in modifying the properties of PILs through the addition of water or other molecular solvents. For many applications, the presence of some water in the PILs is not detrimental, and instead leads to enhanced solvent properties such as lower viscosity, higher conductivities, and lower melting points. It remains an issue of definition though of how to refer to these resulting protic solutions. There is also an ongoing difficulty surrounding how to describe the proton activity in the PILs, analogous to pH in aqueous systems. For a broad range of applications, it has been reported that the acidity/basicity of the PIL or PIL-solvent system is crucial for their beneficial properties. It is expected that the fundamental properties of PILs will continue to be explored, along with continued interest in many existing and new applications, such as in electrochemistry, organic and inorganic synthesis, and biological applications. In particular, there has been a significant interest in a broad- range of PILs for use as electrolytes and incorporation in polymer electrolytes for fuel cells, and other energy storage devices.

Acidic Ionic Liquids.

Abstract: Ionic liquid with acidic properties is an important branch in the wide ionic liquid field and the aim of this article is to cover all aspects of these acidic ionic liquids, especially focusing on the developments in the last four years. The structural diversity and synthesis of acidic ionic liquids are discussed in the introduction sections of this review. In addition, an unambiguous classification system for various types of acidic ionic liquids is presented in the introduction. The physical properties including acidity, thermo-physical properties, ionic conductivity, spectroscopy, and computational studies on acidic ionic liquids are covered in the next sections. The final section provides a comprehensive review on applications of acidic ionic liquids in a wide array of fields including catalysis, CO2 fixation, ionogel, electrolyte, fuel-cell, membrane, biomass processing, biodiesel synthesis, desulfurization of gasoline/diesel, metal processing, and metal electrodeposition.

Nonhumidified Intermediate Temperature Fuel Cells Using Protic Ionic Liquids

Abstract: In this paper, the characterization of a protic ionic liquid, diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]), as a proton conductor for a fuel cell and the fabrication of a membrane-type fuel cell system using [dema][TfO] under nonhumidified conditions at intermediate temperatures are described in detail. In terms of physicochemical and electrochemical properties, [dema][TfO] exhibits high activity for fuel cell electrode reactions (i.e., the hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR)) at a Pt electrode, and the open circuit voltage (OCV) of a liquid fuel cell is 1.03 V at 150 degrees C, as has reported in ref 27. However, diethylmethylammonium bis(trifluoromethane sulfonyl)amide ([dema][NTf(2)]) has relatively low HOR and ORR activity, and thus, the OCV is ca. 0.7 V, although [dema][NTf(2)] and [dema][TfO] have an identical cation ([dema]) and similar thermal and bulk-transport properties. Proton conduction occurs mainly via the vehicle mechanism in [dema][TfO] and the proton transference number (t(+)) is 0.5-0.6. This relatively low t(+) appears to be more disadvantageous for a proton conductor than for other electrolytes such as hydrated sulfonated polymer electrolyte membranes (t(+) = 1.0). However, fast proton-exchange reactions occur between ammonium cations and amines in a model compound. This indicates that the proton-exchange mechanism contributes to the fuel cell system under operation, where deprotonated amines are continuously generated by the cathodic reaction, and that polarization of the cell is avoided. Six-membered sulfonated polyimides in the diethylmethylammonium form exhibit excellent compatibility with [dema][TfO]. The composite membranes can be obtained up to a [dema][TfO] content of 80 wt % and exhibit good thermal stability, high ionic conductivity, and mechanical strength and gas permeation comparable to those of hydrated Nafion. H(2)/O(2) fuel cells prepared using the composite membranes can successfully operate at temperatures from 30 to 140 degrees C under nonhumidified conditions, and a current density of 250 mA cm(-2) is achieved at 120 degrees C. The protic ionic liquid and its composite membrane are a possible candidate for an electrolyte of a H(2)/O(2) fuel cell that operates under nonhumidified conditions.