Kelvin G. Lynn

Bio: Kelvin G. Lynn is an academic researcher from Washington State University. The author has contributed to research in topics: Positron & Positron annihilation spectroscopy. The author has an hindex of 47, co-authored 453 publications receiving 9665 citations. Previous affiliations of Kelvin G. Lynn include Philips & University of Utah.

Interaction of positron beams with surfaces, thin films, and interfaces

Abstract: Recent advances in the study of solid surfaces and thin films using variable-energy positron beams are reviewed. In the first part the authors discuss the process of positron moderation and technical aspects of positron beam production and application. The second part is (roughly) organized in sections that apply to increasing time scales appropriate to the positron-solid interaction. These are (a) first encounter and scattering effects, (b) energy loss and stopping profiles, (c) diffusion of thermalized positrons, (d) positron-surface interactions, and (e) studies of defects near surfaces and interfaces. The review is written with more emphasis on the most recent measurements and interpretations than on the chronology of various developments.

Increased Elemental Specificity of Positron Annihilation Spectra.

Abstract: Positron annihilation spectroscopy (PAS) is a sensitive probe for studying the electronic structure of defects in solids. We show that the high-momentum part of the Doppler-broadened annihilation spectra can be used to distinguish different elements. This is achieved by using a new two-detector coincidence system to examine the line shape variations originating from high-momentum core electrons. Because the core electrons retain their atomic character even when atoms form a solid, these results can be directly compared to simple theoretical predictions. The new approach adds increased elemental specificity to the PAS technique, and is useful in studying the elemental variations around a defect site.

Nature of native defects in ZnO.

Abstract: This study revealed the nature of native defects and their roles in ZnO through positron annihilation and optical transmission measurements. It showed oxygen vacancies are the origin for the shift in the optical absorption band that causes the red or orange coloration. It also revealed experimental evidence that the donor nature of oxygen vacancy is approximately 0.7 eV. In addition, this work showed the Zn interstitial was not the donor in the as-grown ZnO and supported recent calculations that predicted hydrogen in an oxygen vacancy forms multicenter bonds and acts as a shallow donor.

CdTe solar cells with open-circuit voltage breaking the 1 V barrier

Abstract: CdTe solar cells have the potential to undercut the costs of electricity generated by other technologies, if the open-circuit voltage can be increased beyond 1 V without significant decreases in current. However, in the past decades, the open-circuit voltage has stagnated at around 800–900 mV. This is lower than in GaAs solar cells, even though GaAs has a smaller bandgap; this is because it is more difficult to achieve simultaneously high hole density and lifetime in II–VI materials than in III–V materials. Here, by doping the CdTe with a Group V element, we report lifetimes in single-crystal CdTe that are nearly radiatively limited and comparable to those in GaAs over a hole density range relevant for solar applications. Furthermore, the deposition on CdTe of nanocrystalline CdS layers that form non-ideal heterointerfaces with 10% lattice mismatch impart no damage to the CdTe surface and show excellent junction transport properties. These results enable the fabrication of CdTe solar cells with open-circuit voltage greater than 1 V. Solar cells based on CdTe are a promising low-cost alternative to mainstream Si devices, but they usually produce voltages below 900 mV. Burst et al. now show that open-circuit voltages greater than 1 V can be achieved by doping the CdTe with a group V element.

Characterization of defects in Si and SiO2−Si using positrons

Abstract: In the past few years, there has been rapid growth in the positron annihilation spectroscopy (PAS) of overlayers, interfaces, and buried regions of semiconductors. There are few other techniques that are as sensitive as PAS to low concentrations of open‐volume‐type defects. The characteristics of the annihilation gamma rays depend strongly on the local environment of the annihilation sites and are used to probe defect concentrations in a range inaccessible to conventional defect probes, yet which are important in the electrical performance of device structures. We show how PAS can be used as a nondestructive probe to examine defects in technologically important Si‐based structures. The discussion will focus on the quality of overlayers, formation and annealing of defects after ion implantation, identification of defect complexes, and evaluation of the distribution of internal electric fields. We describe investigations of the activation energy for the detrapping of hydrogen from SiO2−Si interface trap centers, variations of interface trap density, hole trapping at SiO2−Si interfaces, and radiation damage in SiO2−Si systems. We also briefly summarize the use of PAS in compound semiconductor systems and suggest some future directions.

A comprehensive review of zno materials and devices

Abstract: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature. Even though research focusing on ZnO goes back many decades, the renewed interest is fueled by availability of high-quality substrates and reports of p-type conduction and ferromagnetic behavior when doped with transitions metals, both of which remain controversial. It is this renewed interest in ZnO which forms the basis of this review. As mentioned already, ZnO is not new to the semiconductor field, with studies of its lattice parameter dating back to 1935 by Bunn [Proc. Phys. Soc. London 47, 836 (1935)], studies of its vibrational properties with Raman scattering in 1966 by Damen et al. [Phys. Rev. 142, 570 (1966)], detailed optical studies in 1954 by Mollwo [Z. Angew. Phys. 6, 257 (1954)], and its growth by chemical-vapor transport in 1970 by Galli and Coker [Appl. Phys. ...

Phd by thesis

Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Spin glasses: Experimental facts, theoretical concepts, and open questions

Abstract: This review summarizes recent developments in the theory of spin glasses, as well as pertinent experimental data. The most characteristic properties of spin glass systems are described, and related phenomena in other glassy systems (dielectric and orientational glasses) are mentioned. The Edwards-Anderson model of spin glasses and its treatment within the replica method and mean-field theory are outlined, and concepts such as "frustration," "broken replica symmetry," "broken ergodicity," etc., are discussed. The dynamic approach to describing the spin glass transition is emphasized. Monte Carlo simulations of spin glasses and the insight gained by them are described. Other topics discussed include site-disorder models, phenomenological theories for the frozen phase and its excitations, phase diagrams in which spin glass order and ferromagnetism or antiferromagnetism compete, the Ne\'el model of superparamagnetism and related approaches, and possible connections between spin glasses and other topics in the theory of disordered condensed-matter systems.

Fundamentals of zinc oxide as a semiconductor

Abstract: In the past ten years we have witnessed a revival of, and subsequent rapid expansion in, the research on zinc oxide (ZnO) as a semiconductor. Being initially considered as a substrate for GaN and related alloys, the availability of high-quality large bulk single crystals, the strong luminescence demonstrated in optically pumped lasers and the prospects of gaining control over its electrical conductivity have led a large number of groups to turn their research for electronic and photonic devices to ZnO in its own right. The high electron mobility, high thermal conductivity, wide and direct band gap and large exciton binding energy make ZnO suitable for a wide range of devices, including transparent thin-film transistors, photodetectors, light-emitting diodes and laser diodes that operate in the blue and ultraviolet region of the spectrum. In spite of the recent rapid developments, controlling the electrical conductivity of ZnO has remained a major challenge. While a number of research groups have reported achieving p-type ZnO, there are still problems concerning the reproducibility of the results and the stability of the p-type conductivity. Even the cause of the commonly observed unintentional n-type conductivity in as-grown ZnO is still under debate. One approach to address these issues consists of growing high-quality single crystalline bulk and thin films in which the concentrations of impurities and intrinsic defects are controlled. In this review we discuss the status of ZnO as a semiconductor. We first discuss the growth of bulk and epitaxial films, growth conditions and their influence on the incorporation of native defects and impurities. We then present the theory of doping and native defects in ZnO based on density-functional calculations, discussing the stability and electronic structure of native point defects and impurities and their influence on the electrical conductivity and optical properties of ZnO. We pay special attention to the possible causes of the unintentional n-type conductivity, emphasize the role of impurities, critically review the current status of p-type doping and address possible routes to controlling the electrical conductivity in ZnO. Finally, we discuss band-gap engineering using MgZnO and CdZnO alloys.

1000 at 1000: The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method.

Abstract: The use of electric current to activate the consolidation and reaction-sintering of materials is reviewed with special emphasis of the spark plasma sintering method. The method has been used extensively over the past decade with results showing clear benefits over conventional methods. The review critically examines the important features of this method and their individual roles in the observed enhancement of the consolidation process and the properties of the resulting materials.