The influence of diet on the distribution of nitrogen isotopes in animals was investigated by analyzing animals grown in the laboratory on diets of constant nitrogen isotopic composition. 
The isotopic composition of the nitrogen in an animal reflects the nitrogen isotopic composition of its diet. The δ^(15)N values of the whole bodies of animals are usually more positive than those of their diets. Different individuals of a species raised on the same diet can have significantly different δ^(15)N values. The variability of the relationship between the δ^(15)N values of animals and their diets is greater for different species raised on the same diet than for the same species raised on different diets. Different tissues of mice are also enriched in ^(15)N relative to the diet, with the difference between the δ^(15)N values of a tissue and the diet depending on both the kind of tissue and the diet involved. The δ^(15)N values of collagen and chitin, biochemical components that are often preserved in fossil animal remains, are also related to the δ^(15)N value of the diet. 
The dependence of the δ^(15)N values of whole animals and their tissues and biochemical components on the δ^(15)N value of diet indicates that the isotopic composition of animal nitrogen can be used to obtain information about an animal's diet if its potential food sources had different δ^(15)N values. The nitrogen isotopic method of dietary analysis probably can be used to estimate the relative use of legumes vs non-legumes or of aquatic vs terrestrial organisms as food sources for extant and fossil animals. However, the method probably will not be applicable in those modern ecosystems in which the use of chemical fertilizers has influenced the distribution of nitrogen isotopes in food sources. 
The isotopic method of dietary analysis was used to reconstruct changes in the diet of the human population that occupied the Tehuacan Valley of Mexico over a 7000 yr span. Variations in the δ^(15)C and δ^(15)N values of bone collagen suggest that C_4 and/or CAM plants (presumably mostly corn) and legumes (presumably mostly beans) were introduced into the diet much earlier than suggested by conventional archaeological analysis.

Influence of Diet On the Distribtion of Nitrogen Isotopes in Animals

This book is written as a reference on organic substances in natural waters and as a supplementary text for graduate students in water chemistry. The chapters address five topics: amount, origin, nature, geochemistry, and characterization of organic carbon. Of these topics, the main themes are the amount and nature of dissolved organic carbon in natural waters (mainly fresh water, although seawater is briefly discussed). It is hoped that the reader is familiar with organic chemistry, but it is not necessary. The first part of the book is a general overview of the amount and general nature of dissolved organic carbon. Over the past 10 years there has been an exponential increase in knowledge on organic substances in water, which is the result of money directed toward the research of organic compounds, of new methods of analysis (such as gas chromatography and mass spectrometry), and most importantly, the result of more people working in this field. Because of this exponential increase in knowledge, there is a need to pull together and summarize the data that has accumulated from many disciplines over the last decade.

Organic geochemistry of natural waters

Shale-gas resource plays can be distinguished by gas type and system characteristics. The Newark East gas field, located in the Fort Worth Basin, Texas, is defined by thermogenic gas production from low-porosity and low-permeability Barnett Shale. The Barnett Shale gas system, a self-contained source-reservoir system, has generated large amounts of gas in the key productive areas because of various characteristics and processes, including (1) excellent original organic richness and generation potential; (2) primary and secondary cracking of kerogen and retained oil, respectively; (3) retention of oil for cracking to gas by adsorption; (4) porosity resulting from organic matter decomposition; and (5) brittle mineralogical composition. The calculated total gas in place (GIP) based on estimated ultimate recovery that is based on production profiles and operator estimates is about 204 bcf/section (5.78 × 10 9 m 3 /1.73 × 10 4 m 3 ). We estimate that the Barnett Shale has a total generation potential of about 609 bbl of oil equivalent/ac-ft or the equivalent of 3657 mcf/ac-ft (84.0 m 3 /m 3 ). Assuming a thickness of 350 ft (107 m) and only sufficient hydrogen for partial cracking of retained oil to gas, a total generation potential of 820 bcf/section is estimated. Of this potential, approximately 60% was expelled, and the balance was retained for secondary cracking of oil to gas, if sufficient thermal maturity was reached. Gas storage capacity of the Barnett Shale at typical reservoir pressure, volume, and temperature conditions and 6% porosity shows a maximum storage capacity of 540 mcf/ac-ft or 159 scf/ton.

/pdf/unconventional-shale-gas-systems-the-mississippian-barnett-2w1ilks6bo.pdf

Unconventional shale-gas systems: The Mississippian Barnett Shale of north-central Texas as one model for thermogenic shale-gas assessment

Research on mudrock attributes has increased dramatically since shale-gas systems have become commercial hydrocarbon production targets. One of the most significant research questions now being asked focuses on the nature of the pore system in these mudrocks. Our work on siliceous mudstones from the Mississippian Barnett Shale of the Fort Worth Basin, Texas, shows that the pores in these rocks are dominantly nanometer in scale (nanopores). We used scanning electron microscopy to characterize Barnett pores from a number of cores and have imaged pores as small as 5 nm. Key to our success in imaging these nanopores is the use of Ar-ion-beam milling; this methodology provides flat surfaces that lack topography related to differential hardness and are fundamental for high-magnification imaging.

Nanopores are observed in three main modes of occurrence. Most pores are found in grains of organic matter as intraparticle pores; many of these grains contain hundreds of pores. Intraparticle organic nanopores most commonly have irregular, bubblelike, elliptical cross sections and range between 5 and 750 nm with the median nanopore size for all grains being approximately 100 nm. Internal porosities of up to 20.2% have been measured for whole grains of organic matter based on point-count data from scanning electron microscopy analysis. These nanopores in the organic matter are the predominant pore type in the Barnett mudstones and they are related to thermal maturation.

Nanopores are also found in bedding-parallel, wispy, organic-rich laminae as intraparticle pores in organic grains and as interparticle pores between organic matter, but this mode is not common. Although less abundant, nanopores are also locally present in fine-grained matrix areas unassociated with organic matter and as nano- to microintercrystalline pores in pyrite framboids.

Intraparticle organic nanopores and pyrite-framboid intercrystalline pores contribute to gas storage in Barnett mudstones. We postulate that permeability pathways within the Barnett mudstones are along bedding-parallel layers of organic matter or a mesh network of organic matter flakes because this material contains the most pores.

Morphology, Genesis, and Distribution of Nanometer-Scale Pores in Siliceous Mudstones of the Mississippian Barnett Shale

The second edition of The Biomarker Guide is a fully updated and expanded version of this essential reference. Now in two volumes, it provides a comprehensive account of the role that biomarker technology plays both in petroleum exploration and in understanding Earth history and processes. Biomarkers and Isotopes in the Environment and Human History details the origins of biomarkers and introduces basic chemical principles relevant to their study. It discusses analytical techniques, and applications of biomarkers to environmental and archaeological problems. The Biomarker Guide is an invaluable resource for geologists, petroleum geochemists, biogeochemists, environmental scientists and archaeologists.

The Biomarker Guide

Rock-Eval pyrolysis is used to rapidly evaluate the petroleum-generative potential and thermal maturity of rocks. Accurate conclusions require programs every 30-60 ft (9-18 m), understanding of interpretive pitfalls, and supporting data, such as visual kerogen, vitrinite reflectance, and elemental analyses. The generative potential of coals is commonly overestimated by pyrolysis and is best determined by elemental analysis and organic petrography. Most coals show high S2/S3 (>5) and low HI values (< 300 mg HC/g TOC). Migrated oil and mud additives, which alter Rock-Eval data, can sometimes be removed by special processing. For immature rocks, bimodal S2 peaks and PI values over 0.2 indicate contamination. Pyrolysis downgrades organic-poor, clay-rich rocks, which show lower HI and higher Tmax values than isolated kerogen because of adsorption of pyrolyzate on the clays. Tmax values for small S2 peaks (< 0.2 mg HC/g TOC) are unreliable. Tmax is affected by maturation, organic matter type, contamination, and the mineral matrix. S3 is sensitive to inorganic and adsorbed carbon dioxide, and to instrumentation problems. Acidification of carbonate-rich samples and proper maintenance improves S3 measurement. Constant sample weights (100 mg) are recommended. Below a threshold weight, Tmax increases by up to 10°C, and other parameters decrease. Organic-rich samples, which overload the detector, can be diluted with carbonate. Detector linearity is determined by pyrolyzing various weights of an organic-rich rock.

Guidelines for Evaluating Petroleum Source Rock Using Programmed Pyrolysis

This indispensable reference provides the only comprehensive discussion of biomarkers and how they are used with other geochemical methods to reduce the risk associated with exploration for petroleum. The guide brings together information on biomarkers and related technology that is now disseminated in hundreds of research papers, and creates general guidelines for the use of selected parameters. For a broad audience including company exploration geologies, geochemists, geochemical coordinators, and managers.

Kenneth E. Peters

Papers

The Biomarker Guide

Guidelines for Evaluating Petroleum Source Rock Using Programmed Pyrolysis

The Biomarker Guide: Interpreting Molecular Fossils in Petroleum and Ancient Sediments

Applied Source Rock Geochemistry

Effects of source, thermal maturity, and biodegradation on the distribution and isomerization of homohopanes in petroleum