Khalid Al-Bahily

Bio: Khalid Al-Bahily is an academic researcher from SABIC. The author has contributed to research in topics: Catalysis & Nitride. The author has an hindex of 24, co-authored 76 publications receiving 2418 citations. Previous affiliations of Khalid Al-Bahily include Texas A&M University & Eindhoven University of Technology.

Recent advances in functionalized micro and mesoporous carbon materials: synthesis and applications

Abstract: Functionalized nanoporous carbon materials have attracted the colossal interest of the materials science fraternity owing to their intriguing physical and chemical properties including a well-ordered porous structure, exemplary high specific surface areas, electronic and ionic conductivity, excellent accessibility to active sites, and enhanced mass transport and diffusion. These properties make them a special and unique choice for various applications in divergent fields such as energy storage batteries, supercapacitors, energy conversion fuel cells, adsorption/separation of bulky molecules, heterogeneous catalysts, catalyst supports, photocatalysis, carbon capture, gas storage, biomolecule detection, vapour sensing and drug delivery. Because of the anisotropic and synergistic effects arising from the heteroatom doping at the nanoscale, these novel materials show high potential especially in electrochemical applications such as batteries, supercapacitors and electrocatalysts for fuel cell applications and water electrolysis. In order to gain the optimal benefit, it is necessary to implement tailor made functionalities in the porous carbon surfaces as well as in the carbon skeleton through the comprehensive experimentation. These most appealing nanoporous carbon materials can be synthesized through the carbonization of high carbon containing molecular precursors by using soft or hard templating or non-templating pathways. This review encompasses the approaches and the wide range of methodologies that have been employed over the last five years in the preparation and functionalisation of nanoporous carbon materials via incorporation of metals, non-metal heteroatoms, multiple heteroatoms, and various surface functional groups that mostly dictate their place in a wide range of practical applications.

Mesoporous carbon nitrides: synthesis, functionalization, and applications

Abstract: Mesoporous carbon nitrides (MCNs) with large surface areas and uniform pore diameters are unique semiconducting materials and exhibit highly versatile structural and excellent physicochemical properties, which promote their application in diverse fields such as metal free catalysis, photocatalytic water splitting, energy storage and conversion, gas adsorption, separation, and even sensing. These fascinating MCN materials can be obtained through the polymerization of different aromatic and/or aliphatic carbons and high nitrogen containing molecular precursors via hard and/or soft templating approaches. One of the unique characteristics of these materials is that they exhibit both semiconducting and basic properties, which make them excellent platforms for the photoelectrochemical conversion and sensing of molecules such as CO2, and the selective sensing of toxic organic acids. The semiconducting features of these materials are finely controlled by varying the nitrogen content or local electronic structure of the MCNs. The incorporation of different functionalities including metal nanoparticles or organic molecules is further achieved in various ways to develop new electronic, semiconducting, catalytic, and energy harvesting materials. Dual functionalities including acidic and basic groups are also introduced in the wall structure of MCNs through simple UV-light irradiation, which offers enzyme-like properties in a single MCN system. In this review article, we summarize and highlight the existing literature covering every aspect of MCNs including their templating synthesis, modification and functionalization, and potential applications of these MCN materials with an overview of the key and relevant results. A special emphasis is given on the catalytic applications of MCNs including hydrogenation, oxidation, photocatalysis, and CO2 activation.

Emerging trends in porous materials for CO2 capture and conversion

Abstract: The presence of an excessive concentration of CO2 in the atmosphere needs to be curbed with suitable measures including the reduction of CO2 emissions at stationary point sources such as power plants through carbon capture technologies and subsequent conversion of the captured CO2 into non-polluting clean fuels/chemicals using photo and/or electrocatalytic pathways. Porous materials have attracted much attention for carbon capture and in the recent past; they have witnessed significant advancements in their design and implementation for CO2 capture and conversion. In this context, the emerging trends in major porous adsorbents such as MOFs, zeolites, POPs, porous carbons, and mesoporous materials for CO2 capture and conversion are discussed. Their surface texture and chemistry, and the influence of various other features on their efficiency, selectivity, and recyclability for CO2 capture and conversion are explained and compared thoroughly. The scientific and technical advances on the material structure versus CO2 capture and conversion provide deep insights into designing effective porous materials. The review concludes with a summary, which compiles the key challenges in the field, current trends and critical challenges in the development of porous materials, and future research directions combined with possible solutions for realising the deployment of porous materials in CO2 capture and conversion.

Highly Ordered Nitrogen-Rich Mesoporous Carbon Nitrides and Their Superior Performance for Sensing and Photocatalytic Hydrogen Generation.

Abstract: Mesoporous carbon nitrides (MCN) are fascinating materials with unique semiconducting and basic properties that are useful in many applications including photocatalysis and sensing. Most syntheses of MCN focus on creating theoretically predicted C3N4 stoichiometry with a band gap of 2.7 eV using a nano-hard templating approach with triazine-based precursors. However, the performance of the MCN in semiconducting applications is limited to the MCN framework with a small band gap, which would be linked with the addition of more N in the CN framework, but this remains a huge challenge. Here, we report a precursor with high nitrogen content, 3-amino-1,2,4-triazole, that enables the formation of new and well-ordered 3D MCN with C3N5 stoichiometry (MCN-8), which has not been predicted so far, and a low-band-gap energy (2.2 eV). This novel class of material without addition of any dopants shows not only a superior photocatalytic water-splitting performance with a total of 801 μmol of H2 under visible-light irradiation for 3 h but also excellent sensing properties for toxic acids.

Particulate Photocatalysts for Light-Driven Water Splitting: Mechanisms, Challenges, and Design Strategies

Abstract: Solar-driven water splitting provides a leading approach to store the abundant yet intermittent solar energy and produce hydrogen as a clean and sustainable energy carrier. A straightforward route to light-driven water splitting is to apply self-supported particulate photocatalysts, which is expected to allow solar hydrogen to be competitive with fossil-fuel-derived hydrogen on a levelized cost basis. More importantly, the powder-based systems can lend themselves to making functional panels on a large scale while retaining the intrinsic activity of the photocatalyst. However, all attempts to generate hydrogen via powder-based solar water-splitting systems to date have unfortunately fallen short of the efficiency values required for practical applications. Photocatalysis on photocatalyst particles involves three sequential steps: (i) absorption of photons with higher energies than the bandgap of the photocatalysts, leading to the excitation of electron-hole pairs in the particles, (ii) charge separation and migration of these photoexcited carriers, and (iii) surface chemical reactions based on these carriers. In this review, we focus on the challenges of each step and summarize material design strategies to overcome the obstacles and limitations. This review illustrates that it is possible to employ the fundamental principles underlying photosynthesis and the tools of chemical and materials science to design and prepare photocatalysts for overall water splitting.

Recent advances in functionalized micro and mesoporous carbon materials: synthesis and applications

Abstract: Functionalized nanoporous carbon materials have attracted the colossal interest of the materials science fraternity owing to their intriguing physical and chemical properties including a well-ordered porous structure, exemplary high specific surface areas, electronic and ionic conductivity, excellent accessibility to active sites, and enhanced mass transport and diffusion. These properties make them a special and unique choice for various applications in divergent fields such as energy storage batteries, supercapacitors, energy conversion fuel cells, adsorption/separation of bulky molecules, heterogeneous catalysts, catalyst supports, photocatalysis, carbon capture, gas storage, biomolecule detection, vapour sensing and drug delivery. Because of the anisotropic and synergistic effects arising from the heteroatom doping at the nanoscale, these novel materials show high potential especially in electrochemical applications such as batteries, supercapacitors and electrocatalysts for fuel cell applications and water electrolysis. In order to gain the optimal benefit, it is necessary to implement tailor made functionalities in the porous carbon surfaces as well as in the carbon skeleton through the comprehensive experimentation. These most appealing nanoporous carbon materials can be synthesized through the carbonization of high carbon containing molecular precursors by using soft or hard templating or non-templating pathways. This review encompasses the approaches and the wide range of methodologies that have been employed over the last five years in the preparation and functionalisation of nanoporous carbon materials via incorporation of metals, non-metal heteroatoms, multiple heteroatoms, and various surface functional groups that mostly dictate their place in a wide range of practical applications.

Nanomaterials: a review of synthesis methods, properties, recent progress, and challenges

Abstract: Nanomaterials have emerged as an amazing class of materials that consists of a broad spectrum of examples with at least one dimension in the range of 1 to 100 nm. Exceptionally high surface areas can be achieved through the rational design of nanomaterials. Nanomaterials can be produced with outstanding magnetic, electrical, optical, mechanical, and catalytic properties that are substantially different from their bulk counterparts. The nanomaterial properties can be tuned as desired via precisely controlling the size, shape, synthesis conditions, and appropriate functionalization. This review discusses a brief history of nanomaterials and their use throughout history to trigger advances in nanotechnology development. In particular, we describe and define various terms relating to nanomaterials. Various nanomaterial synthesis methods, including top-down and bottom-up approaches, are discussed. The unique features of nanomaterials are highlighted throughout the review. This review describes advances in nanomaterials, specifically fullerenes, carbon nanotubes, graphene, carbon quantum dots, nanodiamonds, carbon nanohorns, nanoporous materials, core–shell nanoparticles, silicene, antimonene, MXenes, 2D MOF nanosheets, boron nitride nanosheets, layered double hydroxides, and metal-based nanomaterials. Finally, we conclude by discussing challenges and future perspectives relating to nanomaterials.

Optimizing Optical Absorption, Exciton Dissociation, and Charge Transfer of a Polymeric Carbon Nitride with Ultrahigh Solar Hydrogen Production Activity.

Abstract: Polymeric or organic semiconductors are promising candidates for photocatalysis but mostly only show moderate activity owing to strongly bound excitons and insufficient optical absorption. Herein, we report a facile bottom-up strategy to improve the activity of a carbon nitride to a level in which a majority of photons are really used to drive photoredox chemistry. Co-condensation of urea and oxamide followed by post-calcination in molten salt is shown to result in highly crystalline species with a maximum π–π layer stacking distance of heptazine units of 0.292 nm, which improves lateral charge transport and interlayer exciton dissociation. The addition of oxamide decreases the optical band gap from 2.74 to 2.56 eV, which enables efficient photochemistry also with green light. The apparent quantum yield (AQY) for H2 evolution of optimal samples reaches 57 % and 10 % at 420 nm and 525 nm, respectively, which is significantly higher than in most previous experiments.

Olefin oligomerization via metallacycles: dimerization, trimerization, tetramerization, and beyond.

Abstract: Recent advances in the area of Olefin Oligomerization via metallacycles that include dimerization, trimerization, tetramerization, and beyond, are reviewed. Studies have found that metallacyclopentane decomposition to 1-butene many not be particularly facile due to the absence of metallacycle expansion. Follow-up studies concentrated on the N-H functionality and the Cr oxidation state and role of MAO show that activities and selectivities to 1-hexene are similar to the original Cr(III) complexes. Nenu and Weckhuysen prepared silica-supported triazacyclohexane complexes, by treating the reduced Phillips polymerization catalyst with triazacyclohexane ligands in dichloromethane. The influence of N-aryl functionality investigated by Killian et al. shows that the selectivity was mainly dependent upon the steric bulk attached to nitrogen, and less so on the group's basicity.