Kiyoshi Fujiwara

Bio: Kiyoshi Fujiwara is an academic researcher from National Institute of Advanced Industrial Science and Technology. The author has contributed to research in topics: Humanoid robot & Robot. The author has an hindex of 29, co-authored 75 publications receiving 5332 citations. Previous affiliations of Kiyoshi Fujiwara include Systems Research Institute.

Biped walking pattern generation by using preview control of zero-moment point

Abstract: We introduce a new method of a biped walking pattern generation by using a preview control of the zero-moment point (ZMP). First, the dynamics of a biped robot is modeled as a running cart on a table which gives a convenient representation to treat ZMP. After reviewing conventional methods of ZMP based pattern generation, we formalize the problem as the design of a ZMP tracking servo controller. It is shown that we can realize such controller by adopting the preview control theory that uses the future reference. It is also shown that a preview controller can be used to compensate the ZMP error caused by the difference between a simple model and the precise multibody model. The effectiveness of the proposed method is demonstrated by a simulation of walking on spiral stairs.

Resolved momentum control: humanoid motion planning based on the linear and angular momentum

Abstract: We introduce a method to generate whole body motion of a humanoid robot such that the resulted total linear/angular momenta become specified values. First, we derive a linear equation, which gives to total momentum of a robot from its physical parameters, the base link speed and the joint speeds. Constraints between the legs and the environment are also considered. The whole body motion is calculated from a given momentum reference by using a pseudo-inverse of the inertia matrix. As examples, we generated the kicking and walking motions and tested on the actual humanoid robot HRP-2. This method, the resolved momentum control, gives us a unified framework to generate various maneuvers of humanoid robots.

A realtime pattern generator for biped walking

Abstract: For real-time walking control of a biped robot, we analyze the dynamics of a three-dimensional inverted pendulum whose motions are constrained onto an arbitrarily defined plane. This analysis leads us a simple linear dynamics, the Three-Dimensional Linear Inverted Pendulum Mode (3D-LIPM). Geometric nature of trajectories under the 3D-LIPM is discussed, and an algorithm for walking pattern generation is presented. Experimental results of real-time walking control of a 12-DOF biped robot HRP-2L using an input device such as a game pad are also shown.

A universal stability criterion of the foot contact of legged robots - adios ZMP

Abstract: This paper proposes a universal stability criterion of the foot contact of legged robots. The proposed method checks if the sum of the gravity and the inertia wrench applied to the COG of the robot, which is proposed to be the stability criterion, is inside the polyhedral convex cone of the contact wrench between the feet of a robot and its environment. The criterion can be used to determine the strong stability of the foot contact when a robot walks on an arbitrary terrain and/or when the hands of the robot are in contact with it under the sufficient friction assumption. The determination is equivalent to check if the ZMP is inside the support polygon of the feet when the robot walks on a horizontal plane with sufficient friction. The criterion can also be used to determine if the foot contact is sufficiently weakly stable when the friction follows a physical law. Therefore, the proposed criterion can be used to judge what the ZMP can, and it can be used in more universal cases

Biped Walking Pattern Generator allowing Auxiliary ZMP Control

Abstract: A biped walking pattern generator which allows an additional ZMP control (auxiliary ZMP) is presented. An auxiliary ZMP is realized by an inverse system added to a pattern generator based on the ZMP preview control. To compensate the effect of the auxiliary ZMP, we apply virtual time shifting of the reference ZMP. As an application of the proposed method, a walking control on uneven terrain is simulated. The simulated robot can walk successfully by changing its walking speed as the side effect of the auxiliary ZMP control.

Biped walking pattern generation by using preview control of zero-moment point

Abstract: We introduce a new method of a biped walking pattern generation by using a preview control of the zero-moment point (ZMP). First, the dynamics of a biped robot is modeled as a running cart on a table which gives a convenient representation to treat ZMP. After reviewing conventional methods of ZMP based pattern generation, we formalize the problem as the design of a ZMP tracking servo controller. It is shown that we can realize such controller by adopting the preview control theory that uses the future reference. It is also shown that a preview controller can be used to compensate the ZMP error caused by the difference between a simple model and the precise multibody model. The effectiveness of the proposed method is demonstrated by a simulation of walking on spiral stairs.

Model Driven Engineering

Abstract: The Object Management Group's (OMG) Model Driven Architecture (MDA) strategy envisages a world where models play a more direct role in software production, being amenable to manipulation and transformation by machine. Model Driven Engineering (MDE) is wider in scope than MDA. MDE combines process and analysis with architecture. This article sets out a framework for model driven engineering, which can be used as a point of reference for activity in this area. It proposes an organisation of the modelling 'space' and how to locate models in that space. It discusses different kinds of mappings between models. It explains why process and architecture are tightly connected. It discusses the importance and nature of tools. It identifies the need for defining families of languages and transformations, and for developing techniques for generating/configuring tools from such definitions. It concludes with a call to align metamodelling with formal language engineering techniques.

Capture Point: A Step toward Humanoid Push Recovery

Abstract: It is known that for a large magnitude push a human or a humanoid robot must take a step to avoid a fall. Despite some scattered results, a principled approach towards "when and where to take a step" has not yet emerged. Towards this goal, we present methods for computing capture points and the capture region, the region on the ground where a humanoid must step to in order to come to a complete stop. The intersection between the capture region and the base of support determines which strategy the robot should adopt to successfully stop in a given situation. Computing the capture region for a humanoid, in general, is very difficult. However, with simple models of walking, computation of the capture region is simplified. We extend the well-known linear inverted pendulum model to include a flywheel body and show how to compute exact solutions of the capture region for this model. Adding rotational inertia enables the humanoid to control its centroidal angular momentum, much like the way human beings do, significantly enlarging the capture region. We present simulations of a simple planar biped that can recover balance after a push by stepping to the capture region and using internal angular momentum. Ongoing work involves applying the solution from the simple model as an approximate solution to more complex simulations of bipedal walking, including a 3D biped with distributed mass.

The 3D linear inverted pendulum mode: a simple modeling for a biped walking pattern generation

Abstract: For 3D walking control of a biped robot we analyze the dynamics of a 3D inverted pendulum in which motion is constrained to move along an arbitrarily defined plane. This analysis yields a simple linear dynamics, the 3D linear inverted pendulum mode (3D-LIPM). Geometric nature of trajectories under the 3D-LIPM and a method for walking pattern generation are discussed. A simulation result of a walking control using a 12-DOF biped robot model is also shown.

Feedback Control of Dynamic Bipedal Robot Locomotion

Abstract: Bipedal locomotion is among the most difficult challenges in control engineering. Most books treat the subject from a quasi-static perspective, overlooking the hybrid nature of bipedal mechanics. Feedback Control of Dynamic Bipedal Robot Locomotion is the first book to present a comprehensive and mathematically sound treatment of feedback design for achieving stable, agile, and efficient locomotion in bipedal robots.In this unique and groundbreaking treatise, expert authors lead you systematically through every step of the process, including:Mathematical modeling of walking and running gaits in planar robotsAnalysis of periodic orbits in hybrid systemsDesign and analysis of feedback systems for achieving stable periodic motionsAlgorithms for synthesizing feedback controllersDetailed simulation examplesExperimental implementations on two bipedal test bedsThe elegance of the authors' approach is evident in the marriage of control theory and mechanics, uniting control-based presentation and mathematical custom with a mechanics-based approach to the problem and computational rendering. Concrete examples and numerous illustrations complement and clarify the mathematical discussion. A supporting Web site offers links to videos of several experiments along with MATLAB® code for several of the models. This one-of-a-kind book builds a solid understanding of the theoretical and practical aspects of truly dynamic locomotion in planar bipedal robots.