Research into terahertz technology is now receiving increasing attention around the world, and devices exploiting this waveband are set to become increasingly important in a very diverse range of applications. Here, an overview of the status of the technology, its uses and its future prospects are presented.

Cutting-edge terahertz technology

The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

http://ieeexplore.ieee.org/iel5/6354/16969/00781867.pdf

Photonic crystals

Terahertz spectroscopy systems use far-infrared radiation to extract molecular spectral information in an otherwise inaccessible portion of the electromagnetic spectrum. Materials research is an essential component of modern terahertz systems: novel, higher-power terahertz sources rely heavily on new materials such as quantum cascade structures. At the same time, terahertz spectroscopy and imaging provide a powerful tool for the characterization of a broad range of materials, including semiconductors and biomolecules.

Materials for terahertz science and technology

Metamaterial structures are taught which provide for the modulation of terahertz frequency signals. Each element within an array of metamaterial (MM) elements comprises multiple loops and at least one gap. The MM elements may comprise resonators with conductive loops and insulated gaps, or the inverse in which insulated loops are present with conductive gaps; each providing useful transmissive control properties. The metamaterial elements are fabricated on a semiconducting substrate configured with a means of enhancing or depleting electrons from near the gaps of the MM elements. An on to off transmissivity ratio of about 0.5 is achieved with this approach. Embodiments are described in which the MM elements incorporated within a Quantum Cascade Laser (QCL) to provide surface emitting (SE) properties.

Active terahertz metamaterial devices

Over the past three decades a new spectroscopic technique with unique possibilities has emerged. Based on coherent and time-resolved detection of the electric field of ultrashort radiation bursts in the far-infrared, this technique has become known as terahertz time-domain spectroscopy (THz-TDS). In this review article the authors describe the technique in its various implementations for static and time-resolved spectroscopy, and illustrate the performance of the technique with recent examples from solid-state physics and physical chemistry as well as aqueous chemistry. Examples from other fields of research, where THz spectroscopic techniques have proven to be useful research tools, and the potential for industrial applications of THz spectroscopic and imaging techniques are discussed.

Terahertz spectroscopy and imaging – Modern techniques and applications

The absence of non-destructive inspection techniques for illicit drugs hidden in mail envelopes has resulted in such drugs being smuggled across international borders freely. We have developed a novel basic technology for terahertz imaging, which allows detection and identification of drugs concealed in envelopes, by introducing the component spatial pattern analysis. The spatial distributions of the targets are obtained from terahertz multispectral transillumination images, using absorption spectra measured with a tunable terahertz-wave source. The samples we used were methamphetamine and MDMA, two of the most widely consumed illegal drugs in Japan, and aspirin as a reference.

https://www.agri.tohoku.ac.jp/thz/jp/71_k02.pdf

Non-destructive terahertz imaging of illicit drugs using spectral fingerprints.

Coherent THz‐wave generation is demonstrated utilizing a grating coupler fabricated on the surface of a LiNbO3 crystal pumped by a Q‐switched Nd:YAG laser. Wide tunability, sharp directivity, and high efficiency were achieved.

Coherent tunable thz-wave generation from linbo3 with monolithic grating coupler

Widely tunable terahertz (THz) wave generation by optical parametric processes based on laser light scattering from the polariton mode of nonlinear crystals is reviewed. Using parametric oscillation of LiNbO3 or MgO-doped LiNbO3 crystal pumped by a nanosecond Q-switched Nd : YAG laser, we have realized widely tunable coherent THz-wave sources in the range between 0.7 and 3 THz, with a simple configuration. For the efficient coupling of the THz wave, a monolithic grating coupler or an Si-prism array coupler was used. We report the detailed characteristics of the oscillation and the radiation, including tunability, spatial and temporal coherency, uni-directivity, and efficiency. Further, Fourier transform limited THz-wave spectrum narrowing was achieved by introducing the injection seeding method. A linewidth of about 100 MHz (0.0033 cm-1) was assured by the absorption spectrum measurement of low-pressure water vapour. At the same time, the THz-wave output was increased hundreds of times higher than that of a conventional generator which has no injection seeder. In addition, a wider tunability was observed using a tunable diode laser as the injection seeder. This room-temperature-operated, tabletop system promises to be a new widely tunable THz-wave source that is suited to a variety of applications.

/pdf/terahertz-wave-parametric-source-2idsbo4p8t.pdf

Terahertz wave parametric source

We present an imaging system designed for use in the terahertz range. As the radiation source a backward-wave oscillator was chosen for its special features such as high output power, good wave-front quality, good stability, and wavelength tunability from 520 to 710 GHz. Detection is achieved with a pyroelectric sensor operated at room temperature. The alignment procedure for the optical elements is described, and several methods to reduce the etalon effect that are inherent in monochromatic sources are discussed. The terahertz spot size in the sample plane is 550 microm (nearly the diffraction limit), and the signal-to-noise ratio is 10,000:1; other characteristics were also measured and are presented in detail. A number of preliminary applications are also shown that cover various areas: nondestructive real-time testing for plastic tubes and packaging seals; biological terahertz imaging of fresh, frozen, or freeze-dried samples; paraffin-embedded specimens of cancer tissue; and measurement of the absorption coefficient of water by use of a wedge-shaped cell.

http://www.imap.www.mtinstruments.com/thzresources/BWO%20THz%20Imaging.pdf

Terahertz imaging system based on a backward-wave oscillator

A label-free biological sensor, which is based on the resonant transmission phenomenon of a thin metallic mesh, is proposed in the terahertz wave region. By using this sensor, we demonstrate the highly sensitive detection of small amounts of protein horseradish peroxidase. For quantitative investigation of the sensitivity of our sensor, horseradish peroxidase was printed on the metallic mesh surface by using a commercial available printer. A distinct shift of the transmission dip frequency is observed for 500pg∕mm2 (11fmol) of horseradish peroxidase printed on the metallic mesh, indicating the significantly high sensitivity of our sensor.

Kodo Kawase

Papers

Non-destructive terahertz imaging of illicit drugs using spectral fingerprints.

Coherent tunable thz-wave generation from linbo3 with monolithic grating coupler

Terahertz wave parametric source

Terahertz imaging system based on a backward-wave oscillator

Terahertz sensing method for protein detection using a thin metallic mesh