A balanced mechanics-materials approach and coverage of the latest developments in biomaterials and electronic materials, the new edition of this popular text is the most thorough and modern book available for upper-level undergraduate courses on the mechanical behavior of materials To ensure that the student gains a thorough understanding the authors present the fundamental mechanisms that operate at micro- and nano-meter level across a wide-range of materials, in a way that is mathematically simple and requires no extensive knowledge of materials This integrated approach provides a conceptual presentation that shows how the microstructure of a material controls its mechanical behavior, and this is reinforced through extensive use of micrographs and illustrations New worked examples and exercises help the student test their understanding Further resources for this title, including lecture slides of select illustrations and solutions for exercises, are available online at wwwcambridgeorg/97800521866758

/pdf/mechanical-behavior-of-materials-244bo22qlo.pdf

Mechanical Behavior of Materials

https://hal.archives-ouvertes.fr/hal-00120432/document

Raman Spectroscopy of Nanomaterials: How Spectra Relate to Disorder, Particle Size and Mechanical Properties

Mechanically alloyed nanocomposites

This review compiles knowledge about the mechanical and structural performance of brittle matrix composites. The overall philosophy recognizes the need for models that allow efficient interpolation between experimental results, as the constituents and the fibre architecture are varied. This approach is necessary because empirical methods are prohibitively expensive. Moreover, the field is not yet mature, though evolving rapidly. Consequently, an attempt is made to provide a framework into which models could be inserted, and then validated by means of an efficient experimental matrix. The most comprehensive available models and the status of experimental assessments are reviewed. The phenomena given emphasis include: the stress/strain behaviour in tension and shear, the ultimate tensile strength and notch sensitivity, fatigue, stress corrosion and creep.

The physics and mechanics of fibre-reinforced brittle matrix composites

Layered manufacturing is an evolution of rapid prototyping (RP) techniques where the part is built in layers. While most of the previous applications focused on building “prototypes”, recent developments in this field enabled some of the prototyping methods to achieve an agile fabrication technology to produce the final product directly. A shift from prototyping to manufacturing of the final product necessitates broadening of the material choice, improvement of the surface quality, dimensional stability, and achieving the necessary mechanical properties to meet the performance criteria. The current study is part of an ongoing project to adapt fused deposition modeling to fabrication of ceramic and multi‐functional components. This paper presents a methodology of the mechanical characterization of products fabricated using fused deposition modeling.

Mechanical characterization of parts fabricated using fused deposition modeling

1. Introduction.- 2. Reinforcements.- 3. Matrix Materials.- 4. Interfaces.- 5. Polymer Matrix Composites.- 6. Metal Matrix Composites.- 7. Ceramic Matrix Composites.- 8. Carbon Fiber/Carbon Matrix Composites.- 9. Multifilamentary Superconducting Composites.- 10. Micromechanics of Composites.- 11. Macromechanics of Composites.- 12. Monotonic Strength and Fracture.- 13. Fatigue and Creep.- 14. Designing with Composites.- 15. Non-Conventional Composites.

Composite Materials: Science and Engineering

In this chapter we consider the results of incorporating a reinforcement (fibers, whiskers, particles, etc.) in a matrix to make a composite. It is of great importance to be able to predict the properties of a composite, given the properties of the components and the geometric arrangement of the components in the composite. We examine various micromechanical aspects of composites. A particularly simple case is the rule-of-mixtures, a rough tool that considers the composite properties as volume-weighted averages of the component properties. It is important to realize that the rule-of-mixtures works in only certain simple situations. Composite density is an example where the rule-of-mixtures is applied readily. In the case of mechanical properties, there are certain restrictions to its applicability. When more precise information is desired, it is better to use more sophisticated approaches based on the theory of elasticity.

Micromechanics of Composites

Long fiber thermoplastic (LFT) composite/metal laminate (LML) is a hybrid composite consisting of alternate layers of metals such as aluminum and an LFT composite, which combines advantages from both the constituents. The LFT/Al laminates (LMLs) were processed by compression molding and were characterized for their Young’s modulus, mechanical strength, and low-velocity impact (LVI) properties. The average values of specific elastic modulus and specific tensile strength were approximately 20 GPa/(gcm−3) and 108.5 MPa/(gcm−3), respectively. Failure mechanisms included delamination between LFT composite and Al, fiber fracture and pullout in LFT composite, and shear fracture of aluminum and LFT composite layers. Rule-of-mixtures (ROM) predictions of laminate properties in tension compared well with the experimental values. Specific perforation energy of the laminates determined by LVI tests was 7.58 J/(kgm−2), which is significantly greater than that of the LFT composite alone, 1.72 J/(kgm−2). Overall, the LML showed significant improvement in the properties as compared to the LFT composite.

Characterization of long fiber thermoplastic/metal laminates

In this work, the effect of ultraviolet (UV) exposure on the microstructure and dynamic Young’s modulus of polypropylene (PP)/21 vol.% E-glass LFT and neat PP was investigated. Microscopic observations revealed that the damage due to UV was confined to the surface region only in the form of surface cracking and exposure of fibers to the surface in the case of long fiber thermoplastic (LFT) and surface cracking in the case of neat PP. Fourier transform infrared spectroscopy showed that the crystallinity of PP in the damaged layer increased, both in neat PP as well as in LFT, with exposure time. This is due to chemicrystallization, which involves rearrangement of amorphous broken polymer chains into crystalline form. Crystallinity of PP in the damaged layer in LFT increased at a higher rate as compared to that in neat PP. Results of nanoindentation showed that the Young’s modulus of the PP in the damaged layer increased, with UV exposure time; the rate of modulus increase being higher in the case of LFT than in neat PP. Although the local Young’s modulus of the degraded layer increased, the dynamic Young’s modulus of the overall composite showed a decrease with UV exposure time.

Effect of UV exposure on the microstructure and mechanical properties of long fiber thermoplastic (LFT) composites

As of 2012, I am officially a septuagenarian. This means that in the eighth decade of my life, much of which has been devoted to fibers, foams, and composites, I am allowed to indulge in some crystal gazing. I would like to take this occasion to reflect on the progress made in these fields of materials. Materials in the form of foams, fibers, and composites cover a very wide range: in biological and manmade materials. In the area of foams, functional and fiber reinforced foams are likely to see a lot of research activity. In the area of fibers, besides carbon fibers based on nanotubes and natural fibers, the real action is in the materials science and engineering of silk fibers. In the larger field of composites, the success of carbon/epoxy composites is epitomized by Boeing 787. Particle reinforced metal matrix composites, continuous alumina fiber reinforced aluminum composites seem very promising, as are techniques such as application of tomography to investigate the material behavior of these composites.

Krishan K. Chawla

Papers

Composite Materials: Science and Engineering

Micromechanics of Composites

Characterization of long fiber thermoplastic/metal laminates

Effect of UV exposure on the microstructure and mechanical properties of long fiber thermoplastic (LFT) composites

Foams, fibers, and composites: Where do we stand?