Kyle Jamieson

Bio: Kyle Jamieson is an academic researcher from Princeton University. The author has contributed to research in topics: Wireless network & Computer science. The author has an hindex of 34, co-authored 96 publications receiving 11122 citations. Previous affiliations of Kyle Jamieson include École Polytechnique Fédérale de Lausanne & Massachusetts Institute of Technology.

Span: An energy-efficient coordination algorithm for topology maintenance in Ad Hoc wireless networks

Abstract: This paper presents Span, a power saving technique for multi-hop ad hoc wireless networks that reduces energy consumption without significantly diminishing the capacity or connectivity of the network. Span builds on the observation that when a region of a shared-channel wireless network bag a sufficient density of nodes, only a small number of them need be on at any time to forward traffic for active connections.Span is a distributed, randomized algorithm where nodes make local decisions on whether to sleep, or to join a forwarding backbone as a coordinator. Each node bases its decision on an estimate of how many of its neighbors will benefit from it being awake, and the amount of energy available to it. We give a randomized algorithm where coordinators rotate with time, demonstrating how localized node decisions lead to a connected, capacity-preserving global topology.Improvement in system lifetime due to Span increases as the ratio of idle-to-sleep energy consumption increases, and increases as the density of the network increases. For example, our simulations show that with a practical energy model, system lifetime of an 802.11 network in power saving mode with Span is a factor of two better than without. Span integrates nicely with 802.11—when run in conjunction with the 802.11 power saving mode, Span improves communication latency, capacity, and system lifetime.

Collection tree protocol

Abstract: This paper presents and evaluates two principles for wireless routing protocols. The first is datapath validation: data traffic quickly discovers and fixes routing inconsistencies. The second is adaptive beaconing: extending the Trickle algorithm to routing control traffic reduces route repair latency and sends fewer beacons.We evaluate datapath validation and adaptive beaconing in CTP Noe, a sensor network tree collection protocol. We use 12 different testbeds ranging in size from 20--310 nodes, comprising seven platforms, and six different link layers, on both interference-free and interference-prone channels. In all cases, CTP Noe delivers > 90% of packets. Many experiments achieve 99.9%. Compared to standard beaconing, CTP Noe sends 73% fewer beacons while reducing topology repair latency by 99.8%. Finally, when using low-power link layers, CTP Noe has duty cycles of 3% while supporting aggregate loads of 30 packets/minute.

Span: an energy-efficient coordination algorithm for topology maintenance in ad hoc wireless networks

Abstract: This paper presents Span, a power saving technique for multi-hop ad hoc wireless networks that reduces energy consumption without significantly diminishing the capacity or connectivity of the network. Span builds on the observation that when a region of a sharedchannel wireless network has a sufficient density of nodes, only a small number of them need be on at any time to forward traffic for active connections. Span is a distributed, randomized algorithm where nodes make local decisions on whether to sleep, or to join a forwarding backbone as a coordinator. Each node bases its decision on an estimate of how many of its neighbors will benefit from it being awake, and the amount of energy available to it. We give a randomized algorithm where coordinators rotate with time, demonstrating how localized node decisions lead to a connected, capacity-preserving global topology. Improvement in system lifetime due to Span increases as the ratio of idle-to-sleep energy consumption increases. Our simulations show that with a practical energy model, system lifetime of an 802.11 network in power saving mode with Span is a factor of two better than without. Additionally, Span also improves communication latency and capacity.

ArrayTrack: A Fine-Grained Indoor Location System

Abstract: With myriad augmented reality, social networking, and retail shopping applications all on the horizon for the mobile handheld, a fast and accurate location technology will become key to a rich user experience. When roaming outdoors, users can usually count on a clear GPS signal for accurate location, but indoors, GPS often fades, and so up until recently, mobiles have had to rely mainly on rather coarse-grained signal strength readings. What has changed this status quo is the recent trend of dramatically increasing numbers of antennas at the indoor access point, mainly to bolster capacity and coverage with multiple-input, multiple-output (MIMO) techniques. We thus observe an opportunity to revisit the important problem of localization with a fresh perspective. This paper presents the design and experimental evaluation of ArrayTrack, an indoor location system that uses MIMO-based techniques to track wireless clients at a very fine granularity in real time, as they roam about a building. With a combination of FPGA and general purpose computing, we have built a prototype of the ArrayTrack system. Our results show that the techniques we propose can pinpoint 41 clients spread out over an indoor office environment to within 23 centimeters median accuracy, with the system incurring just 100 milliseconds latency, making for the first time ubiquitous real-time, fine-grained location available on the mobile handset.

ArrayTrack: a fine-grained indoor location system

Abstract: With myriad augmented reality, social networking, and retail shopping applications all on the horizon for the mobile handheld, a fast and accurate location technology will become key to a rich user experience. When roaming outdoors, users can usually count on a clear GPS signal for accurate location, but indoors, GPS often fades, and so up until recently, mobiles have had to rely mainly on rather coarse-grained signal strength readings. What has changed this status quo is the recent trend of dramatically increasing numbers of antennas at the indoor access point, mainly to bolster capacity and coverage with multiple-input, multiple-output (MIMO) techniques. We thus observe an opportunity to revisit the important problem of localization with a fresh perspective. This paper presents the design and experimental evaluation of ArrayTrack, an indoor location system that uses MIMO-based techniques to track wireless clients at a very fine granularity in real time, as they roam about a building. With a combination of FPGA and general purpose computing, we have built a prototype of the ArrayTrack system. Our results show that the techniques we propose can pinpoint 41 clients spread out over an indoor office environment to within 23 centimeters median accuracy, with the system incurring just 100 milliseconds latency, making for the first time ubiquitous real-time, fine-grained location available on the mobile handset.

Wireless sensor network survey

Abstract: A wireless sensor network (WSN) has important applications such as remote environmental monitoring and target tracking. This has been enabled by the availability, particularly in recent years, of sensors that are smaller, cheaper, and intelligent. These sensors are equipped with wireless interfaces with which they can communicate with one another to form a network. The design of a WSN depends significantly on the application, and it must consider factors such as the environment, the application's design objectives, cost, hardware, and system constraints. The goal of our survey is to present a comprehensive review of the recent literature since the publication of [I.F. Akyildiz, W. Su, Y. Sankarasubramaniam, E. Cayirci, A survey on sensor networks, IEEE Communications Magazine, 2002]. Following a top-down approach, we give an overview of several new applications and then review the literature on various aspects of WSNs. We classify the problems into three different categories: (1) internal platform and underlying operating system, (2) communication protocol stack, and (3) network services, provisioning, and deployment. We review the major development in these three categories and outline new challenges.

HEED: a hybrid, energy-efficient, distributed clustering approach for ad hoc sensor networks

Abstract: Topology control in a sensor network balances load on sensor nodes and increases network scalability and lifetime. Clustering sensor nodes is an effective topology control approach. We propose a novel distributed clustering approach for long-lived ad hoc sensor networks. Our proposed approach does not make any assumptions about the presence of infrastructure or about node capabilities, other than the availability of multiple power levels in sensor nodes. We present a protocol, HEED (Hybrid Energy-Efficient Distributed clustering), that periodically selects cluster heads according to a hybrid of the node residual energy and a secondary parameter, such as node proximity to its neighbors or node degree. HEED terminates in O(1) iterations, incurs low message overhead, and achieves fairly uniform cluster head distribution across the network. We prove that, with appropriate bounds on node density and intracluster and intercluster transmission ranges, HEED can asymptotically almost surely guarantee connectivity of clustered networks. Simulation results demonstrate that our proposed approach is effective in prolonging the network lifetime and supporting scalable data aggregation.

Routing techniques in wireless sensor networks: a survey

Abstract: Wireless sensor networks consist of small nodes with sensing, computation, and wireless communications capabilities. Many routing, power management, and data dissemination protocols have been specifically designed for WSNs where energy awareness is an essential design issue. Routing protocols in WSNs might differ depending on the application and network architecture. In this article we present a survey of state-of-the-art routing techniques in WSNs. We first outline the design challenges for routing protocols in WSNs followed by a comprehensive survey of routing techniques. Overall, the routing techniques are classified into three categories based on the underlying network structure: flit, hierarchical, and location-based routing. Furthermore, these protocols can be classified into multipath-based, query-based, negotiation-based, QoS-based, and coherent-based depending on the protocol operation. We study the design trade-offs between energy and communication overhead savings in every routing paradigm. We also highlight the advantages and performance issues of each routing technique. The article concludes with possible future research areas.

Wireless sensor networks for habitat monitoring

Abstract: We provide an in-depth study of applying wireless sensor networks to real-world habitat monitoring. A set of system design requirements are developed that cover the hardware design of the nodes, the design of the sensor network, and the capabilities for remote data access and management. A system architecture is proposed to address these requirements for habitat monitoring in general, and an instance of the architecture for monitoring seabird nesting environment and behavior is presented. The currently deployed network consists of 32 nodes on a small island off the coast of Maine streaming useful live data onto the web. The application-driven design exercise serves to identify important areas of further work in data sampling, communications, network retasking, and health monitoring.

Secure routing in wireless sensor networks: attacks and countermeasures

Abstract: We consider routing security in wireless sensor networks. Many sensor network routing protocols have been proposed, but none of them have been designed with security as a goal. We propose security goals for routing in sensor networks, show how attacks against ad-hoc and peer-to-peer networks can be adapted into powerful attacks against sensor networks, introduce two classes of novel attacks against sensor networks sinkholes and HELLO floods, and analyze the security of all the major sensor network routing protocols. We describe crippling attacks against all of them and suggest countermeasures and design considerations. This is the first such analysis of secure routing in sensor networks.