Kyoung-Ha Kim

Bio: Kyoung-Ha Kim is an academic researcher from Harvard University. The author has contributed to research in topics: Nanotube & Nanowire. The author has an hindex of 4, co-authored 4 publications receiving 4034 citations.

Logic gates and computation from assembled nanowire building blocks.

Abstract: Miniaturization in electronics through improvements in established “top-down” fabrication techniques is approaching the point where fundamental issues are expected to limit the dramatic increases in computing seen over the past several decades Here we report a “bottom-up” approach in which functional device elements and element arrays have been assembled from solution through the use of electronically well-defined semiconductor nanowire building blocks We show that crossed nanowire p-n junctions and junction arrays can be assembled in over 95% yield with controllable electrical characteristics, and in addition, that these junctions can be used to create integrated nanoscale field-effect transistor arrays with nanowires as both the conducting channel and gate electrode Nanowire junction arrays have been configured as key OR, AND, and NOR logic-gate structures with substantial gain and have been used to implement basic computation

Carbon nanotube-based nonvolatile random access memory for molecular computing

Abstract: A concept for molecular electronics exploiting carbon nanotubes as both molecular device elements and molecular wires for reading and writing information was developed. Each device element is based on a suspended, crossed nanotube geometry that leads to bistable, electrostatically switchable ON/OFF states. The device elements are naturally addressable in large arrays by the carbon nanotube molecular wires making up the devices. These reversible, bistable device elements could be used to construct nonvolatile random access memory and logic function tables at an integration level approaching 10 12 elements per square centimeter and an element operation frequency in excess of 100 gigahertz. The viability of this concept is demonstrated by detailed calculations and by the experimental realization of a reversible, bistable nanotube-based bit.

Growth and fabrication with single-walled carbon nanotube probe microscopy tips

Abstract: Single-walled carbon nanotube (SWNT) probe microscopy tips were grown by a surface growth chemical vapor deposition method. Tips consisting of individual SWNTs (1.5–4 nm in diameter) and SWNT bundles (4–12 nm in diameter) have been prepared by design through variations in the catalyst and growth conditions. In addition to high-resolution imaging, these tips have been used to fabricate SWNT nanostructures by spatially controlled deposition of specific length segments of the nanotube tips.

Oxide-encapsulated vertical germanium nanowire structures and their DC transport properties

Abstract: We demonstrate the p-type doping of Ge nanowires (NWs) and p?n junction arrays in a scalable vertically aligned structure with all processing performed below 400??C. These structures are advantageous for the large scale production of parallel arrays of devices for nanoelectronics and sensing applications. Efficient methods for the oxide encapsulation, chemical mechanical polishing and cleaning of vertical Ge NWs embedded in silicon dioxide are reported. Approaches for avoiding the selective oxidation and dissolution of Ge NWs in aqueous solutions during chemical mechanical polishing and cleaning of oxide-encapsulated Ge NWs are emphasized. NWs were doped through the epitaxial deposition of a B-doped shell and transport measurements indicate doping concentrations on the order of 1019?cm?3.

Carbon Nanotubes--the Route Toward Applications

Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.

Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays

Abstract: We have converted nanoscale mechanical energy into electrical energy by means of piezoelectric zinc oxide nanowire (NW) arrays. The aligned NWs are deflected with a conductive atomic force microscope tip in contact mode. The coupling of piezoelectric and semiconducting properties in zinc oxide creates a strain field and charge separation across the NW as a result of its bending. The rectifying characteristic of the Schottky barrier formed between the metal tip and the NW leads to electrical current generation. The efficiency of the NW-based piezoelectric power generator is estimated to be 17 to 30%. This approach has the potential of converting mechanical, vibrational, and/or hydraulic energy into electricity for powering nanodevices.

Carbon Nanotubes: Present and Future Commercial Applications

Abstract: Worldwide commercial interest in carbon nanotubes (CNTs) is reflected in a production capacity that presently exceeds several thousand tons per year. Currently, bulk CNT powders are incorporated in diverse commercial products ranging from rechargeable batteries, automotive parts, and sporting goods to boat hulls and water filters. Advances in CNT synthesis, purification, and chemical modification are enabling integration of CNTs in thin-film electronics and large-area coatings. Although not yet providing compelling mechanical strength or electrical or thermal conductivities for many applications, CNT yarns and sheets already have promising performance for applications including supercapacitors, actuators, and lightweight electromagnetic shields.

Coaxial silicon nanowires as solar cells and nanoelectronic power sources

Abstract: Solar cells are attractive candidates for clean and renewable power; with miniaturization, they might also serve as integrated power sources for nanoelectronic systems. The use of nanostructures or nanostructured materials represents a general approach to reduce both cost and size and to improve efficiency in photovoltaics. Nanoparticles, nanorods and nanowires have been used to improve charge collection efficiency in polymer-blend and dye-sensitized solar cells, to demonstrate carrier multiplication, and to enable low-temperature processing of photovoltaic devices. Moreover, recent theoretical studies have indicated that coaxial nanowire structures could improve carrier collection and overall efficiency with respect to single-crystal bulk semiconductors of the same materials. However, solar cells based on hybrid nanoarchitectures suffer from relatively low efficiencies and poor stabilities. In addition, previous studies have not yet addressed their use as photovoltaic power elements in nanoelectronics. Here we report the realization of p-type/intrinsic/n-type (p-i-n) coaxial silicon nanowire solar cells. Under one solar equivalent (1-sun) illumination, the p-i-n silicon nanowire elements yield a maximum power output of up to 200 pW per nanowire device and an apparent energy conversion efficiency of up to 3.4 per cent, with stable and improved efficiencies achievable at high-flux illuminations. Furthermore, we show that individual and interconnected silicon nanowire photovoltaic elements can serve as robust power sources to drive functional nanoelectronic sensors and logic gates. These coaxial silicon nanowire photovoltaic elements provide a new nanoscale test bed for studies of photoinduced energy/charge transport and artificial photosynthesis, and might find general usage as elements for powering ultralow-power electronics and diverse nanosystems.