Kyoung-Sik Moon

Bio: Kyoung-Sik Moon is an academic researcher from Georgia Institute of Technology. The author has contributed to research in topics: Epoxy & Dielectric. The author has an hindex of 49, co-authored 284 publications receiving 9080 citations. Previous affiliations of Kyoung-Sik Moon include Samsung & Korea University.

Electronics Without Lead

Abstract: In conventional consumer electronics such as cell phones, lead-containing interconnects provide the conductive path between different circuit elements. Environmental concerns have led to a search for lead-free alternatives. In their Perspective, Li et al. review these efforts, which have focused on lead-free alloys and electrically conductive adhesives. Both of these approaches are showing promise, but no one lead-free interconnect material can serve as a substitute for the conventional tin-lead solder in all devices.

Thermal Behavior of Silver Nanoparticles for Low-Temperature Interconnect Applications

Abstract: Low-temperature sintering behavior of Ag nanoparticles was investigated The nano Ag particles used (∼20 nm) exhibited obvious sintering behavior at significantly lower temperatures (∼150°C) than the Tm (960°C) of silver Coalescence of the nano Ag particles was observed by sintering the particles at 150°C, 200°C, and 250°C The thermal profile of the nanoparticles was examined by a differential scanning calorimeter (DSC) and a thermogravimetric analyzer (TGA) Shrinkage of the Ag-nanoparticle compacts during the sintering process was observed by thermomechanical analysis (TMA) Sintering of the nanoparticle pellet led to a significant increase in density and electrical conductivity The size of the sintered particles and the crystallite size of the particles increased with increasing sintering temperature

Magnetic alignment of hexagonal boron nitride platelets in polymer matrix: toward high performance anisotropic polymer composites for electronic encapsulation.

Abstract: We report magnetic alignment of hexagonal boron nitride (hBN) platelets and the outstanding material properties of its polymer composite. The magnetically responsive hBN is produced by surface modification of iron oxide, and their orientations can be controlled by applying an external magnetic field during polymer curing. Owing to the anisotropic properties of hBN, the epoxy composite with aligned hBN platelets shows interesting properties along the alignment direction, including significantly reduced coefficient of thermal expansion, reaching ∼28.7 ppm/°C, and enhanced thermal conductivity, 104% higher than that of unaligned counterpart, both of which are observed at a low filler loading of 20 wt %. Our modeling suggests the filler alignment is the major reason for these intriguing material properties. Finite element analysis reveals promising applications for the magnetically aligned hBN-based composites in modern microelectronic packaging.

Large-scale production of two-dimensional nanosheets

Abstract: Two-dimensional (2D) nanomaterials such as graphene, boron nitride (BN), and molybdenum disulfide (MoS2) have been attracting increasing research interest in the past few years due to their unique material properties. However, the lack of a reliable large-scale production method is an inhibiting issue for their practical applications. Here we report a facile, efficient, and scalable method for the fabrication of monolayer and few-layer BN, MoS2, and graphene using combined low-energy ball milling and sonication. Ball milling generates two forces on layered materials, shear force and compression force, which can cleave layered materials into 2D nanosheets from the top/bottom surfaces, and the edge of layered materials. Subsequent sonication would further break larger crystallites into smaller crystallites. These fabricated 2D nanosheets can be well dispersed in aqueous solutions at high concentrations, 1.2 mg mL−1 for BN, 0.8 mg mL−1 for MoS2, and 0.9 mg mL−1 for graphene, which are highly advantageous over other methods. These advantages render great potential in the construction of high-performance 2D material-based devices at low cost. For example, a prototype gas sensor is demonstrated in our study using graphene and MoS2, respectively, which can detect several ppm of ammonia gas.

Glass transition and relaxation behavior of epoxy nanocomposites

Abstract: With advances in nanoscience and nanotechnology, there is increasing interest in polymer nanocomposites, both in scientific research and for engineering applications. Because of the small size of nanoparticles, the polymer–filler interface property becomes a dominant factor in determining the macroscopic material properties of the nanocomposites. The glass-transition behaviors of several epoxy nanocomposites have been investigated with modulated differential scanning calorimetry. The effect of the filler size, filler loading, and dispersion conditions of the nanofillers on the glass-transition temperature (Tg) have been studied. In comparison with their counterparts with micrometer-sized fillers, the nanocomposites show a Tg depression. For the determination of the reason for the Tg depression, the thermomechanical and dielectric relaxation processes of the silica nanocomposites have been investigated with dynamic mechanical analysis and dielectric analysis. The Tg depression is related to the enhanced polymer dynamics due to the extra free volume at the resin–filler interface. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3849–3858, 2004

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Liquid Exfoliation of Layered Materials

Abstract: Background Since at least 400 C.E., when the Mayans first used layered clays to make dyes, people have been harnessing the properties of layered materials. This gradually developed into scientific research, leading to the elucidation of the laminar structure of layered materials, detailed understanding of their properties, and eventually experiments to exfoliate or delaminate them into individual, atomically thin nanosheets. This culminated in the discovery of graphene, resulting in a new explosion of interest in two-dimensional materials. Layered materials consist of two-dimensional platelets weakly stacked to form three-dimensional structures. The archetypal example is graphite, which consists of stacked graphene monolayers. However, there are many others: from MoS 2 and layered clays to more exotic examples such as MoO 3 , GaTe, and Bi 2 Se 3 . These materials display a wide range of electronic, optical, mechanical, and electrochemical properties. Over the past decade, a number of methods have been developed to exfoliate layered materials in order to produce monolayer nanosheets. Such exfoliation creates extremely high-aspect-ratio nanosheets with enormous surface area, which are ideal for applications that require surface activity. More importantly, however, the two-dimensional confinement of electrons upon exfoliation leads to unprecedented optical and electrical properties. Liquid exfoliation of layered crystals allows the production of suspensions of two-dimensional nanosheets, which can be formed into a range of structures. (A) MoS 2 powder. (B) WS 2 dispersed in surfactant solution. (C) An exfoliated MoS 2 nanosheet. (D) A hybrid material consisting of WS 2 nanosheets embedded in a network of carbon nanotubes. Advances An important advance has been the discovery that layered crystals can be exfoliated in liquids. There are a number of methods to do this that involve oxidation, ion intercalation/exchange, or surface passivation by solvents. However, all result in liquid dispersions containing large quantities of nanosheets. This brings considerable advantages: Liquid exfoliation allows the formation of thin films and composites, is potentially scaleable, and may facilitate processing by using standard technologies such as reel-to-reel manufacturing. Although much work has focused on liquid exfoliation of graphene, such processes have also been demonstrated for a host of other materials, including MoS 2 and related structures, layered oxides, and clays. The resultant liquid dispersions have been formed into films, hybrids, and composites for a range of applications. Outlook There is little doubt that the main advances are in the future. Multifunctional composites based on metal and polymer matrices will be developed that will result in enhanced mechanical, electrical, and barrier properties. Applications in energy generation and storage will abound, with layered materials appearing as electrodes or active elements in devices such as displays, solar cells, and batteries. Particularly important will be the use of MoS 2 for water splitting and metal oxides as hydrogen evolution catalysts. In addition, two-dimensional materials will find important roles in printed electronics as dielectrics, optoelectronic devices, and transistors. To achieve this, much needs to be done. Production rates need to be increased dramatically, the degree of exfoliation improved, and methods to control nanosheet properties developed. The range of layered materials that can be exfoliated must be expanded, even as methods for chemical modification must be developed. Success in these areas will lead to a family of materials that will dominate nanomaterials science in the 21st century.

Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors

Abstract: Energy-storage technologies, including electrical double-layer capacitors and rechargeable batteries, have attracted significant attention for applications in portable electronic devices, electric vehicles, bulk electricity storage at power stations, and “load leveling” of renewable sources, such as solar energy and wind power. Transforming lithium batteries and electric double-layer capacitors requires a step change in the science underpinning these devices, including the discovery of new materials, new electrochemistry, and an increased understanding of the processes on which the devices depend. The Review will consider some of the current scientific issues underpinning lithium batteries and electric double-layer capacitors.

3D printing of polymer matrix composites: A review and prospective

Abstract: The use of 3D printing for rapid tooling and manufacturing has promised to produce components with complex geometries according to computer designs. Due to the intrinsically limited mechanical properties and functionalities of printed pure polymer parts, there is a critical need to develop printable polymer composites with high performance. 3D printing offers many advantages in the fabrication of composites, including high precision, cost effective and customized geometry. This article gives an overview on 3D printing techniques of polymer composite materials and the properties and performance of 3D printed composite parts as well as their potential applications in the fields of biomedical, electronics and aerospace engineering. Common 3D printing techniques such as fused deposition modeling, selective laser sintering, inkjet 3D printing, stereolithography, and 3D plotting are introduced. The formation methodology and the performance of particle-, fiber- and nanomaterial-reinforced polymer composites are emphasized. Finally, important limitations are identified to motivate the future research of 3D printing.