Author
L. Jin
Bio: L. Jin is an academic researcher from University of North Carolina at Chapel Hill. The author has contributed to research in topics: Mechanical properties of carbon nanotubes & Carbon nanotube. The author has an hindex of 3, co-authored 3 publications receiving 1220 citations.
Papers
More filters
TL;DR: In this paper, a method to fabricate polymer-based composites with aligned carbon nanotubes is described, and a procedure to determine the nanotube orientation and the degree of alignment is presented.
Abstract: We report a method to fabricate polymer-based composites with aligned carbon nanotubes, and a procedure to determine the nanotube orientation and the degree of alignment. The composites were fabricated by casting a suspension of carbon nanotubes in a solution of a thermoplastic polymer and chloroform. They were uniaxially stretched at 100 °C and were found to remain elongated after removal of the load at room temperature. The orientation and the degree of alignment were determined by x-ray diffraction. The dispersion and the alignment of the nanotubes were also studied by transmission electron microscopy.
684 citations
TL;DR: In this paper, the onset buckling strain and fracture strain were estimated to be ≈5% and ⩾18%, respectively, in uniaxially oriented multi-walled carbon nanotubes embedded in polymer matrices.
Abstract: Composites of uniaxially oriented multiwalled carbon nanotubes embedded in polymer matrices were fabricated and investigated by transmission electron microscopy. In strained composite films, buckling was ubiquitously observed in bent nanotubes with large curvatures. By analyses of a large number of bent nanotubes, the onset buckling strain and fracture strain were estimated to be ≈5% and ⩾18%, respectively. The buckling wavelengths are proportional to the dimensions of the nanotubes. Examination of the fracture surface showed adherence of the polymer to the nanotubes.
517 citations
TL;DR: In this article, the magnetic susceptibility of partially aligned multi-walled carbon nanotubes has been studied using superconducting quantum interference device magnetometry using x-ray diffraction.
Abstract: Magnetic susceptibility of partially aligned multiwalled carbon nanotubes has been studied using superconducting quantum interference device magnetometry. Partial alignment of multiwalled nanotubes was produced by uniaxially straining composites of carbon nanotubes embedded in polymer matrices. The degree of alignment was determined by x-ray diffraction. The observed magnetic response is diamagnetic and anisotropic with the component along the nanotubes less diamagnetic than that of the perpendicular. The observed anisotropy is consistent with theoretical predictions, but it contradicts earlier experimental findings.
46 citations
Cited by
More filters
TL;DR: A review of recent advances in carbon nanotubes and their composites can be found in this article, where the authors examine the research work reported in the literature on the structure and processing of carbon Nanotubes.
4,709 citations
TL;DR: Department of Materials Science, University of Patras, Greece, Theoretical and Physical Chemistry Institute, National Hellenic Research Foundation, and Dipartimento di Scienze Farmaceutiche, Universita di Trieste, Piazzale Europa 1, 34127 Triesteadays.
Abstract: Department of Materials Science, University of Patras, 26504 Rio Patras, Greece, Theoretical and Physical Chemistry Institute, National Hellenic Research Foundation, 48 Vass. Constantinou Avenue, 116 35 Athens, Greece, Institut de Biologie Moleculaire et Cellulaire, UPR9021 CNRS, Immunologie et Chimie Therapeutiques, 67084 Strasbourg, France, and Dipartimento di Scienze Farmaceutiche, Universita di Trieste, Piazzale Europa 1, 34127 Trieste, Italy
3,886 citations
TL;DR: In this article, a review of the progress to date in the field of mechanical reinforcement of polymers using nanotubes is presented, and the most promising processing methods for mechanical reinforcement are discussed.
3,770 citations
TL;DR: In this paper, a review of the current understanding of carbon nanotubes and CNT/polymer nanocomposites with two particular topics: (i) the principles and techniques for CNT dispersion and functionalization and (ii) the effects of CNT-based functionalization on the properties of polymers.
Abstract: Carbon nanotubes (CNTs) hold the promise of delivering exceptional mechanical properties and multi-functional characteristics. Ever-increasing interest in applying CNTs in many different fields has led to continued efforts to develop dispersion and functionalization techniques. To employ CNTs as effective reinforcement in polymer nanocomposites, proper dispersion and appropriate interfacial adhesion between the CNTs and polymer matrix have to be guaranteed. This paper reviews the current understanding of CNTs and CNT/polymer nanocomposites with two particular topics: (i) the principles and techniques for CNT dispersion and functionalization and (ii) the effects of CNT dispersion and functionalization on the properties of CNT/polymer nanocomposites. The fabrication techniques and potential applications of CNT/polymer nanocomposites are also highlighted.
2,849 citations
TL;DR: In this paper, an extended account of the various chemical strategies for grafting polymers onto carbon nanotubes and the manufacturing of carbon-nanotube/polymer nanocomposites is given.
2,766 citations