scispace - formally typeset
Search or ask a question
Author

L. John Kennedy

Bio: L. John Kennedy is an academic researcher from VIT University. The author has contributed to research in topics: Diffuse reflectance infrared fourier transform & Crystallite. The author has an hindex of 48, co-authored 168 publications receiving 6401 citations. Previous affiliations of L. John Kennedy include Central Leather Research Institute.


Papers
More filters
Journal ArticleDOI
TL;DR: MTT assay measurements on cell viability and morphological studies proved that the synthesized nickel oxide nanoparticles posses cytotoxic activity against human cancer cells and the various zones of inhibition, and revealed the effective antibacterial activity of NiO nanoparticles against various Gram positive and Gram negative bacterial pathogens.
Abstract: Green protocols for the synthesis of nickel oxide nanoparticles using Moringa oleifera plant extract has been reported in the present study as they are cost effective and ecofriendly, moreover this paper records that the nickel oxide (NiO) nanoparticles prepared from green method shows better cytotoxicity and antibacterial activity. The NiO nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), High resolution transmission electron microscopy (HRTEM), Energy dispersive X-ray analysis (EDX), and Photoluminescence spectroscopy (PL). The formation of a pure nickel oxide phase was confirmed by XRD and FTIR. The synthesized NiO nanoparticles was single crystalline having face centered cubic phase and has two intense photoluminescence emissions at 305.46nm and 410nm. The formation of nano- and micro-structures was confirmed by HRTEM. The in-vitro cytotoxicity and cell viability of human cancer cell HT-29 (Colon Carcinoma cell lines) and antibacterial studies against various bacterial strains were studied with various concentrations of nickel oxide nanoparticles prepared from Moringa oleifera plant extract. MTT assay measurements on cell viability and morphological studies proved that the synthesized NiO nanoparticles posses cytotoxic activity against human cancer cells and the various zones of inhibition (mm), obtained revealed the effective antibacterial activity of NiO nanoparticles against various Gram positive and Gram negative bacterial pathogens.

324 citations

Journal ArticleDOI
TL;DR: The green synthesis of NiO nanoparticles using Aegle marmelos as a fuel is reported and it is found that the cell viability of A549 cells was effectively reduced and it showed better antibacterial activity towards gram positive bacterial strains.
Abstract: In the present study, we report the green synthesis of NiO nanoparticles using Aegle marmelos as a fuel and this method is ecofriendly and cost effective. The plant Aegle marmelos is used in the field of pharmaceuticals to cure diseases like chronic diarrhea, peptic ulcers and dysentery in India for nearly 5 centuries. The as-prepared nanoparticles were confirmed as pure face centered cubic phase and single crystalline in nature by XRD. The formation of agglomerated spherical nanoparticles was shown by HR-SEM and HR-TEM images. The particle size calculated from HR-SEM was in the range 8-10 nm and it matches with the average crystallite size calculated from the XRD pattern. NiO shows intense emission peaks at 363 and 412 nm in its PL spectra. The band gap of 3.5 eV is observed from DRS studies and the formation of pure NiO is confirmed by FT-IR spectra. The as-prepared NiO nanoparticles show super paramagnetic behavior, when magnetization studies are carried out. It is then evaluated for cytotoxic activity towards A549 cell culture, antibacterial activity and photocatalytic degradation (PCD) of 4‑chlorophenol (4‑CP), which is known as the endocrine disrupting chemical (EDC). From the results, it is found that the cell viability of A549 cells was effectively reduced and it showed better antibacterial activity towards gram positive bacterial strains. It is also proved to be an efficient and stable photocatalyst towards the degradation of 4‑CP.

248 citations

Journal ArticleDOI
TL;DR: In this paper, powder X-ray diffraction (XRD), high resolution scanning electron microscopy (HR-SEM), energy dispersive Xray analysis, UV-Visible diffuse reflectance spectra (DRS), photoluminescence (PL) spectra and vibrating sample magnetometer (VSM).

227 citations

Journal ArticleDOI
TL;DR: In this article, the adsorption behavior of phenol onto the porous carbon was studied by varying the parameters such as agitation time, phenol concentration, pH and temperature, and the results showed that the sorption process was found to be exothermic in nature.

206 citations

Journal ArticleDOI
TL;DR: In this paper, the magnetic properties of the synthesized spinel ferrites were investigated using room temperature vibrating sample magnetometer (VSM) and their hysteresis loops were obtained.

193 citations


Cited by
More filters
01 Nov 2000
TL;DR: In this paper, the authors compared the power density characteristics of ultracapacitors and batteries with respect to the same charge/discharge efficiency, and showed that the battery can achieve energy densities of 10 Wh/kg or higher with a power density of 1.2 kW/kg.
Abstract: The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.

2,437 citations

Journal ArticleDOI
01 Oct 1971-Nature
TL;DR: Lipson and Steeple as mentioned in this paper interpreted X-ray powder diffraction patterns and found that powder-diffraction patterns can be represented by a set of 3-dimensional planes.
Abstract: Interpretation of X-ray Powder Diffraction Patterns . By H. Lipson and H. Steeple. Pp. viii + 335 + 3 plates. (Mac-millan: London; St Martins Press: New York, May 1970.) £4.

1,867 citations

Journal ArticleDOI
TL;DR: This paper presents a critical review of recent achievements in the modification of ZnO photocatalyst for organic contaminants degradation and recommends improvements in the heterogeneous photocatalysis under UV/visible/solar illumination.

1,646 citations

Journal ArticleDOI
TL;DR: In this paper, the photo-degradation mechanisms of persistent organic pollutants (POPs) and the recent progress in ZnO nanostructured fabrication methods including doping, heterojunction and modification techniques as well as improvements of ZnOs as a photocatalyst are reviewed.
Abstract: Persistent organic pollutants (POPs) are carbon-based chemical substances that are resistant to environmental degradation and may not be completely removed through treatment processes. Their persistence can contribute to adverse health impacts on wild-life and human beings. Thus, the solar photocatalysis process has received increasing attention due to its great potential as a green and eco-friendly process for the elimination of POPs to increase the security of clean water. In this context, ZnO nanostructures have been shown to be prominent photocatalyst candidates to be used in photodegradation owing to the facts that they are low-cost, non-toxic and more efficient in the absorption across a large fraction of the solar spectrum compared to TiO 2 . There are several aspects, however, need to be taken into consideration for further development. The purpose of this paper is to review the photo-degradation mechanisms of POPs and the recent progress in ZnO nanostructured fabrication methods including doping, heterojunction and modification techniques as well as improvements of ZnO as a photocatalyst. The second objective of this review is to evaluate the immobilization of photocatalyst and suspension systems while looking into their future challenges and prospects.

1,551 citations

Journal ArticleDOI
TL;DR: Recent progress in the applications of hierarchically structured porous materials from energy conversion and storage, catalysis, photocatalysis, adsorption, separation, and sensing to biomedicine is reviewed and could stimulate researchers to synthesize new advanced hierarchically porous solids.
Abstract: Over the last decade, significant effort has been devoted to the applications of hierarchically structured porous materials owing to their outstanding properties such as high surface area, excellent accessibility to active sites, and enhanced mass transport and diffusion. The hierarchy of porosity, structural, morphological and component levels in these materials is key for their high performance in all kinds of applications. The introduction of hierarchical porosity into materials has led to a significant improvement in the performance of materials. Herein, recent progress in the applications of hierarchically structured porous materials from energy conversion and storage, catalysis, photocatalysis, adsorption, separation, and sensing to biomedicine is reviewed. Their potential future applications are also highlighted. We particularly dwell on the relationship between hierarchically porous structures and properties, with examples of each type of hierarchically structured porous material according to its chemical composition and physical characteristics. The present review aims to open up a new avenue to guide the readers to quickly obtain in-depth knowledge of applications of hierarchically porous materials and to have a good idea about selecting and designing suitable hierarchically porous materials for a specific application. In addition to focusing on the applications of hierarchically porous materials, this comprehensive review could stimulate researchers to synthesize new advanced hierarchically porous solids.

1,052 citations