Lan Sun

Bio: Lan Sun is an academic researcher from Xiamen University. The author has contributed to research in topics: Photocatalysis & Nanotube. The author has an hindex of 29, co-authored 63 publications receiving 4024 citations. Previous affiliations of Lan Sun include Dalian University of Technology & National Institute of Standards and Technology.

p-n Heterojunction photoelectrodes composed of Cu2O-loaded TiO2 nanotube arrays with enhanced photoelectrochemical and photoelectrocatalytic activities

Abstract: Cu2O/TiO2 p–n heterojunction photoelectrodes were prepared by depositing different amounts of p-type Cu2O nanoparticles on n-type TiO2 nanotube arrays (i.e., forming Cu2O/TiO2 composite nanotubes) via an ultrasonication-assisted sequential chemical bath deposition. The success of deposition of Cu2O nanoparticles was corroborated by structural and composition characterizations. The enhanced absorption in the visible light region was observed in Cu2O/TiO2 composite nanotubes. The largely improved separation of photogenerated electrons and holes was revealed by photocurrent measurements. Consequently, Cu2O/TiO2 heterojunction photoelectrodes exhibited a more effective photoconversion capability than TiO2 nanotubes alone in photoelectrochemical measurements. Furthermore, Cu2O/TiO2 composite photoelectrodes also possessed superior photoelectrocatalytic activity and stability in the degradation of Rhodamine B. Intriguingly, by selecting an appropriate bias potential, a synergistic effect between electricity and visible light irradiation can be achieved.

Inorganic-modified semiconductor TiO2 nanotube arrays for photocatalysis

Abstract: Semiconductor photocatalysis is a promising physicochemical process for the photodegradation of organic contaminants and bacterial detoxification. Among various oxide semiconductor photocatalysts, TiO2 has garnered considerable attention because of its outstanding properties including strong oxidizing activity, chemical and mechanical stability, corrosion resistance, and nontoxicity. This Review briefly introduces the key mechanisms of photocatalysis, highlights the recent developments pertaining to pure TiO2 nanotube arrays and TiO2 nanotube arrays modified by non-metals, metals and semiconductors, and their applications in the photocatalytic degradation of organic dyes. The improved photocatalytic efficiencies of modified TiO2 nanotube arrays are compared with unmodified counterparts. Current challenges and prospective areas of interest in this rich field are also presented.

Some critical structure factors of titanium oxide nanotube array in its photocatalytic activity.

Abstract: A highly ordered TiO2 nanotube array on Ti substrate was fabricated by using an electrochemical anodic oxidation method. The morphology, crystalline phase, and photoelectrochemical property of the nanotube array were characterized. The photocatalytic activity of the nanotube array was evaluated by the decolorization of methyl orange in aqueous solution using the different light sources. The effects of structure and morphology of the nanotube array on its photocatalytic activity were investigated. It was found that the photoabsorption behavior of the TiO2 nanotube film depended on the structures of the nanotube array. The nanotube array films exhibited a drastically enhanced photocurrent, and a higher photocatalytic activity compared with the TiO2 nanoparticle film prepared by the regular sol−gel method. The experimental results indicated that the film thickness markedly influenced the photocatalytic activity of nanotube array film, and the 2.5 μm-thick TiO2 nanotube array film appeared a maximum photodegr...

TiO2 nanotubes: synthesis and applications.

Abstract: TiO(2) is one of the most studied compounds in materials science. Owing to some outstanding properties it is used for instance in photocatalysis, dye-sensitized solar cells, and biomedical devices. In 1999, first reports showed the feasibility to grow highly ordered arrays of TiO(2) nanotubes by a simple but optimized electrochemical anodization of a titanium metal sheet. This finding stimulated intense research activities that focused on growth, modification, properties, and applications of these one-dimensional nanostructures. This review attempts to cover all these aspects, including underlying principles and key functional features of TiO(2), in a comprehensive way and also indicates potential future directions of the field.

TiO2 photocatalysis: Design and applications

Abstract: TiO 2 photocatalysis is widely used in a variety of applications and products in the environmental and energy fields, including self-cleaning surfaces, air and water purification systems, sterilization, hydrogen evolution, and photoelectrochemical conversion. The development of new materials, however, is strongly required to provide enhanced performances with respect to the photocatalytic properties and to find new uses for TiO 2 photocatalysis. In this review, recent developments in the area of TiO 2 photocatalysis research, in terms of new materials from a structural design perspective, have been summarized. The dimensionality associated with the structure of a TiO 2 material can affect its properties and functions, including its photocatalytic performance, and also more specifically its surface area, adsorption, reflectance, adhesion, and carrier transportation properties. We provide a brief introduction to the current situation in TiO 2 photocatalysis, and describe structurally controlled TiO 2 photocatalysts which can be classified into zero-, one-, two-, and three-dimensional structures. Furthermore, novel applications of TiO 2 surfaces for the fabrication of wettability patterns and for printing are discussed.

Visible-light driven heterojunction photocatalysts for water splitting – a critical review

Abstract: Solar driven catalysis on semiconductors to produce clean chemical fuels, such as hydrogen, is widely considered as a promising route to mitigate environmental issues caused by the combustion of fossil fuels and to meet increasing worldwide demands for energy. The major limiting factors affecting the efficiency of solar fuel synthesis include; (i) light absorption, (ii) charge separation and transport and (iii) surface chemical reaction; therefore substantial efforts have been put into solving these problems. In particular, the loading of co-catalysts or secondary semiconductors that can act as either electron or hole acceptors for improved charge separation is a promising strategy, leading to the adaptation of a junction architecture. Research related to semiconductor junction photocatalysts has developed very rapidly and there are a few comprehensive reviews in which the strategy is discussed (A. Kudo and Y. Miseki, Chemical Society Reviews, 2009, 38, 253–278, K. Li, D. Martin, and J. Tang, Chinese Journal of Catalysis, 2011, 32, 879–890, R. Marschall, Advanced Functional Materials, 2014, 24, 2421–2440). This critical review seeks to give an overview of the concept of heterojunction construction and more importantly, the current state-of-the art for the efficient, visible-light driven junction water splitting photo(electro)catalysts reported over the past ten years. For water splitting, these include BiVO4, Fe2O3, Cu2O and C3N4, which have attracted increasing attention. Experimental observations of the proposed charge transfer mechanism across the semiconductor/semiconductor/metal junctions and the resultant activity enhancement are discussed. In parallel, recent successes in the theoretical modelling of semiconductor electronic structures at interfaces and how these explain the functionality of the junction structures is highlighted.

Electrodeposition of hierarchically structured three-dimensional nickel-iron electrodes for efficient oxygen evolution at high current densities.

Abstract: Development of efficient and affordable oxygen evolution catalysts is essential for large-scale electrolytic water splitting. Here, the authors report mesoporous nickel–iron composite nanosheets loaded on macroporous nickel foam substrates, and evaluate their electrocatalytic oxygen evolution in basic media.

TiO2 nanotubes: Self-organized electrochemical formation, properties and applications

Abstract: The present paper gives an overview and review on self-organized TiO2 nanotube layers and other transition metal oxide tubular structures grown by controlled anodic oxidation of a metal substrate We describe mechanistic aspects of the tube growth and discuss the electrochemical conditions that need to be fulfilled in order to synthesize these layers Key properties of these highly ordered, high aspect ratio tubular layers are discussed In the past few years, a wide range of functional applications of the layers have been explored ranging from photocatalysis, solar energy conversion, electrochromic effects over using the material as a template or catalyst support to applications in the biomedical field A comprehensive view on state of the art is provided