Lan Zhou

Bio: Lan Zhou is an academic researcher from California Institute of Technology. The author has contributed to research in topics: Solar fuel & Thin film. The author has an hindex of 19, co-authored 70 publications receiving 1953 citations. Previous affiliations of Lan Zhou include Nanjing University & University of Vermont.

Room-temperature saturated ferroelectric polarization in BiFeO3 ceramics synthesized by rapid liquid phase sintering

Abstract: Single-phased ferroelectromagnet BiFeO3 ceramics with high resistivity were synthesized by a rapid liquid phase sintering technique. Saturated ferroelectric hysteresis loops were observed at room temperature in the ceramics sintered at 880 °C for 450 s. The spontaneous polarization, remnant polarization, and the coercive field are 8.9 μC/cm2, 4.0 μC/cm2, and 39 kV/cm, respectively, under an applied field of 100 kV/cm. It is proposed that the formation of Fe2+ and an oxygen deficiency leading to the higher leakage can be greatly suppressed by the very high heating rate, short sintering period, and liquid phase sintering technique. The latter was also found effective in increasing the density of the ceramics. The sintering technique developed in this work is expected to be useful in synthesizing other ceramics from multivalent or volatile starting materials.

Solar fuels photoanode materials discovery by integrating high-throughput theory and experiment.

Abstract: The limited number of known low-band-gap photoelectrocatalytic materials poses a significant challenge for the generation of chemical fuels from sunlight. Using high-throughput ab initio theory with experiments in an integrated workflow, we find eight ternary vanadate oxide photoanodes in the target band-gap range (1.2–2.8 eV). Detailed analysis of these vanadate compounds reveals the key role of VO4 structural motifs and electronic band-edge character in efficient photoanodes, initiating a genome for such materials and paving the way for a broadly applicable high-throughput-discovery and materials-by-design feedback loop. Considerably expanding the number of known photoelectrocatalysts for water oxidation, our study establishes ternary metal vanadates as a prolific class of photoanode materials for generation of chemical fuels from sunlight and demonstrates our high-throughput theory–experiment pipeline as a prolific approach to materials discovery.

Electrochemical Stability of Metastable Materials

Abstract: We present a first-principles-based formalism to provide a quantitative measure of the thermodynamic instability and propensity for electrochemical stabilization, passivation, or corrosion of metastable materials in aqueous media. We demonstrate that this formalism can assess the relative Gibbs free energy of candidate materials in aqueous media as well as their decomposition products, combining solid and aqueous phases, as a function of pH and potential. On the basis of benchmarking against 20 stable as well as metastable materials reported in the literature and also our experimental characterization of metastable triclinic-FeVO4, we present quantitative estimates for the relative Gibbs free energy and corresponding aqueous regimes where these materials are most likely to be stable, form inert passivating films, or steadily corrode to aqueous species. Furthermore, we show that the structure and composition of the passivating films formed on triclinic-FeVO4 are also in excellent agreement with the Point D...

Rutile Alloys in the Mn-Sb-O System Stabilize Mn3+ to Enable Oxygen Evolution in Strong Acid

Abstract: Electrocatalysis of the oxygen evolution reaction is central to several energy technologies including electrolyzers, solar fuel generators, and air-breathing batteries. Strong acid electrolytes are desirable for many implementations of these technologies, although the deployment of such device designs is often hampered by the lack of non-precious-metal oxygen evolution electrocatalysts, with Ir-based oxides comprising the only known catalysts that exhibit stable activity at low overpotential. During our exploration of the Mn–Sb–O system for precious-metal-free electrocatalysts, we discovered that Mn can be incorporated into the rutile oxide structure at much higher concentrations than previously known, and that these Mn-rich rutile alloys exhibit great catalytic activity with current densities exceeding 50 mA cm–2 at 0.58 V overpotential and catalysis onset at 0.3 V overpotential. While this activity does not surpass that of IrO2, Pourbaix analysis reveals that the Mn–Sb rutile oxide alloys have the same ...

High Throughput Discovery of Solar Fuels Photoanodes in the CuO-V_2O_5 System

Abstract: Solar photoelectrochemical generation of fuel is a promising energy technology yet the lack of an efficient, robust photoanode remains a primary materials challenge in the development and deployment of solar fuels generators. Metal oxides comprise the most promising class of photoanode materials, but no known material meets the demanding requirements of low band gap energy, photoelectrocatalysis of the oxygen evolution reaction (OER), and stability under highly oxidizing conditions. Here, the identification of new photoelectroactive materials is reported through a strategic combination of combinatorial materials synthesis, high-throughput photoelectrochemistry, optical spectroscopy, and detailed electronic structure calculations. Four photoelectrocatalyst phases, α-Cu_2V_2O_7, β-Cu_2V_2O_7,γ-Cu_3V_2O_8, and Cu_(11)V_6O_(26), are reported with band gap energy at or below 2 eV. The photoelectrochemical properties and 30 min stability of these copper vanadate phases are demonstrated in three different aqueous electrolytes (pH 7, pH 9, and pH 13), with select combinations of phase and electrolyte exhibiting unprecedented photoelectrocatalytic stability for metal oxides with sub-2 eV band gap. Through integration of experimental and theoretical techniques, new structure-property relationships are determined and establish CuO–V_2O_5 as the most prominent composition system for OER photoelectrocatalysts, providing crucial information for materials genomes initiatives and paving the way for continued development of solar fuels photoanodes.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Multiferroics: progress and prospects in thin films.

Abstract: Multiferroic materials, which show simultaneous ferroelectric and magnetic ordering, exhibit unusual physical properties — and in turn promise new device applications — as a result of the coupling between their dual order parameters. We review recent progress in the growth, characterization and understanding of thin-film multiferroics. The availability of high-quality thin-film multiferroics makes it easier to tailor their properties through epitaxial strain, atomic-level engineering of chemistry and interfacial coupling, and is a prerequisite for their incorporation into practical devices. We discuss novel device paradigms based on magnetoelectric coupling, and outline the key scientific challenges in the field.

Multiferroicity: the coupling between magnetic and polarization orders

Abstract: Multiferroics, defined for those multifunctional materials in which two or more kinds of fundamental ferroicities coexist, have become one of the hottest topics of condensed matter physics and materials science in recent years. The coexistence of several order parameters in multiferroics brings out novel physical phenomena and offers possibilities for new device functions. The revival of research activities on multiferroics is evidenced by some novel discoveries and concepts, both experimentally and theoretically. In this review, we outline some of the progressive milestones in this stimulating field, especially for those single-phase multiferroics where magnetism and ferroelectricity coexist. First, we highlight the physical concepts of multiferroicity and the current challenges to integrate the magnetism and ferroelectricity into a single-phase system. Subsequently, we summarize various strategies used to combine the two types of order. Special attention is paid to three novel mechanisms for multiferroicity generation: (1) the ferroelectricity induced by the spin orders such as spiral and E-phase antiferromagnetic spin orders, which break the spatial inversion symmetry; (2) the ferroelectricity originating from the charge-ordered states; and (3) the ferrotoroidic system. Then, we address the elementary excitations such as electromagnons, and the application potentials of multiferroics. Finally, open questions and future research opportunities are proposed.

First-principles study of spontaneous polarization in multiferroic Bi Fe O 3

Abstract: The ground-state structural and electronic properties of ferroelectric $\mathrm{Bi}\mathrm{Fe}{\mathrm{O}}_{3}$ are calculated using density functional theory within the local spin-density approximation (LSDA) and the $\mathrm{LSDA}+U$ method. The crystal structure is computed to be rhombohedral with space group $R3c$, and the electronic structure is found to be insulating and antiferromagnetic, both in excellent agreement with available experiments. A large ferroelectric polarization of $90--100\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{C}∕{\mathrm{cm}}^{2}$ is predicted, consistent with the large atomic displacements in the ferroelectric phase and with recent experimental reports, but differing by an order of magnitude from early experiments. One possible explanation is that the latter may have suffered from large leakage currents. However, both past and contemporary measurements are shown to be consistent with the modern theory of polarization, suggesting that the range of reported polarizations may instead correspond to distinct switching paths in structural space. Modern measurements on well-characterized bulk samples are required to confirm this interpretation.

Inverse molecular design using machine learning: Generative models for matter engineering

Abstract: The discovery of new materials can bring enormous societal and technological progress. In this context, exploring completely the large space of potential materials is computationally intractable. Here, we review methods for achieving inverse design, which aims to discover tailored materials from the starting point of a particular desired functionality. Recent advances from the rapidly growing field of artificial intelligence, mostly from the subfield of machine learning, have resulted in a fertile exchange of ideas, where approaches to inverse molecular design are being proposed and employed at a rapid pace. Among these, deep generative models have been applied to numerous classes of materials: rational design of prospective drugs, synthetic routes to organic compounds, and optimization of photovoltaics and redox flow batteries, as well as a variety of other solid-state materials.