László Forró

Bio: László Forró is an academic researcher from École Polytechnique Fédérale de Lausanne. The author has contributed to research in topics: Carbon nanotube & Electron paramagnetic resonance. The author has an hindex of 72, co-authored 467 publications receiving 24083 citations. Previous affiliations of László Forró include University of Notre Dame & École Polytechnique.

Elastic and shear moduli of single-walled carbon nanotube ropes

Abstract: Reference LNNME-ARTICLE-1999-004doi:10.1103/PhysRevLett.82.944View record in Web of Science Record created on 2007-04-23, modified on 2016-08-08

Mechanical properties of carbon nanotubes

Abstract: A variety of outstanding experimental results on the elucidation of the elastic properties of carbon nanotubes are fast appearing. These are based mainly on the techniques of high-resolution transmission electron microscopy (HRTEM) and atomic force microscopy (AFM) to determine the Young’s moduli of single-wall nanotube bundles and multi-walled nanotubes, prepared by a number of methods. These results are confirming the theoretical predictions that carbon nanotubes have high strength plus extraordinary flexibility and resilience. As well as summarising the most notable achievements of theory and experiment in the last few years, this paper explains the properties of nanotubes in the wider context of materials science and highlights the contribution of our research group in this rapidly expanding field. A deeper understanding of the relationship between the structural order of the nanotubes and their mechanical properties will be necessary for the development of carbon-nanotube-based composites. Our research to date illustrates a qualitative relationship between the Young’s modulus of a nanotube and the amount of disorder in the atomic structure of the walls. Other exciting results indicate that composites will benefit from the exceptional mechanical properties of carbon nanotubes, but that the major outstanding problem of load transfer efficiency must be overcome before suitable engineering materials can be produced.

Cellular Toxicity of Carbon-Based Nanomaterials

Abstract: The cellular toxicity of carbon-based nanomaterials was studied as a function of their aspect ratio and surface chemistry. These structures were multiwalled carbon nanotubes, carbon nanofibers, and carbon nanoparticles. Their toxicity was tested in vitro on lung tumor cells. Our work clearly indicated that these materials are toxic while the hazardous effect is size-dependent. Moreover, cytotoxicity is enhanced when the surface of the particles is functionalized after an acid treatment.

Ising pairing in superconducting NbSe2 atomic layers

Abstract: The superconducting properties of NbSe2 as it approaches the monolayer limit are investigated by means of magnetotransport measurements, uncovering evidence of spin–momentum locking.

Aligned carbon nanotube films: production and optical and electronic properties

Abstract: Carbon nanotube material can now be produced in macroscopic quantities. However, the raw material has a disordered structure, which restricts investigations of both the properties and applications of the nanotubes. A method has been developed to produce thin films of aligned carbon nanotubes. The tubes can be aligned either parallel or perpendicular to the surface, as verified by scanning electron microscopy. The parallel aligned surfaces are birefringent, reflecting differences in the dielectric function along and normal to the tubes. The electrical resistivities are anisotropic as well, being smaller along the tubes than perpendicular to them, because of corresponding differences in the electronic transport properties.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene

Abstract: We measured the elastic properties and intrinsic breaking strength of free-standing monolayer graphene membranes by nanoindentation in an atomic force microscope. The force-displacement behavior is interpreted within a framework of nonlinear elastic stress-strain response, and yields second- and third-order elastic stiffnesses of 340 newtons per meter (N m(-1)) and -690 Nm(-1), respectively. The breaking strength is 42 N m(-1) and represents the intrinsic strength of a defect-free sheet. These quantities correspond to a Young's modulus of E = 1.0 terapascals, third-order elastic stiffness of D = -2.0 terapascals, and intrinsic strength of sigma(int) = 130 gigapascals for bulk graphite. These experiments establish graphene as the strongest material ever measured, and show that atomically perfect nanoscale materials can be mechanically tested to deformations well beyond the linear regime.

Electronics and optoelectronics of two-dimensional transition metal dichalcogenides.

Abstract: Single-layer metal dichalcogenides are two-dimensional semiconductors that present strong potential for electronic and sensing applications complementary to that of graphene.

Superior Thermal Conductivity of Single-Layer Graphene

Abstract: We report the measurement of the thermal conductivity of a suspended single-layer graphene. The room temperature values of the thermal conductivity in the range ∼(4.84 ± 0.44) × 103 to (5.30 ± 0.48) × 103 W/mK were extracted for a single-layer graphene from the dependence of the Raman G peak frequency on the excitation laser power and independently measured G peak temperature coefficient. The extremely high value of the thermal conductivity suggests that graphene can outperform carbon nanotubes in heat conduction. The superb thermal conduction property of graphene is beneficial for the proposed electronic applications and establishes graphene as an excellent material for thermal management.

Carbon Nanotubes--the Route Toward Applications

Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.