scispace - formally typeset
Search or ask a question
Author

LC Lutz-Christian Gerhardt

Other affiliations: ETH Zurich
Bio: LC Lutz-Christian Gerhardt is an academic researcher from University of St. Gallen. The author has contributed to research in topics: Tribology & Human skin. The author has an hindex of 7, co-authored 8 publications receiving 1161 citations. Previous affiliations of LC Lutz-Christian Gerhardt include ETH Zurich.

Papers
More filters
Journal ArticleDOI
TL;DR: In this article, superhydrophobic textile fabrics are prepared by a simple, one-step gas phase coating procedure by which a layer of polymethylsilsesquioxane nanofilaments is grown onto the individual textile fibers.
Abstract: Superhydrophobic textile fabrics are prepared by a simple, one-step gas phase coating procedure by which a layer of polymethylsilsesquioxane nanofilaments is grown onto the individual textile fibers. A total of 11 textile fabrics made from natural and man made fibers are successfully coated and their superhydrophobic properties evaluated by the water shedding angle technique. A thorough investigation of the commercially relevant poly(ethylene terephthalate) fabric reveals an unparalleled long-term water resistance and stability of the superhydrophobic effect. Because of the special surface geometry generated by the nanoscopic, fibrous coating on the microscopic, fibrous textiles, the coated fabric remains completely dry even after two months of full immersion in water and stays superhydrophobic even after continuous rubbing with a skin simulating friction partner under significant load. Furthermore, important textile parameters such as tensile strength, color, and haptics are unaffected by the silicone nanofilament coating. For the first time, an in-depth characterization of the wetting properties, beyond simple contact angle measurements, as well as a thorough evaluation of the most important textile parameters is performed on a superhydrophobic fabric, which reveals a true potential for application.

557 citations

Journal ArticleDOI
TL;DR: Increasing skin hydration seems to cause gender-specific changes in the mechanical properties and/or surface topography of human skin, leading to skin softening and increased real contact area and adhesion.
Abstract: Friction and shear forces, as well as moisture between the human skin and textiles are critical factors in the formation of skin injuries such as blisters, abrasions and decubitus. This study investigated how epidermal hydration affects the friction between skin and textiles. The friction between the inner forearm and a hospital fabric was measured in the natural skin condition and in different hydration states using a force plate. Eleven males and eleven females rubbed their forearm against the textile on the force plate using defined normal loads and friction movements. Skin hydration and viscoelasticity were assessed by corneometry and the suction chamber method, respectively. In each individual, a highly positive linear correlation was found between skin moisture and friction coefficient (COF). No correlation was observed between moisture and elasticity, as well as between elasticity and friction. Skin viscoelasticity was comparable for women and men. The friction of female skin showed significantly higher moisture sensitivity. COFs increased typically by 43% (women) and 26% (men) when skin hydration varied between very dry and normally moist skin. The COFs between skin and completely wet fabric were more than twofold higher than the values for natural skin rubbed on a dry textile surface. Increasing skin hydration seems to cause gender-specific changes in the mechanical properties and/or surface topography of human skin, leading to skin softening and increased real contact area and adhesion.

282 citations

Journal ArticleDOI
TL;DR: In this article, the authors studied the friction behavior of human skin by combining friction measurements using a tri-axial force plate with skin contact area measurements using pressure sensitive film and found that adhesion was involved in all investigated cases of friction between skin and glass.

172 citations

Journal ArticleDOI
TL;DR: This study has investigated in detail the influence of age on the friction of human skin against textiles.
Abstract: Background/purpose: The mechanical properties of human skin are known to change with ageing, rendering skin less resistant to friction and shear forces, as well as more vulnerable to wounds. Until now, only few and contradictory results on the age-dependent friction properties of skin have been reported. This study has investigated in detail the influence of age on the friction of human skin against textiles. Methods: In vivo skin-friction measurements on a force plate were combined with skin analyses concerning elasticity, hydration, pH value and sebum content. Thirty-two young and 28 aged persons rubbed their volar forearm in a reciprocating motion against various textiles on the force plate, using defined normal loads and sliding velocities, representing clinically relevant contact conditions. Results: Mean friction coefficients ranged from 0.30 ± 0.04 (polytetrafluoroethylene) to 0.43 ± 0.04 (cotton/polyester). No significant differences in the friction properties of skin were found between the age groups despite skin elasticity being significantly lower in the aged persons. Skin hydration was significantly higher in the elderly, whereas no significant differences were observed in either skin pH value or sebum content. Conclusion: Adhesion is usually assumed to be the dominant factor in skin friction, but our observations imply that deformation is also an important factor in the friction of aged skin. In the elderly, lower skin elasticity and skin turgor are associated with more pronounced skin tissue displacements and greater shear forces during frictional contact, emphasizing the importance of friction reduction in wound-prevention programmes.

113 citations

Journal ArticleDOI
TL;DR: The contact phenomena at the skin–textile interface and the development of a purpose‐built textile friction analyser (TFA) for the tribological assessment of skin–fabric interactions, in connection with decubitus prevention are described.
Abstract: Background/purpose: Prolonged pressure as well as friction and shear forces at the skin–textile interface are decisive physical parameters in the development of decubitus. The present article describes the contact phenomena at the skin–textile interface and the development of a purpose-built textile friction analyser (TFA) for the tribological assessment of skin–fabric interactions, in connection with decubitus prevention. Methods: Interface pressure distributions were recorded in the pelvic and femoral regions between supine persons and a foam mattress. Fabrics made of various natural and synthetic yarns were investigated using the TFA. A vertical load of 7.7 kPa was applied to the swatches, simulating high interface pressures at the skin–fabric interface and clinical conditions of bedridden persons. Fabrics were rubbed in reciprocating motions against a validated skin-simulating material to determine static as well as dynamic friction coefficients (COFs). Results: Maximum contact pressures ranged from 5.2 to 7.7 kPa (39–58 mmHg) and exceeded the capillary closure pressure (32 mmHg) in all investigated bedding positions. For both COFs, a factor of 2.5 was found between the samples with the lowest and highest values. Our results were in a similar range to COFs found in measurements on human skin in vivo. The results showed that our test method can detect differences of 0.01 in friction coefficients. Conclusion: TFA measurements allow the objective and reliable study of the tribology of the skin–textile biointerface and will be used to develop medical textiles with improved performance and greater efficacy for decubitus prevention.

89 citations


Cited by
More filters
Reference EntryDOI
31 Oct 2001
TL;DR: The American Society for Testing and Materials (ASTM) as mentioned in this paper is an independent organization devoted to the development of standards for testing and materials, and is a member of IEEE 802.11.
Abstract: The American Society for Testing and Materials (ASTM) is an independent organization devoted to the development of standards.

3,792 citations

Journal ArticleDOI
06 Mar 2015-Science
TL;DR: An ethanolic suspension of perfluorosilane-coated titanium dioxide nanoparticles that forms a paint that can be sprayed, dipped, or extruded onto both hard and soft materials to create a self-cleaning surface that functions even upon emersion in oil.
Abstract: Superhydrophobic self-cleaning surfaces are based on the surface micro/nanomorphologies; however, such surfaces are mechanically weak and stop functioning when exposed to oil. We have created an ethanolic suspension of perfluorosilane-coated titanium dioxide nanoparticles that forms a paint that can be sprayed, dipped, or extruded onto both hard and soft materials to create a self-cleaning surface that functions even upon emersion in oil. Commercial adhesives were used to bond the paint to various substrates and promote robustness. These surfaces maintained their water repellency after finger-wipe, knife-scratch, and even 40 abrasion cycles with sandpaper. The formulations developed can be used on clothes, paper, glass, and steel for a myriad of self-cleaning applications.

1,432 citations

Journal ArticleDOI
TL;DR: It is expected that special wettability stimulated oil/water separation materials can achieve industrial scale production and be put into use for oil spills and industrial oily wastewater treatment in the near future.
Abstract: Oil spills and industrial organic pollutants have induced severe water pollution and threatened every species in the ecological system. To deal with oily water, special wettability stimulated materials have been developed over the past decade to separate oil-and-water mixtures. Basically, synergy between the surface chemical composition and surface topography are commonly known as the key factors to realize the opposite wettability to oils and water and dominate the selective wetting or absorption of oils/water. In this review, we mainly focus on the development of materials with either super-lyophobicity or super-lyophilicity properties in oil/water separation applications where they can be classified into four kinds as follows (in terms of the surface wettability of water and oils): (i) superhydrophobic and superoleophilic materials, (ii) superhydrophilic and under water superoleophobic materials, (iii) superhydrophilic and superoleophobic materials, and (iv) smart oil/water separation materials with switchable wettability. These materials have already been applied to the separation of oil-and-water mixtures: from simple oil/water layered mixtures to oil/water emulsions (including oil-in-water emulsions and water-in-oil emulsions), and from non-intelligent materials to intelligent materials. Moreover, they also exhibit high absorption capacity or separation efficiency and selectivity, simple and fast separation/absorption ability, excellent recyclability, economical efficiency and outstanding durability under harsh conditions. Then, related theories are proposed to understand the physical mechanisms that occur during the oil/water separation process. Finally, some challenges and promising breakthroughs in this field are also discussed. It is expected that special wettability stimulated oil/water separation materials can achieve industrial scale production and be put into use for oil spills and industrial oily wastewater treatment in the near future.

1,261 citations

Journal ArticleDOI
TL;DR: This Review describes the principles of materials with selective oil/water absorption and outline recent advances in oil/ water separation with superwetting/superantiwetting materials, including their design, their fabrication, and models of experimental setups.
Abstract: The separation of oil from oily water is an important pursuit because of increasing worldwide oil pollution. Separation by the use of materials with selective oil/water absorption is a relatively recent area of development, yet highly promising. Owing to their selective superantiwetting/superwetting properties towards water and oil, superhydrophobic/superoleophilic surfaces and underwater superoleophobic surfaces have been developed for the separation of oil/water-free mixtures and emulsions. In this Review, after a short introduction to oil/water separation, we describe the principles of materials with selective oil/water absorption and outline recent advances in oil/water separation with superwetting/superantiwetting materials, including their design, their fabrication, and models of experimental setups. Finally, we discuss the current state of this new field and point out the remaining problems and future challenges.

1,009 citations

Journal ArticleDOI
TL;DR: While the fragility of superhydrophobic surfaces currently limits their applicability, development of mechanically durable surfaces will enable a wide range of new applications in the future.
Abstract: Development of durable non-wetting surfaces is hindered by the fragility of the microscopic roughness features that are necessary for superhydrophobicity. Mechanical wear on superhydrophobic surfaces usually shows as increased sticking of water, leading to loss of non-wettability. Increased wear resistance has been demonstrated by exploiting hierarchical roughness where nanoscale roughness is protected to some degree by large scale features, and avoiding the use of hydrophilic bulk materials is shown to help prevent the formation of hydrophilic defects as a result of wear. Additionally, self-healing hydrophobic layers and roughness patterns have been suggested and demonstrated. Nevertheless, mechanical contact not only causes damage to roughness patterns but also surface contamination, which shortens the lifetime of superhydrophobic surfaces in spite of the self-cleaning effect. The use of photocatalytic effect and reduced electric resistance have been suggested to prevent the accumulation of surface contaminants. Resistance to organic contaminants is more challenging, however, oleophobic surface patterns which are non-wetting to organic liquids have been demonstrated. While the fragility of superhydrophobic surfaces currently limits their applicability, development of mechanically durable surfaces will enable a wide range of new applications in the future.

915 citations