Lei Zhu

Bio: Lei Zhu is an academic researcher from University of Macau. The author has contributed to research in topics: Band-pass filter & Resonator. The author has an hindex of 58, co-authored 672 publications receiving 13504 citations. Previous affiliations of Lei Zhu include Nanjing University of Posts and Telecommunications & École Polytechnique de Montréal.

Ultra-wideband (UWB) bandpass filters using multiple-mode resonator

Abstract: A novel microstrip-line ultra-wideband (UWB) bandpass filter is proposed and implemented using a multiple-mode resonator (MMR), aiming at transmitting the signals in the whole UWB passband of 3.1-10.6GHz. In the design, the first three resonant frequencies of this MMR are properly adjusted to be placed quasiequally within the UWB. Then, the parallel-coupled lines at the two sides are longitudinally stretched so as to raise the frequency-dispersive coupling degree with the coupling peak near the center of the UWB. After optimization of this filter, a good UWB bandpass behavior with five transmission poles is theoretically realized and experimentally confirmed. Within the whole UWB passband, the return loss is found higher than 10dB, and the group delay variation is less than 0.23ns.

Ultra-wideband bandpass filter with hybrid microstrip/CPW structure

Abstract: A novel ultra-wideband (UWB) bandpass filter (BPF) is presented using the hybrid microstrip and coplanar waveguide (CPW) structure. A CPW nonuniform resonator or multiple-mode resonator (MMR) is constructed to produce its first three resonant modes occurring around the lower end, center, and higher end of the UWB band. Then, a microstrip/CPW surface-to-surface coupled line is formed and modeled to allocate the enhanced coupling peak around the center of this UWB band, i.e., 6.85GHz. As such, a five-pole UWB BPF is built up and realized with the passband covering the entire UWB band (3.1-10.6GHz). A predicted frequency response is finally verified by the experiment. In addition, the designed UWB filter, with a single resonator, only occupies one full-wavelength in length or 16.9mm.

Compact UWB Bandpass Filter Using Stub-Loaded Multiple-Mode Resonator

Abstract: A compact microstrip-line ultra-wideband (UWB) bandpass filter (BPF) using the proposed stub-loaded multiple-mode resonator (MMR) is presented. This MMR is formed by loading three open-ended stubs in shunt to a simple stepped-impedance resonator in center and two symmetrical locations, respectively. By properly adjusting the lengths of these stubs, the first four resonant modes of this MMR can be evenly allocated within the 3.1-to-10.6 GHz UWB band while the fifth resonant frequency is raised above 15.0GHz. It results in the formulation of a novel UWB BPF with compact-size and widened upper-stopband by incorporating this MMR with two interdigital parallel-coupled feed lines. Simulated and measured results are found in good agreement with each other, showing improved UWB bandpass behaviors with the insertion loss lower than 0.8dB, return loss higher than 14.3dB, and maximum group delay variation less than 0.64ns in the realized UWB passband

Compact dual-band microstrip bandpass filter without external feeds

Abstract: A compact dual-band microstrip bandpass filter is proposed and designed to operate at 2.4 and 5.2GHz without needing any external impedance-matching block. The modified half-wavelength stepped-impedance resonator with sinuous configuration is constructed to simultaneously excite the dual resonances at these two specified frequencies with miniaturized overall size. The parallel-coupled microstrip line is properly characterized to minimize the return losses within both dual passbands. The optimized results exhibit the good dual-band filtering performances with return losses higher than 20dB as well being confirmed by experimentation with a fabricated filter circuit.

New planar dual-mode filter using cross-slotted patch resonator for simultaneous size and loss reduction

Abstract: A class of new planar dual-mode filters are proposed and developed for hybrid and monolithic microwave and millimeter-wave integrated-circuit design. The novelty of the proposed structure is to use a pair of unequal crossed slots that are formed on a square patch resonator such that its radiation loss and structure size can be significantly reduced simultaneously. The physical background of the crossed slots on the patch resonator is explained. Our simulation results show that the proposed filter presents a number of attractive features for practical applications. It is found that the resonant frequency of a filter is reduced, e.g., by 36%, while its unloaded Q/sub 0/ is improved from 180 to 310 as the crossed slot length increases. The coupling characteristics of two degenerate modes backed by a resonator are studied with respect to unequal length of the crossed slots. A dual-mode filter is designed and fabricated with 1.6% bandwidth operating at 1.6 GHz to showcase our proposal. Measured results validate the design predictions well.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Microstrip filters for RF/microwave applications

Abstract: Preface to the Second Edition. Preface to the First Edition. 1 Introduction. 2 Network Analysis. 2.1 Network Variables. 2.2 Scattering Parameters. 2.3 Short-Circuit Admittance Parameters. 2.4 Open-Circuit Impedance Parameters. 2.5 ABCD Parameters. 2.6 Transmission-Line Networks. 2.7 Network Connections. 2.8 Network Parameter Conversions. 2.9 Symmetrical Network Analysis. 2.10 Multiport Networks. 2.11 Equivalent and Dual Network. 2.12 Multimode Networks. 3 Basic Concepts and Theories of Filters. 3.1 Transfer Functions. 3.2 Lowpass Prototype Filters and Elements. 3.3 Frequency and Element Transformations. 3.4 Immittance Inverters. 3.5 Richards' Transformation and Kuroda Identities. 3.6 Dissipation and Unloaded Quality Factor. 4 Transmission Lines and Components. 4.1 Microstrip Lines. 4.2 Coupled Lines. 4.3 Discontinuities and Components. 4.4 Other Types of Microstrip Lines. 4.5 Coplanar Waveguide (CPW). 4.6 Slotlines. 5 Lowpass and Bandpass Filters. 5.1 Lowpass Filters. 5.2 Bandpass Filters. 6 Highpass and Bandstop Filters. 6.1 Highpass Filters. 6.2 Bandstop Filters. 7 Coupled-Resonator Circuits. 7.1 General Coupling Matrix for Coupled-Resonator Filters. 7.2 General Theory of Couplings. 7.3 General Formulation for Extracting Coupling Coefficient k. 7.4 Formulation for Extracting External Quality Factor Qe. 7.5 Numerical Examples. 7.6 General Coupling Matrix Including Source and Load. 8 CAD for Low-Cost and High-Volume Production. 8.1 Computer-Aided Design (CAD) Tools. 8.2 Computer-Aided Analysis (CAA). 8.3 Filter Synthesis by Optimization. 8.4 CAD Examples. 9 Advanced RF/Microwave Filters. 9.1 Selective Filters with a Single Pair of Transmission Zeros. 9.2 Cascaded Quadruplet (CQ) Filters. 9.3 Trisection and Cascaded Trisection (CT) Filters. 9.4 Advanced Filters with Transmission-Line Inserted Inverters. 9.5 Linear-Phase Filters. 9.6 Extracted Pole Filters. 9.7 Canonical Filters. 9.8 Multiband Filters. 10 Compact Filters and Filter Miniaturization. 10.1 Miniature Open-Loop and Hairpin Resonator Filters. 10.2 Slow-Wave Resonator Filters. 10.3 Miniature Dual-Mode Resonator Filters. 10.4 Lumped-Element Filters. 10.5 Miniature Filters Using High Dielectric-Constant Substrates. 10.6 Multilayer Filters. 11 Superconducting Filters. 11.1 High-Temperature Superconducting (HTS) Materials. 11.2 HTS Filters for Mobile Communications. 11.3 HTS Filters for Satellite Communications. 11.4 HTS Filters for Radio Astronomy and Radar. 11.5 High-Power HTS Filters. 11.6 Cryogenic Package. 12 Ultra-Wideband (UWB) Filters. 12.1 UWB Filters with Short-Circuited Stubs. 12.2 UWB-Coupled Resonator Filters. 12.3 Quasilumped Element UWB Filters. 12.4 UWB Filters Using Cascaded Miniature High- And Lowpass Filters. 12.5 UWB Filters with Notch Band(s). 13 Tunable and Reconfigurable Filters. 13.1 Tunable Combline Filters. 13.2 Tunable Open-Loop Filters without Via-Hole Grounding. 13.3 Reconfigurable Dual-Mode Bandpass Filters. 13.4 Wideband Filters with Reconfigurable Bandwidth. 13.5 Reconfigurable UWB Filters. 13.6 RF MEMS Reconfigurable Filters. 13.7 Piezoelectric Transducer Tunable Filters. 13.8 Ferroelectric Tunable Filters. Appendix: Useful Constants and Data. A.1 Physical Constants. A.2 Conductivity of Metals at 25 C (298K). A.3 Electical Resistivity rho in 10-8 m of Metals. A.4 Properties of Dielectric Substrates. Index.

Photonic crystals

Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

Guided-wave and leakage characteristics of substrate integrated waveguide

Abstract: The substrate integrated waveguide (SIW) technique makes it possible that a complete circuit including planar circuitry, transitions, and rectangular waveguides are fabricated in planar form using a standard printed circuit board or other planar processing techniques. In this paper, guided wave and modes characteristics of such an SIW periodic structure are studied in detail for the first time. A numerical multimode calibration procedure is proposed and developed with a commercial software package on the basis of a full-wave finite-element method for the accurate extraction of complex propagation constants of the SIW structure. Two different lengths of the SIW are numerically simulated under multimode excitation. By means of our proposed technique, the complex propagation constant of each SIW mode can accurately be extracted and the electromagnetic bandstop phenomena of periodic structures are also investigated. Experiments are made to validate our proposed technique. Simple design rules are provided and discussed.

Ultra-wideband (UWB) bandpass filters using multiple-mode resonator

Abstract: A novel microstrip-line ultra-wideband (UWB) bandpass filter is proposed and implemented using a multiple-mode resonator (MMR), aiming at transmitting the signals in the whole UWB passband of 3.1-10.6GHz. In the design, the first three resonant frequencies of this MMR are properly adjusted to be placed quasiequally within the UWB. Then, the parallel-coupled lines at the two sides are longitudinally stretched so as to raise the frequency-dispersive coupling degree with the coupling peak near the center of the UWB. After optimization of this filter, a good UWB bandpass behavior with five transmission poles is theoretically realized and experimentally confirmed. Within the whole UWB passband, the return loss is found higher than 10dB, and the group delay variation is less than 0.23ns.