Lekha Charan Meher

Bio: Lekha Charan Meher is an academic researcher from Defence Research and Development Organisation. The author has contributed to research in topics: Biodiesel & Transesterification. The author has an hindex of 13, co-authored 23 publications receiving 5605 citations. Previous affiliations of Lekha Charan Meher include Indian Institute of Technology Delhi & University of Saskatchewan.

Technical aspects of biodiesel production by transesterification—a review

Abstract: Biodiesel is gaining more and more importance as an attractive fuel due to the depleting fossil fuel resources. Chemically biodiesel is monoalkyl esters of long chain fatty acids derived from renewable feed stock like vegetable oils and animal fats. It is produced by transesterification in which, oil or fat is reacted with a monohydric alcohol in presence of a catalyst. The process of transesterification is affected by the mode of reaction condition, molar ratio of alcohol to oil, type of alcohol, type and amount of catalysts, reaction time and temperature and purity of reactants. In the present paper various methods of preparation of biodiesel with different combination of oil and catalysts have been described. The technical tools and processes for monitoring the transesterification reactions like TLC, GC, HPLC, GPC, 1H NMR and NIR have also been summarized. In addition, fuel properties and specifications provided by different countries are discussed.

Solid acid catalyzed biodiesel production from waste cooking oil

Abstract: Various solid acid catalysts were evaluated for the production of biodiesel from low quality oil such as waste cooking oil (WCO) containing 15 wt.% free fatty acids. The zinc stearate immobilized on silica gel (ZS/Si) was the most effective catalyst in simultaneously catalyzing the transesterification of triglycerides and esterification of free fatty acid (FFA) present in WCO to methyl esters. The optimization of reaction parameters with the most active ZS/Si catalyst showed that at 200 °C, 1:18 oil to alcohol molar ratio and 3 wt.% catalysts loading, a maximum ester yield of 98 wt.% could be obtained. The catalysts were recycled and reused many times without any loss in activity.

Production of biodiesel from high free fatty acid Karanja (Pongamia pinnata) oil

Abstract: Non-edible oil contains several unsaponifiable and toxic components, which make them unsuitable for human consumption. Karanja ( Pongamia pinnata ) is an underutilized plant which is grown in many parts of India. Sometimes the oil is contaminated with high free fatty acids (FFAs) depending upon the moisture content in the seed during collection as well as oil expression. The present study deals with production of biodiesel from high FFA Karanja oil because the conventional alkali-catalyzed route is not the feasible route. This paper discusses the mechanism of a dual process adopted for the production of biodiesel from Karanja oil containing FFA up to 20%. The first step is acid-catalyzed esterification by using 0.5% H 2 SO 4 , alcohol 6:1 molar ratio with respect to the high FFA Karanja oil to produce methyl ester by lowering the acid value, and the next step is alkali-catalyzed transesterification. The yield of biodiesel from high FFA Karanja oil by dual step process has been observed to be 96.6–97%.

Production of first and second generation biofuels: A comprehensive review

Abstract: Sustainable economic and industrial growth requires safe, sustainable resources of energy. For the future re-arrangement of a sustainable economy to biological raw materials, completely new approaches in research and development, production, and economy are necessary. The ‘first-generation’ biofuels appear unsustainable because of the potential stress that their production places on food commodities. For organic chemicals and materials these needs to follow a biorefinery model under environmentally sustainable conditions. Where these operate at present, their product range is largely limited to simple materials (i.e. cellulose, ethanol, and biofuels). Second generation biorefineries need to build on the need for sustainable chemical products through modern and proven green chemical technologies such as bioprocessing including pyrolysis, Fisher Tropsch, and other catalytic processes in order to make more complex molecules and materials on which a future sustainable society will be based. This review focus on cost effective technologies and the processes to convert biomass into useful liquid biofuels and bioproducts, with particular focus on some biorefinery concepts based on different feedstocks aiming at the integral utilization of these feedstocks for the production of value added chemicals.

Role of renewable energy sources in environmental protection: A review

Abstract: Renewable technologies are considered as clean sources of energy and optimal use of these resources minimize environmental impacts, produce minimum secondary wastes and are sustainable based on current and future economic and social societal needs. Sun is the source of all energies. The primary forms of solar energy are heat and light. Sunlight and heat are transformed and absorbed by the environment in a multitude of ways. Some of these transformations result in renewable energy flows such as biomass and wind energy. Renewable energy technologies provide an excellent opportunity for mitigation of greenhouse gas emission and reducing global warming through substituting conventional energy sources. In this article a review has been done on scope of CO2 mitigation through solar cooker, water heater, dryer, biofuel, improved cookstoves and by hydrogen.