scispace - formally typeset
Search or ask a question
Author

Lester Andrews

Bio: Lester Andrews is an academic researcher from University of Virginia. The author has contributed to research in topics: Infrared spectroscopy & Molecule. The author has an hindex of 68, co-authored 888 publications receiving 24613 citations. Previous affiliations of Lester Andrews include Ames Research Center & Environmental Molecular Sciences Laboratory.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, laser-ablated boron atoms (10B, 11B) have been reacted with hydrogen cyanide (HCN, H13CN, DCN) during condensation in excess argon at 6−7 K.
Abstract: Laser-ablated boron atoms (10B, 11B) have been reacted with hydrogen cyanide (HCN, H13CN, DCN) during condensation in excess argon at 6−7 K. The major products observed in the matrix infrared spect...

22 citations

Journal ArticleDOI
TL;DR: In this article, small iridium high oxidation-state complexes with carbon-iridium multiple bonds are identified in the product matrix infrared spectra from reactions of laser-ablated Ir atoms with tetra-, tri- and dihalomethanes.
Abstract: Small iridium high oxidation-state complexes with carbon–iridium multiple bonds are identified in the product matrix infrared spectra from reactions of laser-ablated Ir atoms with tetra-, tri- and dihalomethanes. In contrast to the previously studied Rh case, Ir carbyne complexes (XCIrX3) are generated in reactions of tetrahalomethanes, and their short Ir–C bond lengths of 1.725–1.736 A are appropriate for the carbon–metal triple bonds. DFT calculations also show that the Ir carbynes with an Ir–F bond have unusual square planar structures, similar to the recently discovered Ru planar complexes. Diminishing preference for the carbyne complexes leads to methylidene product absorptions in the tri- and dihalomethane spectra, marking a limit for generation of small metal carbynes. The insertion complexes, on the other hand, are not observed in this study, suggesting that X migration from C to Ir following initial C–X insertion is swift.

22 citations

Journal ArticleDOI
TL;DR: CH(2)-LnHF does not form a π-bond between Ln and C and is best described as a LnHF-substituted CH(3) radical, with an unpaired p electron on C weakly interacting with the unpaired f electrons on the Ln.
Abstract: Lanthanide metal atoms, produced by laser ablation, were condensed with CH3F in excess Ar at 8 K. New infrared absorption bands are assigned to the first insertion CH3LnF and oxidative addition methylene lanthanide hydride fluoride CH2LnHF products on the basis of 13C and deuterium substitution and density functional theory calculations of the vibrational frequencies. It is also possible to observe the cationic species CH3LnF+ for some Ln. For Ln = Eu and Yb, only CH3LnF is observed. CH3LnF in the Ln formal +2 state is predicted to be more stable than CH2LnHF with the Ln in the formal +3 oxidation state. CH3-LnF forms a single bond between Ln and C and is a substituted methane. Similar to CH2-LnF2, CH2-LnHF does not form a π-bond between Ln and C and is best described as a LnHF-substituted CH3 radical, with an unpaired p electron on C weakly interacting with the unpaired f electrons on the Ln. The calculated potential energy surface for the CH3F + La → CH3-LaF/CH2-LaHF shows a number of intermediates and ...

22 citations


Cited by
More filters
Book
01 Sep 2001
TL;DR: A Chemist's Guide to Density Functional Theory should be an invaluable source of insight and knowledge for many chemists using DFT approaches to solve chemical problems.
Abstract: "Chemists familiar with conventional quantum mechanics will applaud and benefit greatly from this particularly instructive, thorough and clearly written exposition of density functional theory: its basis, concepts, terms, implementation, and performance in diverse applications. Users of DFT for structure, energy, and molecular property computations, as well as reaction mechanism studies, are guided to the optimum choices of the most effective methods. Well done!" Paul von RaguE Schleyer "A conspicuous hole in the computational chemist's library is nicely filled by this book, which provides a wide-ranging and pragmatic view of the subject.[...It] should justifiably become the favorite text on the subject for practioneers who aim to use DFT to solve chemical problems." J. F. Stanton, J. Am. Chem. Soc. "The authors' aim is to guide the chemist through basic theoretical and related technical aspects of DFT at an easy-to-understand theoretical level. They succeed admirably." P. C. H. Mitchell, Appl. Organomet. Chem. "The authors have done an excellent service to the chemical community. [...] A Chemist's Guide to Density Functional Theory is exactly what the title suggests. It should be an invaluable source of insight and knowledge for many chemists using DFT approaches to solve chemical problems." M. Kaupp, Angew. Chem.

3,550 citations

Journal ArticleDOI
TL;DR: In this paper, the authors survey the local density functional formalism and some of its applications and discuss the reasons for the successes and failures of the local-density approximation and some modifications.
Abstract: A scheme that reduces the calculations of ground-state properties of systems of interacting particles exactly to the solution of single-particle Hartree-type equations has obvious advantages. It is not surprising, then, that the density functional formalism, which provides a way of doing this, has received much attention in the past two decades. The quality of the energy surfaces calculated using a simple local-density approximation for exchange and correlation exceeds by far the original expectations. In this work, the authors survey the formalism and some of its applications (in particular to atoms and small molecules) and discuss the reasons for the successes and failures of the local-density approximation and some of its modifications.

3,285 citations

Journal ArticleDOI
TL;DR: The specific advantages brought up by a design based on the use of the halogen bond will be demonstrated in quite different fields spanning from material sciences to biomolecular recognition and drug design.
Abstract: The halogen bond occurs when there is evidence of a net attractive interaction between an electrophilic region associated with a halogen atom in a molecular entity and a nucleophilic region in another, or the same, molecular entity. In this fairly extensive review, after a brief history of the interaction, we will provide the reader with a snapshot of where the research on the halogen bond is now, and, perhaps, where it is going. The specific advantages brought up by a design based on the use of the halogen bond will be demonstrated in quite different fields spanning from material sciences to biomolecular recognition and drug design.

2,582 citations

Journal ArticleDOI
TL;DR: The detection methods and generation mechanisms of the intrinsic reactive oxygen species (ROS) in photocatalysis were surveyed comprehensively and the major photocatalyst used in heterogeneous photocatalytic systems was found to be TiO2.
Abstract: The detection methods and generation mechanisms of the intrinsic reactive oxygen species (ROS), i.e., superoxide anion radical (•O2–), hydrogen peroxide (H2O2), singlet oxygen (1O2), and hydroxyl radical (•OH) in photocatalysis, were surveyed comprehensively. Consequently, the major photocatalyst used in heterogeneous photocatalytic systems was found to be TiO2. However, besides TiO2 some representative photocatalysts were also involved in the discussion. Among the various issues we focused on the detection methods and generation reactions of ROS in the aqueous suspensions of photocatalysts. On the careful account of the experimental results presented so far, we proposed the following apprehension: adsorbed •OH could be regarded as trapped holes, which are involved in a rapid adsorption–desorption equilibrium at the TiO2–solution interface. Because the equilibrium shifts to the adsorption side, trapped holes must be actually the dominant oxidation species whereas •OH in solution would exert the reactivity...

2,249 citations

01 Feb 1995
TL;DR: In this paper, the unpolarized absorption and circular dichroism spectra of the fundamental vibrational transitions of the chiral molecule, 4-methyl-2-oxetanone, are calculated ab initio using DFT, MP2, and SCF methodologies and a 5S4P2D/3S2P (TZ2P) basis set.
Abstract: : The unpolarized absorption and circular dichroism spectra of the fundamental vibrational transitions of the chiral molecule, 4-methyl-2-oxetanone, are calculated ab initio. Harmonic force fields are obtained using Density Functional Theory (DFT), MP2, and SCF methodologies and a 5S4P2D/3S2P (TZ2P) basis set. DFT calculations use the Local Spin Density Approximation (LSDA), BLYP, and Becke3LYP (B3LYP) density functionals. Mid-IR spectra predicted using LSDA, BLYP, and B3LYP force fields are of significantly different quality, the B3LYP force field yielding spectra in clearly superior, and overall excellent, agreement with experiment. The MP2 force field yields spectra in slightly worse agreement with experiment than the B3LYP force field. The SCF force field yields spectra in poor agreement with experiment.The basis set dependence of B3LYP force fields is also explored: the 6-31G* and TZ2P basis sets give very similar results while the 3-21G basis set yields spectra in substantially worse agreements with experiment. jg

1,652 citations