scispace - formally typeset
Search or ask a question
Author

Li Lu

Bio: Li Lu is an academic researcher from Singapore University of Technology and Design. The author has contributed to research in topics: Physics & Magnetoresistance. The author has an hindex of 35, co-authored 111 publications receiving 7035 citations. Previous affiliations of Li Lu include Center for Excellence in Education & National University of Singapore.


Papers
More filters
Journal ArticleDOI
12 Apr 2013-Science
TL;DR: The observation of the quantum anomalous Hall (QAH) effect in thin films of chromium-doped (Bi,Sb)2Te3, a magnetic topological insulator shows a plateau in the Hall resistance as a function of the gating voltage without any applied magnetic fields, signifying the achievement of the QAH state.
Abstract: The quantized version of the anomalous Hall effect has been predicted to occur in magnetic topological insulators, but the experimental realization has been challenging. Here, we report the observation of the quantum anomalous Hall (QAH) effect in thin films of chromium-doped (Bi,Sb)2Te3, a magnetic topological insulator. At zero magnetic field, the gate-tuned anomalous Hall resistance reaches the predicted quantized value of h/e2, accompanied by a considerable drop in the longitudinal resistance. Under a strong magnetic field, the longitudinal resistance vanishes, whereas the Hall resistance remains at the quantized value. The realization of the QAH effect may lead to the development of low-power-consumption electronics.

2,972 citations

Journal ArticleDOI
01 Apr 2018-Nature
TL;DR: Molten-salt-assisted chemical vapour deposition is used to synthesize a wide variety of two-dimensional transition-metal chalcogenides and elaborate how the salt decreases the melting point of the reactants and facilitates the formation of intermediate products, increasing the overall reaction rate.
Abstract: Investigations of two-dimensional transition-metal chalcogenides (TMCs) have recently revealed interesting physical phenomena, including the quantum spin Hall effect1,2, valley polarization3,4 and two-dimensional superconductivity 5 , suggesting potential applications for functional devices6–10. However, of the numerous compounds available, only a handful, such as Mo- and W-based TMCs, have been synthesized, typically via sulfurization11–15, selenization16,17 and tellurization 18 of metals and metal compounds. Many TMCs are difficult to produce because of the high melting points of their metal and metal oxide precursors. Molten-salt-assisted methods have been used to produce ceramic powders at relatively low temperature 19 and this approach 20 was recently employed to facilitate the growth of monolayer WS2 and WSe2. Here we demonstrate that molten-salt-assisted chemical vapour deposition can be broadly applied for the synthesis of a wide variety of two-dimensional (atomically thin) TMCs. We synthesized 47 compounds, including 32 binary compounds (based on the transition metals Ti, Zr, Hf, V, Nb, Ta, Mo, W, Re, Pt, Pd and Fe), 13 alloys (including 11 ternary, one quaternary and one quinary), and two heterostructured compounds. We elaborate how the salt decreases the melting point of the reactants and facilitates the formation of intermediate products, increasing the overall reaction rate. Most of the synthesized materials in our library are useful, as supported by evidence of superconductivity in our monolayer NbSe2 and MoTe2 samples21,22 and of high mobilities in MoS2 and ReS2. Although the quality of some of the materials still requires development, our work opens up opportunities for studying the properties and potential application of a wide variety of two-dimensional TMCs.

1,174 citations

Journal ArticleDOI
TL;DR: In this paper, a method for simultaneously measuring the specific heat and thermal conductivity of a rod- or filament-like specimen using a way similar to a four-probe resistance measurement is presented.
Abstract: We present a 3ω method for simultaneously measuring the specific heat and thermal conductivity of a rod- or filament-like specimen using a way similar to a four-probe resistance measurement. The specimen in this method needs to be electrically conductive and with a temperature-dependent resistance, for acting both as a heater to create a temperature fluctuation and as a sensor to measure its thermal response. With this method, we have successfully measured the specific heat and thermal conductivity of platinum wire specimens at cryogenic temperatures, and measured those thermal quantities of tiny carbon nanotube bundles some of which are only ∼10−9 g in mass.

399 citations

Journal ArticleDOI
TL;DR: In this article, a 3 omega method for simultaneously measuring the specific heat and thermal conductivity of a rod- or filament-like specimen using a way similar to a four-probe resistance measurement is presented.
Abstract: We present a 3 omega method for simultaneously measuring the specific heat and thermal conductivity of a rod- or filament-like specimen using a way similar to a four-probe resistance measurement. The specimen in this method needs to be electrically conductive and with a temperature-dependent resistance, for acting both as a heater to create a temperature fluctuation and as a sensor to measure its thermal response. With this method we have successfully measured the specific heat and thermal conductivity of platinum wire specimens at cryogenic temperatures, and measured those thermal quantities of tiny carbon nanotube bundles some of which are only 10^-9 g in mass.

321 citations

Journal ArticleDOI
TL;DR: The photoincluced charge transfer is confirmed by photoconductivity measurements and the photosensitivity is improved with increasing loadings of quantum dots, opening up a new effective route to form composites for future large-area flexible and transparent optoelectronic devices.
Abstract: The preparation and optoelectronic response of flexible composites via non-covalent coupling of quantum dots to chemically converted graphene is presented. The photoincluced charge transfer is confirmed by photoconductivity measurements and the photosensitivity is improved with increasing loadings of quantum dots. This opens up a new effective route to form composites for future large-area flexible and transparent optoelectronic devices.

282 citations


Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

Journal ArticleDOI
TL;DR: In this article, the authors examined the methods used to synthesize transition metal dichalcogenides (TMDCs) and their properties with particular attention to their charge density wave, superconductive and topological phases, along with their applications in devices with enhanced mobility and with the use of strain engineering to improve their properties.
Abstract: Graphene is very popular because of its many fascinating properties, but its lack of an electronic bandgap has stimulated the search for 2D materials with semiconducting character. Transition metal dichalcogenides (TMDCs), which are semiconductors of the type MX2, where M is a transition metal atom (such as Mo or W) and X is a chalcogen atom (such as S, Se or Te), provide a promising alternative. Because of its robustness, MoS2 is the most studied material in this family. TMDCs exhibit a unique combination of atomic-scale thickness, direct bandgap, strong spin–orbit coupling and favourable electronic and mechanical properties, which make them interesting for fundamental studies and for applications in high-end electronics, spintronics, optoelectronics, energy harvesting, flexible electronics, DNA sequencing and personalized medicine. In this Review, the methods used to synthesize TMDCs are examined and their properties are discussed, with particular attention to their charge density wave, superconductive and topological phases. The use of TMCDs in nanoelectronic devices is also explored, along with strategies to improve charge carrier mobility, high frequency operation and the use of strain engineering to tailor their properties. Two-dimensional transition metal dichalcogenides (TMDCs) exhibit attractive electronic and mechanical properties. In this Review, the charge density wave, superconductive and topological phases of TMCDs are discussed, along with their synthesis and applications in devices with enhanced mobility and with the use of strain engineering to improve their properties.

3,436 citations

Journal ArticleDOI
TL;DR: Weyl and Dirac semimetals as discussed by the authors are three-dimensional phases of matter with gapless electronic excitations that are protected by topology and symmetry, and they have generated much recent interest.
Abstract: Weyl and Dirac semimetals are three-dimensional phases of matter with gapless electronic excitations that are protected by topology and symmetry. As three-dimensional analogs of graphene, they have generated much recent interest. Deep connections exist with particle physics models of relativistic chiral fermions, and, despite their gaplessness, to solid-state topological and Chern insulators. Their characteristic electronic properties lead to protected surface states and novel responses to applied electric and magnetic fields. The theoretical foundations of these phases, their proposed realizations in solid-state systems, and recent experiments on candidate materials as well as their relation to other states of matter are reviewed.

3,407 citations

Journal ArticleDOI
TL;DR: In this paper, ultrathin epitaxial graphite films were grown by thermal decomposition on the (0001) surface of 6H−SiC, and characterized by surface science techniques.
Abstract: We have produced ultrathin epitaxial graphite films which show remarkable 2D electron gas (2DEG) behavior. The films, composed of typically three graphene sheets, were grown by thermal decomposition on the (0001) surface of 6H−SiC, and characterized by surface science techniques. The low-temperature conductance spans a range of localization regimes according to the structural state (square resistance 1.5 kΩ to 225 kΩ at 4 K, with positive magnetoconductance). Low-resistance samples show characteristics of weak localization in two dimensions, from which we estimate elastic and inelastic mean free paths. At low field, the Hall resistance is linear up to 4.5 T, which is well-explained by n-type carriers of density 1012 cm-2 per graphene sheet. The most highly ordered sample exhibits Shubnikov−de Haas oscillations that correspond to nonlinearities observed in the Hall resistance, indicating a potential new quantum Hall system. We show that the high-mobility films can be patterned via conventional lithographic...

3,315 citations

Journal ArticleDOI
26 Apr 2017
TL;DR: In this paper, the authors reported the experimental discovery of intrinsic ferromagnetism in Cr 2 Ge 2 Te 6 atomic layers by scanning magneto-optic Kerr microscopy.
Abstract: We report the experimental discovery of intrinsic ferromagnetism in Cr 2 Ge 2 Te 6 atomic layers by scanning magneto-optic Kerr microscopy. In this 2D van der Waals ferromagnet, unprecedented control of transition temperature is realized via small magnetic fields.

3,215 citations