scispace - formally typeset
Search or ask a question
Author

Lílian Lefol Nani Guarieiro

Bio: Lílian Lefol Nani Guarieiro is an academic researcher from SENAI. The author has contributed to research in topics: Biodiesel & Diesel fuel. The author has an hindex of 13, co-authored 44 publications receiving 1695 citations. Previous affiliations of Lílian Lefol Nani Guarieiro include Federal University of Bahia & Federal University of Rio de Janeiro.
Topics: Biodiesel, Diesel fuel, Biofuel, NOx, Diesel engine


Papers
More filters
Journal ArticleDOI
TL;DR: The importance of biodiesel production was analyzed based on scientific articles and patents as discussed by the authors, and critical analysis was presented on the most used oil sources, the catalysts and the methods to verify the transesterification yields.
Abstract: The importance of biodiesel production was analyzed based on scientific articles and patents. A critical analysis was presented on the most used oil sources, the catalysts and the methods to verify the transesterification yields. Also analyzed were the comparative studies on emissions from pure fossil diesel and mixtures with biodiesel in variable proportions. Finally some challenges and considerations focused on technological, agronomic and infrastructure aspects of biodiesel production were indicated.

770 citations

Journal ArticleDOI
TL;DR: However, there are major drawbacks in the use of biofuel blends as NOx tends to be higher, the intervals of motor parts replacement such as fuel filters are reduced and degradation by chronic exposure of varnish deposits in fuel tanks and fuel lines, paint, concrete, and paving occurs as some materials are incompatible as mentioned in this paper.
Abstract: Around the world, there is a growing increase in biofuels consumption, mainly ethanol and biodiesel as well as their blends with diesel that reduce the cost impact of biofuels while retaining some of the advantages of the biofuels. This increase is due to several factors like decreasing the dependence on imported petroleum; providing a market for the excess production of vegetable oils and animal fats; using renewable and biodegradable fuels; reducing global warming due to its closed carbon cycle by CO2 recycling; increasing lubricity; and reducing substantially the exhaust emissions of carbon monoxide, unburned hydrocarbons, and particulate emissions from diesel engines. However, there are major drawbacks in the use of biofuel blends as NOx tends to be higher, the intervals of motor parts replacement such as fuel filters are reduced and degradation by chronic exposure of varnish deposits in fuel tanks and fuel lines, paint, concrete, and paving occurs as some materials are incompatible. Here, fuel additi...

463 citations

Journal ArticleDOI
TL;DR: In this paper, 45 fuel blends were prepared and their stability was evaluated and the following mixtures were stable for the 90-day period and were used in the emission study: diesel/ethanol, ethanol, biodiesel, and castor oil.

128 citations

Journal ArticleDOI
TL;DR: In this paper, a comparison was carried out between the two most widely used CC collection methods: C18 cartridges coated with an acid solution of 2,4dinitrophenylhydrazine (2,4-DNPH) and impinger bottles filled in 2, 4DNPH solution.

85 citations

Journal ArticleDOI
01 Feb 2012-Fuel
TL;DR: In this paper, the authors measured carbonyl compounds (CC) were measured in vapor samples from a place impacted by heavy-duty vehicles (Bus Station) fuelled with diesel/biodiesel fuel blend (B5) in Salvador, Brazil Among them, formaldehyde, acetaldehyde and propanone were the most abundant quantified compounds.

56 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In the present study, 2-NBA, 3-NBA and selected PAHs and Nitro-PAHs were determined in fine particle samples collected in a bus station and an outdoor site, showing low cancer risk incidence and incremental lifetime cancer risk (ILCR) calculated for both places.
Abstract: Polycyclic aromatic compounds (PACs) are known due to their mutagenic activity. Among them, 2-nitrobenzanthrone (2-NBA) and 3-nitrobenzanthrone (3-NBA) are considered as two of the most potent mutagens found in atmospheric particles. In the present study 2-NBA, 3-NBA and selected PAHs and Nitro-PAHs were determined in fine particle samples (PM 2.5) collected in a bus station and an outdoor site. The fuel used by buses was a diesel-biodiesel (96:4) blend and light-duty vehicles run with any ethanol-to-gasoline proportion. The concentrations of 2-NBA and 3-NBA were, on average, under 14.8 µg g−1 and 4.39 µg g−1, respectively. In order to access the main sources and formation routes of these compounds, we performed ternary correlations and multivariate statistical analyses. The main sources for the studied compounds in the bus station were diesel/biodiesel exhaust followed by floor resuspension. In the coastal site, vehicular emission, photochemical formation and wood combustion were the main sources for 2-NBA and 3-NBA as well as the other PACs. Incremental lifetime cancer risk (ILCR) were calculated for both places, which presented low values, showing low cancer risk incidence although the ILCR values for the bus station were around 2.5 times higher than the ILCR from the coastal site.

5,412 citations

Journal ArticleDOI
TL;DR: The most important variables affecting methyl ester yield during the transesterification reaction are the molar ratio of alcohol to vegetable oil and the reaction temperature as discussed by the authors, which is the commonly used alcohol in this process, due to its low cost.

1,798 citations

Journal ArticleDOI
TL;DR: In this article, the authors collected and analyzed the body of work written mainly in scientific journals about diesel engine emissions when using biodiesel fuels as opposed to conventional diesel fuels, focusing on the most concerning emissions: nitric oxides and particulate matter.

1,768 citations

Journal ArticleDOI
TL;DR: In this paper, the fatty acid (FA) profiles of 12 common biodiesel feedstocks were summarized, and it was shown that several fuel properties, including viscosity, specific gravity, cetane number, iodine value, and low temperature performance metrics are highly correlated with the average unsaturation of the FA profiles.
Abstract: Biodiesel is a renewable transportation fuel consisting of fatty acid methyl esters (FAME), generally produced by transesterification of vegetable oils and animal fats. In this review, the fatty acid (FA) profiles of 12 common biodiesel feedstocks were summarized. Considerable compositional variability exists across the range of feedstocks. For example, coconut, palm and tallow contain high amounts of saturated FA; while corn, rapeseed, safflower, soy, and sunflower are dominated by unsaturated FA. Much less information is available regarding the FA profiles of algal lipids that could serve as biodiesel feedstocks. However, some algal species contain considerably higher levels of poly-unsaturated FA than is typically found in vegetable oils. Differences in chemical and physical properties among biodiesel fuels can be explained largely by the fuels’ FA profiles. Two features that are especially influential are the size distribution and the degree of unsaturation within the FA structures. For the 12 biodiesel types reviewed here, it was shown that several fuel properties – including viscosity, specific gravity, cetane number, iodine value, and low temperature performance metrics – are highly correlated with the average unsaturation of the FAME profiles. Due to opposing effects of certain FAME structural features, it is not possible to define a single composition that is optimum with respect to all important fuel properties. However, to ensure satisfactory in-use performance with respect to low temperature operability and oxidative stability, biodiesel should contain relatively low concentrations of both long-chain saturated FAME and poly-unsaturated FAME.

1,527 citations

Journal ArticleDOI
TL;DR: In this article, a detailed review has been conducted to highlight different related aspects to the biodiesel industry, including, biodiesel feedstocks, extraction and production methods, properties and qualities of biodiesel, problems and potential solutions of using vegetable oil, advantages and disadvantages of biodies, the economical viability and finally the future of the future biodiesel.
Abstract: As the fossil fuels are depleting day by day, there is a need to find out an alternative fuel to fulfill the energy demand of the world. Biodiesel is one of the best available resources that have come to the forefront recently. In this paper, a detailed review has been conducted to highlight different related aspects to biodiesel industry. These aspects include, biodiesel feedstocks, extraction and production methods, properties and qualities of biodiesel, problems and potential solutions of using vegetable oil, advantages and disadvantages of biodiesel, the economical viability and finally the future of biodiesel. The literature reviewed was selective and critical. Highly rated journals in scientific indexes were the preferred choice, although other non-indexed publications, such as Scientific Research and Essays or some internal reports from highly reputed organizations such as International Energy Agency (IEA), Energy Information Administration (EIA) and British Petroleum (BP) have also been cited. Based on the overview presented, it is clear that the search for beneficial biodiesel sources should focus on feedstocks that do not compete with food crops, do not lead to land-clearing and provide greenhouse-gas reductions. These feedstocks include non-edible oils such as Jatropha curcas and Calophyllum inophyllum , and more recently microalgae and genetically engineered plants such as poplar and switchgrass have emerged to be very promising feedstocks for biodiesel production. It has been found that feedstock alone represents more than 75% of the overall biodiesel production cost. Therefore, selecting the best feedstock is vital to ensure low production cost. It has also been found that the continuity in transesterification process is another choice to minimize the production cost. Biodiesel is currently not economically feasible, and more research and technological development are needed. Thus supporting policies are important to promote biodiesel research and make their prices competitive with other conventional sources of energy. Currently, biodiesel can be more effective if used as a complement to other energy sources.

1,496 citations