scispace - formally typeset
Search or ask a question
Author

Lin Jiang

Bio: Lin Jiang is an academic researcher from Soochow University (Suzhou). The author has contributed to research in topics: Nanoparticle & Materials science. The author has an hindex of 36, co-authored 114 publications receiving 6467 citations. Previous affiliations of Lin Jiang include University of Münster & Jilin University.


Papers
More filters
Journal ArticleDOI
24 Jan 2012-ACS Nano
TL;DR: The unique characteristics of incident-light control, prompt photoswitching, and good photoresponsivity from the MoS(2) phototransistor pave an avenue to develop the single-layer semiconducting materials for multifunctional optoelectronic device applications in the future.
Abstract: A new phototransistor based on the mechanically exfoliated single-layer MoS2 nanosheet is fabricated, and its light-induced electric properties are investigated in detail. Photocurrent generated from the phototransistor is solely determined by the illuminated optical power at a constant drain or gate voltage. The switching behavior of photocurrent generation and annihilation can be completely finished within ca. 50 ms, and it shows good stability. Especially, the single-layer MoS2 phototransistor exhibits a better photoresponsivity as compared with the graphene-based device. The unique characteristics of incident-light control, prompt photoswitching, and good photoresponsivity from the MoS2 phototransistor pave an avenue to develop the single-layer semiconducting materials for multifunctional optoelectronic device applications in the future.

3,033 citations

Journal ArticleDOI
TL;DR: In this article, the authors reported that FeB2 nanoparticles, prepared by a facile chemical reduction of Fe2+ using LiBH4 in an organic solvent, are a superb bifunctional electrocatalyst for overall water splitting.
Abstract: Developing efficient, durable, and earth-abundant electrocatalysts for both hydrogen and oxygen evolution reactions is important for realizing large-scale water splitting. The authors report that FeB2 nanoparticles, prepared by a facile chemical reduction of Fe2+ using LiBH4 in an organic solvent, are a superb bifunctional electrocatalyst for overall water splitting. The FeB2 electrode delivers a current density of 10 mA cm−2 at overpotentials of 61 mV for hydrogen evolution reaction (HER) and 296 mV for oxygen evolution reaction (OER) in alkaline electrolyte with Tafel slopes of 87.5 and 52.4 mV dec−1, respectively. The electrode can sustain the HER at an overpotential of 100 mV for 24 h and OER for 1000 cyclic voltammetry cycles with negligible degradation. Density function theory calculations demonstrate that the boron-rich surface possesses appropriate binding energy for chemisorption and desorption of hydrogen-containing intermediates, thus favoring the HER process. The excellent OER activity of FeB2 is ascribed to the formation of a FeOOH/FeB2 heterojunction during water oxidation. An alkaline electrolyzer is constructed using two identical FeB2-NF electrodes as both anode and cathode, which can achieve a current density of 10 mA cm−2 at 1.57 V for overall water splitting with a faradaic efficiency of nearly 100%, rivalling the integrated state-of-the-art Pt/C and RuO2/C.

326 citations

Journal ArticleDOI
TL;DR: In this paper, a new phototransistor based on the mechanically-exfoliated single-layer MoS2 nanosheet is fabricated and its light-induced electric properties are investigated in details.
Abstract: A new phototransistor based on the mechanically-exfoliated single-layer MoS2 nanosheet is fabricated and its light-induced electric properties are investigated in details. Photocurrent generated from the phototransistor is solely determined by the illuminated optical power at a constant drain or gate voltage. The switching behavior of photocurrent generation and annihilation can be completely finished within ca. 50 ms and it shows good stability. Especially, the single-layer MoS2 phototransistor exhibits a better photoresponsivity as compared with the graphene-based device. The unique characteristics of incident-light control, prompt photoswitching and good photoresponsivity from the MoS2 phototransistor pave an avenue to develop the single-layer semiconducting materials for multi-functional optoelectronic device applications in future.

299 citations

Journal ArticleDOI
TL;DR: In this article, an overview of the most widely used cathode buffer layers (CBLs) constructed using pristine zinc oxide (ZnO), doped ZnO, and znO-based composites as well as the surface modified zinc oxide-based CBLs for the improvement of power conversion efficiency and long-term device stability of inverted polymer solar cells (PSCs).
Abstract: This article provides an overview of the design, fabrication and characterization of the most widely used cathode buffer layers (CBLs) constructed using pristine zinc oxide (ZnO), doped-ZnO, and ZnO-based composites as well as the surface modified ZnO-based CBLs for the improvement of power conversion efficiency (PCE) and long-term device stability of inverted polymer solar cells (PSCs). To achieve high PCE in inverted PSCs, the selection of an appropriate material to form high quality CBLs so as to optimize the electron collection and transport is particularly important. ZnO has been the most extensively studied material for CBL of inverted PSCs in view of its relatively high electron mobility, optical transparency, ease of being synthesized with low cost solution methods at low temperature, versatile morphologies, and being environmentally stable. It is pointed out in this review that the electronic processes at the interface between the ZnO CBL and polymer active layer play an important role in determining the solar cells performance. This review attempts to deliver better understanding with regard of the impacts of (1) morphology, (2) thickness, (3) nanostructures, (4) doping, (5) surface modification and (6) composition/hybrids of ZnO CBLs on the inverted PSCs performance. Well understanding the interfacial processes in PSCs is believed also a benefit to the emerging perovskite solar cells in view of their similar energy levels and device structures.

272 citations

Journal ArticleDOI
TL;DR: Density functional theory calculation results indicate that the desorption of OH* from cobalt sites is the rate-limiting step for both CoP and Co2 P in ORR and that the high content of phosphide can lower the reaction barrier.
Abstract: Highly efficient and stable electrocatalysts, particularly those that are capable of multifunctionality in the same electrolyte, are in high demand for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). In this work, highly monodisperse CoP and Co2 P nanocrystals (NCs) are synthesized using a robust solution-phase method. The highly exposed (211) crystal plane and abundant surface phosphide atoms make the CoP NCs efficient catalysts toward ORR and HER, while metal-rich Co2 P NCs show higher OER performance owing to easier formation of plentiful Co2 P@COOH heterojunctions. Density functional theory calculation results indicate that the desorption of OH* from cobalt sites is the rate-limiting step for both CoP and Co2 P in ORR and that the high content of phosphide can lower the reaction barrier. A water electrolyzer constructed with a CoP NC cathode and a Co2 P NC anode can achieve a current density of 10 mA cm-2 at 1.56 V, comparable even to the noble metal-based Pt/C and RuO2 /C pair. Furthermore, the CoP NCs are employed as an air cathode in a primary zinc-air battery, exhibiting a high power density of 62 mW cm-2 and good stability.

263 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: This work reviews the historical development of Transition metal dichalcogenides, methods for preparing atomically thin layers, their electronic and optical properties, and prospects for future advances in electronics and optoelectronics.
Abstract: Single-layer metal dichalcogenides are two-dimensional semiconductors that present strong potential for electronic and sensing applications complementary to that of graphene.

13,348 citations

Journal ArticleDOI
TL;DR: This Review describes how the tunable electronic structure of TMDs makes them attractive for a variety of applications, as well as electrically active materials in opto-electronics.
Abstract: Ultrathin two-dimensional nanosheets of layered transition metal dichalcogenides (TMDs) are fundamentally and technologically intriguing. In contrast to the graphene sheet, they are chemically versatile. Mono- or few-layered TMDs - obtained either through exfoliation of bulk materials or bottom-up syntheses - are direct-gap semiconductors whose bandgap energy, as well as carrier type (n- or p-type), varies between compounds depending on their composition, structure and dimensionality. In this Review, we describe how the tunable electronic structure of TMDs makes them attractive for a variety of applications. They have been investigated as chemically active electrocatalysts for hydrogen evolution and hydrosulfurization, as well as electrically active materials in opto-electronics. Their morphologies and properties are also useful for energy storage applications such as electrodes for Li-ion batteries and supercapacitors.

7,903 citations

Journal ArticleDOI
TL;DR: Ultraensitive monolayer MoS2 phototransistors with improved device mobility and ON current are demonstrated, showing important potential for applications in MoS 2-based integrated optoelectronic circuits, light sensing, biomedical imaging, video recording and spectroscopy.
Abstract: A very sensitive photodector based on molybdenum disulphide with potential for integrated optoelectronic circuits, light sensing, biomedical imaging, video recording or spectroscopy is now demonstrated.

4,212 citations

Journal ArticleDOI
26 Mar 2013-ACS Nano
TL;DR: The properties and advantages of single-, few-, and many-layer 2D materials in field-effect transistors, spin- and valley-tronics, thermoelectrics, and topological insulators, among many other applications are highlighted.
Abstract: Graphene’s success has shown that it is possible to create stable, single and few-atom-thick layers of van der Waals materials, and also that these materials can exhibit fascinating and technologically useful properties. Here we review the state-of-the-art of 2D materials beyond graphene. Initially, we will outline the different chemical classes of 2D materials and discuss the various strategies to prepare single-layer, few-layer, and multilayer assembly materials in solution, on substrates, and on the wafer scale. Additionally, we present an experimental guide for identifying and characterizing single-layer-thick materials, as well as outlining emerging techniques that yield both local and global information. We describe the differences that occur in the electronic structure between the bulk and the single layer and discuss various methods of tuning their electronic properties by manipulating the surface. Finally, we highlight the properties and advantages of single-, few-, and many-layer 2D materials in...

4,123 citations

Journal ArticleDOI

3,711 citations