Lingxia Zhang

Bio: Lingxia Zhang is an academic researcher from Chinese Academy of Sciences. The author has contributed to research in topics: Mesoporous silica & Mesoporous material. The author has an hindex of 55, co-authored 158 publications receiving 10127 citations. Previous affiliations of Lingxia Zhang include Nagoya Institute of Technology & Lucideon.

Fabrication of uniform magnetic nanocomposite spheres with a magnetic core/mesoporous silica shell structure.

Abstract: A novel kind of magnetic core/mesoporous silica shell nanospheres with a uniform particle diameter of ca. 270 nm was synthesized. The inner magnetic core endues the whole nanoparticle with magnetic properties, while the outer mesoporous silica shell shows high enough surface area and pore volume. The synthesized material is expected to be applied to targeted drug delivery and multiphase separation. The storage and release of ibuprofen into and from the pore channels of the mesoporous silica shell, as a typical example, are demonstrated.

Brand new P-doped g-C3N4: enhanced photocatalytic activity for H2 evolution and Rhodamine B degradation under visible light

Abstract: P-doped g-C3N4 has been successfully synthesized using hexachlorocyclotriphosphazene, a low cost and environmentally benign compound, as phosphorus source, and guanidiniumhydrochloride as g-C3N4 precursor, via a thermally induced copolymerization route. The obtained P-doped g-C3N4 showed excellent photocatalytic performance both in the photoreduction of H2O to produce H2 and the photodegradation of Rhodamine B (RhB). H2 evolution rate on modified g-C3N4 reached 50.6 μmol h−1, which is 2.9 times higher than that of the pure g-C3N4. RhB (10 mg L−1) was completely photodegraded within 10 min. The structure and texture properties of the P-doped g-C3N4 have been investigated in detail by XRD, FTIR, TEM, EDS and STEM. With the results of XPS and 31P NMR, a possible existing form of P atom in the framework g-C3N4 has been put forward. The introduction of a P atom significantly changes the electronic property of g-C3N4 and suppresses the recombination of photogenerated charge carriers, thus improving its photocatalytic performance.

Highly selective CO2 photoreduction to CO over g-C3N4/Bi2WO6 composites under visible light

Abstract: CO2 is highly stable and therefore extremely difficult to be reduced at room temperature even by photocatalysis. Herein, a series of g-C3N4/Bi2WO6 composites have been synthesized through a facile in situ hydrothermal approach, which demonstrated greatly enhanced response to visible light, and consequently a remarkably enhanced CO2 selective photoreduction to CO. The g-C3N4 content and synthesis parameters of these composites have been tuned to obtain the optimized photocatalytic activity with a peak CO production rate of 5.19 μmol g−1 h−1 under visible light irradiation at room temperature, which was 22 and 6.4 times that on pure g-C3N4 and Bi2WO6, respectively. Based on the matched band energy potentials between g-C3N4 and Bi2WO6 in the synthesized composites, a possible Z-scheme mechanism, which features a significantly promoted separation of photo-generated carriers under visible light irradiation by the composites, has been proposed to account for the distinctive CO2 photoreduction performance.

Magnetic nanoparticles: Synthesis, protection, functionalization, and application

Abstract: This review focuses on the synthesis, protection, functionalization, and application of magnetic nanoparticles, as well as the magnetic properties of nanostructured systems. Substantial progress in the size and shape control of magnetic nanoparticles has been made by developing methods such as co-precipitation, thermal decomposition and/or reduction, micelle synthesis, and hydrothermal synthesis. A major challenge still is protection against corrosion, and therefore suitable protection strategies will be emphasized, for example, surfactant/polymer coating, silica coating and carbon coating of magnetic nanoparticles or embedding them in a matrix/support. Properly protected magnetic nanoparticles can be used as building blocks for the fabrication of various functional systems, and their application in catalysis and biotechnology will be briefly reviewed. Finally, some future trends and perspectives in these research areas will be outlined.

Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?

Abstract: As a fascinating conjugated polymer, graphitic carbon nitride (g-C3N4) has become a new research hotspot and drawn broad interdisciplinary attention as a metal-free and visible-light-responsive photocatalyst in the arena of solar energy conversion and environmental remediation. This is due to its appealing electronic band structure, high physicochemical stability, and “earth-abundant” nature. This critical review summarizes a panorama of the latest progress related to the design and construction of pristine g-C3N4 and g-C3N4-based nanocomposites, including (1) nanoarchitecture design of bare g-C3N4, such as hard and soft templating approaches, supramolecular preorganization assembly, exfoliation, and template-free synthesis routes, (2) functionalization of g-C3N4 at an atomic level (elemental doping) and molecular level (copolymerization), and (3) modification of g-C3N4 with well-matched energy levels of another semiconductor or a metal as a cocatalyst to form heterojunction nanostructures. The constructi...

Recent Advances in Electrocatalysts for Oxygen Reduction Reaction

Abstract: The recent advances in electrocatalysis for oxygen reduction reaction (ORR) for proton exchange membrane fuel cells (PEMFCs) are thoroughly reviewed. This comprehensive Review focuses on the low- and non-platinum electrocatalysts including advanced platinum alloys, core–shell structures, palladium-based catalysts, metal oxides and chalcogenides, carbon-based non-noble metal catalysts, and metal-free catalysts. The recent development of ORR electrocatalysts with novel structures and compositions is highlighted. The understandings of the correlation between the activity and the shape, size, composition, and synthesis method are summarized. For the carbon-based materials, their performance and stability in fuel cells and comparisons with those of platinum are documented. The research directions as well as perspectives on the further development of more active and less expensive electrocatalysts are provided.

Silica-based mesoporous organic-inorganic hybrid materials.

Abstract: Mesoporous organic-inorganic hybrid materials, a new class of materials characterized by large specific surface areas and pore sizes between 2 and 15 nm, have been obtained through the coupling of inorganic and organic components by template synthesis. The incorporation of functionalities can be achieved in three ways: by subsequent attachment of organic components onto a pure silica matrix (grafting), by simultaneous reaction of condensable inorganic silica species and silylated organic compounds (co-condensation, one-pot synthesis), and by the use of bissilylated organic precursors that lead to periodic mesoporous organosilicas (PMOs). This Review gives an overview of the preparation, properties, and potential applications of these materials in the areas of catalysis, sorption, chromatography, and the construction of systems for controlled release of active compounds, as well as molecular switches, with the main focus being on PMOs.