scispace - formally typeset
Search or ask a question
Author

Linwei Yue

Other affiliations: Wuhan University
Bio: Linwei Yue is an academic researcher from China University of Geosciences (Wuhan). The author has contributed to research in topics: Terrain & Digital elevation model. The author has an hindex of 10, co-authored 25 publications receiving 653 citations. Previous affiliations of Linwei Yue include Wuhan University.

Papers
More filters
Journal ArticleDOI
TL;DR: A method based on a deep convolutional generative adversarial network (DCGAN) to address the problem of DEM void filling and can obtain results with good visual perception and reconstruction accuracy, and is superior to classical interpolation methods.
Abstract: Digital elevation models (DEMs) are an important information source for spatial modeling. However, data voids, which commonly exist in regions with rugged topography, result in incomplete DEM products, and thus significantly degrade DEM data quality. Interpolation methods are commonly used to fill voids of small sizes. For large-scale voids, multi-source fusion is an effective solution. Nevertheless, high-quality auxiliary source information is always difficult to retrieve in rugged mountainous areas. Thus, the void filling task is still a challenge. In this paper, we proposed a method based on a deep convolutional generative adversarial network (DCGAN) to address the problem of DEM void filling. A terrain texture generation model (TTGM) was constructed based on the DCGAN framework. Elevation, terrain slope, and relief degree composed the samples in the training set to better depict the terrain textural features of the DEM data. Moreover, the resize-convolution was utilized to replace the traditional deconvolution process to overcome the staircase in the generated data. The TTGM was trained on non-void SRTM (Shuttle Radar Topography Mission) 1-arc-second data patches in mountainous regions collected across the globe. Then, information neighboring the voids was involved in order to infer the latent encoding for the missing areas approximated to the distribution of training data. This was implemented with a loss function composed of pixel-wise, contextual, and perceptual constraints during the reconstruction process. The most appropriate fill surface generated by the TTGM was then employed to fill the voids, and Poisson blending was performed as a postprocessing step. Two models with different input sizes (64 × 64 and 128 × 128 pixels) were trained, so the proposed method can efficiently adapt to different sizes of voids. The experimental results indicate that the proposed method can obtain results with good visual perception and reconstruction accuracy, and is superior to classical interpolation methods.

11 citations

Proceedings ArticleDOI
Linwei Yue1, Wei Yu1, Huanfeng Shen1, Liangpei Zhang1, Yuanqing He1 
26 Jul 2015
TL;DR: The results revealed their levels of reliability for applied glaciology and hydrology in the typical snow mountain area and their relationship between error distribution in elevation and mountainous hypsography based on data causes.
Abstract: As a significant digital representation of terrain surface, varieties of DEM products have been available to the public. The most widely used global DEM products are SRTM and ASTER GDEM. Given the comparable horizontal resolution and vertical error, accuracy validation and comparison have been of interest since the release, however, usually on a wide range. In this paper, we presented the results of accuracy assessment for ASTER GDEM v2 and SRTM v4.1 in Yulong Mountain, Yunnan province, China. Topographic map was chosen as the benchmark. The results and discussions were centered on the relationship between error distribution in elevation and mountainous hypsography based on data causes. The results revealed their levels of reliability for applied glaciology and hydrology in the typical snow mountain area.

10 citations

Journal ArticleDOI
27 Nov 2019-Sensors
TL;DR: The experimental results show that both the number of matching pairs and the matching precision for the distorted building images can be significantly improved while using the proposed distorted image matching method.
Abstract: Building image-matching plays a critical role in the urban applications. However, finding reliable and sufficient feature correspondences between the real-world urban building images that were captured in widely separate views are still challenging. In this paper, we propose a distorted image matching method combining the idea of viewpoint rectification and fusion. Firstly, the distorted images are rectified to the standard view with the transform invariant low-rank textures (TILT) algorithm. A local symmetry feature graph is extracted from the building images, followed by multi-level clustering using the mean shift algorithm, to automatically detect the low-rank texture region. After the viewpoint rectification, the Oriented FAST and Rotated BRIEF (ORB) feature is used to match the images. The grid-based motion statistics (GMS) and RANSAC techniques are introduced to remove the outliers and preserve the correct matching points to deal with the mismatched pairs. Finally, the matching results for the rectified views are projected to the original viewpoint space, and the matches before and after distortion rectification are fused to further determine the final matches. The experimental results show that both the number of matching pairs and the matching precision for the distorted building images can be significantly improved while using the proposed method.

10 citations

Posted Content
TL;DR: In this paper, the relationship between PM2.5 and AOD was investigated in 368 cities in China for a continuous period from February 2013 to December 2017, at different time and regional scales.
Abstract: Satellite aerosol products have been widely used to retrieve ground PM2.5 concentration because of its wide coverage and continuously spatial distribution. While more and more studies focus on the retrieval algorithm, we find that the relationship between PM2.5 concentration and satellite AOD has not been fully discussed in China. Is satellite AOD always a good indicator for PM2.5 in different regions and can AOD still be employed to retrieve PM2.5 with pollution conditions changing in these years remain unclear. In this study, the relationships between PM2.5 and AOD were investigated in 368 cities in China for a continuous period from February 2013 to December 2017, at different time and regional scales. Pearson correlation coefficients and PM2.5/AOD ratio were used as the indicator. Firstly, we concluded the relationship of PM2.5 and AOD in terms of spatiotemporal variations. Then the impact of meteorological factors, aerosol size and topography were discussed. Finally, a GWR retrieval experiment was conducted to find out how was the retrieval accuracy changing with the varying of PM2.5-AOD relationship. We found that spatially the correlation is higher in Beijing-Tianjin-Hebei and Chengyu region and weaker in coastal areas such as Yangtze River Delta and Pearl River Delta. The PM2.5/AOD ratio has obvious North-South difference with a high ratio in north China and a lower ratio in south China. Temporally, PM2.5/AOD ratio is higher in winter and lower in summer, the correlation coefficient tends to be higher in May and September. As for interannual variations from 2013 to 2017, we detected a declining tendency on PM2.5/AOD ratio. The accuracy of GWR retrievals were decreasing too, which may imply that AOD may not be a good indicator for PM2.5 in the future.

10 citations

Journal ArticleDOI
TL;DR: The factor analysis indicated that most of the lakes had maintained a steady or slightly changing tendency because the glacial melting water was counteracted by the negative impact of high evapotranspiration amount, which mainly dominated the overall decreasing trend of lake water storage in the Altai Mountains.
Abstract: Estimating lake dynamics is vital for the accurate evaluation of climate change and water resources monitoring. However, it remains a challenge to estimate the lake mass budget due to extremely scarce in situ data, especially for alpine regions. In this article, multimission remote sensing observations were blended to examine recent lake variations and their responses to climate change around the Altai Mountains during 2001–2009 and 2010–1018. First, the multitemporal Landsat images were used to enable the detailed monitoring of the surface extent of 43 lakes (> 5 km2) around the Altai Mountains from 2001 to 2018. The results presented that the total lake surface extent shrunk from 9835 km2 in 2001 to a minimum of 9652 km2 in 2009, while subsequently rose to 9714 km2 in 2018. By combining the lake area with the water level derived from the ICESat and CryoSat-2 altimetry data, the water storage of seven lakes covering ∼84% of the overall lake area in the region was obtained. The total water storage was detected with a decrease of 4.86 ± 1.17 km3 from 2003 to 2009 and a decrease of 3.65 ± 1.16 km3 from 2010 to 2018, respectively. Although most of the glaciers in this region had a significant mass loss in the past decades, the factor analysis indicated that most of the lakes had maintained a steady or slightly changing tendency because the glacial melting water was counteracted by the negative impact of high evapotranspiration amount. For the lakes with a few glacier melting supplies, e.g., the Uvs lake and Hyargas lake, the significant water budget loss was caused by the increasing evapotranspiration, decreased precipitation, and developed animal husbandry, which mainly dominated the overall decreasing trend of lake water storage in the Altai Mountains.

9 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this article, the authors provide a short overview of recent advances and some associated challenges in machine learning applied to medical image processing and image analysis, and provide a starting point for people interested in experimenting and perhaps contributing to the field of machine learning for medical imaging.
Abstract: What has happened in machine learning lately, and what does it mean for the future of medical image analysis? Machine learning has witnessed a tremendous amount of attention over the last few years. The current boom started around 2009 when so-called deep artificial neural networks began outperforming other established models on a number of important benchmarks. Deep neural networks are now the state-of-the-art machine learning models across a variety of areas, from image analysis to natural language processing, and widely deployed in academia and industry. These developments have a huge potential for medical imaging technology, medical data analysis, medical diagnostics and healthcare in general, slowly being realized. We provide a short overview of recent advances and some associated challenges in machine learning applied to medical image processing and image analysis. As this has become a very broad and fast expanding field we will not survey the entire landscape of applications, but put particular focus on deep learning in MRI. Our aim is threefold: (i) give a brief introduction to deep learning with pointers to core references; (ii) indicate how deep learning has been applied to the entire MRI processing chain, from acquisition to image retrieval, from segmentation to disease prediction; (iii) provide a starting point for people interested in experimenting and perhaps contributing to the field of machine learning for medical imaging by pointing out good educational resources, state-of-the-art open-source code, and interesting sources of data and problems related medical imaging.

991 citations

01 Jan 2011
TL;DR: The GMTED2010 layer extents (minimum and maximum latitude and longitude) are a result of the coordinate system inherited from the 1-arcsecond SRTM.
Abstract: For more information on the USGS—the Federal source for science about the Earth, its natural and living resources, natural hazards, and the environment, visit http://www.usgs.gov or call 1–888–ASK–USGS. For an overview of USGS information products, including maps, imagery, and publications, Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although this report is in the public domain, permission must be secured from the individual copyright owners to reproduce any copyrighted materials contained within this report. 10. Diagram showing the GMTED2010 layer extents (minimum and maximum latitude and longitude) are a result of the coordinate system inherited from the 1-arc-second SRTM

802 citations

Journal ArticleDOI
TL;DR: This paper indicates how deep learning has been applied to the entire MRI processing chain, from acquisition to image retrieval, from segmentation to disease prediction, and provides a starting point for people interested in experimenting and contributing to the field of deep learning for medical imaging.
Abstract: What has happened in machine learning lately, and what does it mean for the future of medical image analysis? Machine learning has witnessed a tremendous amount of attention over the last few years. The current boom started around 2009 when so-called deep artificial neural networks began outperforming other established models on a number of important benchmarks. Deep neural networks are now the state-of-the-art machine learning models across a variety of areas, from image analysis to natural language processing, and widely deployed in academia and industry. These developments have a huge potential for medical imaging technology, medical data analysis, medical diagnostics and healthcare in general, slowly being realized. We provide a short overview of recent advances and some associated challenges in machine learning applied to medical image processing and image analysis. As this has become a very broad and fast expanding field we will not survey the entire landscape of applications, but put particular focus on deep learning in MRI. Our aim is threefold: (i) give a brief introduction to deep learning with pointers to core references; (ii) indicate how deep learning has been applied to the entire MRI processing chain, from acquisition to image retrieval, from segmentation to disease prediction; (iii) provide a starting point for people interested in experimenting and perhaps contributing to the field of deep learning for medical imaging by pointing out good educational resources, state-of-the-art open-source code, and interesting sources of data and problems related medical imaging.

590 citations

01 Apr 2013
TL;DR: In this paper, the authors estimated the groundwater depletion rate in North China based on GRACE data and ground-based measurements collected from 2003 to 2010, which is equivalent to a volume of 8.3 km3/yr.
Abstract: [1] Changes in regional groundwater storage in North China were estimated from the Gravity Recovery and Climate Experiment (GRACE) satellites data and ground-based measurements collected from 2003 to 2010. The study area (∼370,000 km2) included the Beijing and Tianjin municipality, the Hebei and Shanxi province, which is one of the largest irrigation areas in the world and is subjected to intensive groundwater-based irrigation. Groundwater depletion in North China was estimated by removing the simulated soil moisture changes from the GRACE-derived terrestrial water storage changes. The rate of groundwater depletion in North China based on GRACE was 2.2 ± 0.3 cm/yr from 2003 to 2010, which is equivalent to a volume of 8.3 ± 1.1 km3/yr. The groundwater depletion rate estimated from monitoring well stations during the same time period was between 2.0 and 2.8 cm/yr, which is consistent with the GRACE-based result. However, the estimated groundwater depletion rate in shallow plain aquifers according to the Groundwater Bulletin of China Northern Plains (GBCNP) for the same time period was only approximately 2.5 km3/yr. The difference in groundwater depletion rates estimated from GRACE and GBCNP data indicates the important contribution of groundwater depletion from deep aquifers in the plain and piedmont regions of North China.

453 citations