Many metal–insulator–metal systems show electrically induced resistive switching effects and have therefore been proposed as the basis for future non-volatile memories. They combine the advantages of Flash and DRAM (dynamic random access memories) while avoiding their drawbacks, and they might be highly scalable. Here we propose a coarse-grained classification into primarily thermal, electrical or ion-migration-induced switching mechanisms. The ion-migration effects are coupled to redox processes which cause the change in resistance. They are subdivided into cation-migration cells, based on the electrochemical growth and dissolution of metallic filaments, and anion-migration cells, typically realized with transition metal oxides as the insulator, in which electronically conducting paths of sub-oxides are formed and removed by local redox processes. From this insight, we take a brief look into molecular switching systems. Finally, we discuss chip architecture and scaling issues.

http://chialvo.org/Curso/UBACurso/DIA7/Papers/Aono_NatMat_07_Ionic%20Switching%20Memory.pdf

Nanoionics-based resistive switching memories

Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges

Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each. Their size ranges from 2-3 to about 20 nm. What is special about this size regime that placed NCs among the hottest research topics of the last decades? The quantum mechanical coupling * To whom correspondence should be addressed. E-mail: dvtalapin@uchicago.edu. † The University of Chicago. ‡ Argonne National Lab. Chem. Rev. 2010, 110, 389–458 389

/pdf/prospects-of-colloidal-nanocrystals-for-electronic-and-3dxpyhl3r7.pdf

Prospects of Colloidal Nanocrystals for Electronic and Optoelectronic Applications

Memristive devices are electrical resistance switches that can retain a state of internal resistance based on the history of applied voltage and current. These devices can store and process information, and offer several key performance characteristics that exceed conventional integrated circuit technology. An important class of memristive devices are two-terminal resistance switches based on ionic motion, which are built from a simple conductor/insulator/conductor thin-film stack. These devices were originally conceived in the late 1960s and recent progress has led to fast, low-energy, high-endurance devices that can be scaled down to less than 10 nm and stacked in three dimensions. However, the underlying device mechanisms remain unclear, which is a significant barrier to their widespread application. Here, we review recent progress in the development and understanding of memristive devices. We also examine the performance requirements for computing with memristive devices and detail how the outstanding challenges could be met.

Memristive devices for computing

Resistive switching in transition metal oxides

Building on the success of organic electronic devices, such as light-emitting diodes and field-effect transistors, procedures for fabricating non-volatile organic memory devices are now being explored. Here, we demonstrate a novel organic memory device fabricated by solution processing. Programmable electrical bistability was observed in a device made from a polystyrene film containing gold nanoparticles and 8-hydroxyquinoline sandwiched between two metal electrodes. The as-prepared device, which is in a low-conductivity state, displays an abrupt transition to a high-conductivity state under an external bias of 2.8 V. These two states differ in conductivity by about four orders of magnitude. Applying a negative bias of 1.8 V causes the device to return to the low-conductivity state. The electronic transition is attributed to the electric-field-induced charge transfer between the gold nanoparticles and 8-hydroxyquinoline. The transition from the low- to the high-conductivity state takes place in nanoseconds, and is non-volatile, indicating that the device may be used for low-cost, high-density memory storage.

Programmable polymer thin film and non-volatile memory device.

Recently, films created by incorporating metallic nanoparticles into organic or polymeric materials have demonstrated electrical bistability, as well as the memory effect, when subjected to an electrical bias. Organic and polymeric digital memory devices based on this bistable electronic behavior have emerged as a viable technology in the field of organic electronics. These devices exhibit fast response speeds and can form multiple-layer stacking structures, demonstrating that organic memory devices possess a high potential to become flexible, ultrafast, and ultrahigh-density memory devices. This behavior is believed to be related to charge storage in the organic or polymer film, where devices are able to exhibit two different states of conductivity often separated by several orders of magnitude. By defining the two states as “1” and “0”, it is now possible to create digital memory devices with this technology. This article reviews electrically bistable devices developed in our laboratory. Our research has stimulated strong interest in this area worldwide. The research by other laboratories is reviewed as well.

/pdf/electrical-switching-and-bistability-in-organic-polymeric-2v12vfkf1h.pdf

Electrical Switching and Bistability in Organic/Polymeric Thin Films and Memory Devices

Nanostructured viruses are attractive for use as templates for ordering quantum dots to make self-assembled building blocks for next-generation electronic devices. So far, only a few types of electronic devices have been fabricated from biomolecules due to the lack of charge transport through biomolecular junctions. Here, we show a novel electronic memory effect by incorporating platinum nanoparticles into tobacco mosaic virus. The memory effect is based on conductance switching, which leads to the occurrence of bistable states with an on/off ratio larger than three orders of magnitude. The mechanism of this process is attributed to charge trapping in the nanoparticles for data storage and a tunnelling process in the high conductance state. Such hybrid bio-inorganic nanostructures show promise for applications in future nanoelectronics.

https://yylab.seas.ucla.edu/papers/Nat%20Nanotech%20V1p72%202006.pdf

Digital memory device based on tobacco mosaic virus conjugated with nanoparticles

Two-terminal electrical bistable devices have been fabricated using a sandwich structure of organic/metal/organic as the active medium, sandwiched between two external electrodes. The nonvolatile electrical bistability of these devices can be controlled using a positive and a negative electrical bias alternatively. A forward bias may switch the device to a high-conductance state, while a reverse bias is required to restore it to a low-conductance state. In this letter, a model to explain this electrical bistability is proposed. It is found that the bistability is very sensitive to the nanostructure of the middle metal layer. For obtaining the devices with well-controlled bistability, the middle metal layer is incorporated with metal nanoclusters separated by thin oxide layers. These nanoclusters behave as the charge storage elements, which enable the nonvolatile electrical bistability when biased to a sufficiently high voltage. This mechanism is supported by the experimental data obtained from UV–visible ...

Nonvolatile electrical bistability of organic/metal-nanocluster/organic system

We report an organic transistor with a vertically stack structure, which consists of a layer-by-layer active cell (drain/organics/source) on top of a capacitor cell (source/dielectrics/gate); the middle source electrode is shared by the capacitor cell and active cell. Three unique characteristics of this transistor, (a) its very thin and rough middle source electrode; (b) its capacitor cell with high charge-storage capability, allow the active cell to be influenced when the gate is biased; and (c) the large cross-section area and small distance between the source and the drain allow current flowing between the source and drain electrodes. Devices have been fabricated by thermal evaporation with the source-drain current well modulated by the gate potential. We have achieved organic transistors with low working voltage (less than 5V) and high current output (up to 10mA or 4A∕cm2) and an ON/OFF ratio of 4×106. A model is proposed for the device operation mechanism. The demonstrated device with its enhanced operating characteristics may open directions for organic transistors and their applications.

/pdf/unique-architecture-and-concept-for-high-performance-organic-x7trk0bu3f.pdf

Liping Ma

Papers

Programmable polymer thin film and non-volatile memory device.

Electrical Switching and Bistability in Organic/Polymeric Thin Films and Memory Devices

Digital memory device based on tobacco mosaic virus conjugated with nanoparticles

Nonvolatile electrical bistability of organic/metal-nanocluster/organic system

Unique architecture and concept for high-performance organic transistors