scispace - formally typeset
Search or ask a question
Author

Liqiang Huang

Other affiliations: Nanchang University
Bio: Liqiang Huang is an academic researcher from Tongji University. The author has contributed to research in topics: Polymer solar cell & Organic solar cell. The author has an hindex of 17, co-authored 34 publications receiving 661 citations. Previous affiliations of Liqiang Huang include Nanchang University.

Papers
More filters
Journal ArticleDOI
TL;DR: An additive-engineering strategy is employed to modify the grain boundary (GB) defects and crystal lattice defects by introducing a strong electron acceptor of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) into perovskite functional layer, which shows excellent device performance.
Abstract: Solar cells based on hybrid organic–inorganic metal halide perovskites are being developed to achieve high efficiency and stability. However, inevitably, there are defects in perovskite films, leading to poor device performance. Here, we employ an additive-engineering strategy to modify the grain boundary (GB) defects and crystal lattice defects by introducing a strong electron acceptor of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) into perovskite functional layer. Importantly, it has been found that F4TCNQ is filled in GBs and there is a significant reduction of metallic lead defects and iodide vacancies in the perovskite crystal lattice. The bulk heterojunction perovskite–F4TCNQ film exhibits superior electronic quality with improved charge separation and transfer, enhanced and balanced charge mobility, as well as suppressed recombination. As a result, the F4TCNQ doped perovskite device shows excellent device performance, especially the reproducible high fill factor (up to 80%) and ne...

113 citations

Journal ArticleDOI
02 Dec 2019-ACS Nano
TL;DR: A strategy to effectively improve the adhesiveness of Li metal to garnet-type SSE is proposed by adding only a few two-dimensional boron nitride nanosheets into Li metal by triggering the transition from point contact to complete adhesion between Li metal and ceramic SSE.
Abstract: Solid-state lithium metal batteries (SSLMBs) are promising energy storage devices by employing lithium metal anodes and solid-state electrolytes (SSEs) to offer high energy density and high safety. However, their efficiency is limited by Li metal/SSE interface barriers, including insufficient contact area and chemical/electrochemical incompatibility. Herein, a strategy to effectively improve the adhesiveness of Li metal to garnet-type SSE is proposed by adding only a few two-dimensional boron nitride nanosheets (BNNS) (5 wt %) into Li metal by triggering the transition from point contact to complete adhesion between Li metal and ceramic SSE. The interface between the Li-BNNS composite anode and the garnet exhibits a low interfacial resistance of 9 Ω cm2, which is significantly lower than that of bare Li/garnet interface (560 Ω cm2). Furthermore, the enhanced contact and the additional BNNS in the interface act synergistically to offer a high critical current density of 1.5 mA/cm2 and a stable electrochemical plating/striping over 380 h. Moreover, the full cell paired with the Li-BNNS composite anode and the LiFePO4 cathode shows stable cycling performance at room temperature. Our results introduce an appealing composite strategy with two-dimensional materials to overcome the interface challenges, which provide more opportunities for the development of SSLMBs.

104 citations

Journal ArticleDOI
09 Sep 2021-Chem
TL;DR: In this paper, the critical effects brought by the electrolyte recipes in stabilizing Li/Na metal batteries are identified and elucidated, based on a thorough discussion on these effects, they propose strategies that should be taken further.

101 citations

Journal ArticleDOI
20 Apr 2018-ACS Nano
TL;DR: A connection is established between the material surface energy, absorption, and vertical stratification, which can then be linked to photovoltaic conversion characteristics and synchronized enhancement in external quantum efficiency and power conversion efficiencies over 10.5%.
Abstract: High-efficiency organic solar cells (OSCs) can be produced through optimization of component molecular design, coupled with interfacial engineering and control of active layer morphology. However, vertical stratification of the bulk-heterojunction (BHJ), a spontaneous activity that occurs during the drying process, remains an intricate problem yet to be solved. Routes toward regulating the vertical separation profile and evaluating the effects on the final device should be explored to further enhance the performance of OSCs. Herein, we establish a connection between the material surface energy, absorption, and vertical stratification, which can then be linked to photovoltaic conversion characteristics. Through assessing the performance of temporary, artificial vertically stratified layers created by the sequential casting of the individual components to form a multilayered structure, optimal vertical stratification can be achieved. Adjusting the surface energy offset between the substrate results in donor...

72 citations

Journal ArticleDOI
TL;DR: The solid-electrolyte interphase (SEI) is known to dictate the performance of a Li metal anode, where its inorganic compositions are primarily responsible for Li+ conduction, electron insulation, a...
Abstract: The solid-electrolyte interphase (SEI) is known to dictate the performance of a Li metal anode, where its inorganic compositions are primarily responsible for Li+ conduction, electron insulation, a...

71 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: The focus herein is on the recombination at perovskite/electron-transporting material and perovSkite/hole-transport material interfaces in normal or inverted PSCs.
Abstract: Organic-inorganic hybrid perovskite materials are receiving increasing attention and becoming star materials on account of their unique and intriguing optical and electrical properties, such as high molar extinction coefficient, wide absorption spectrum, low excitonic binding energy, ambipolar carrier transport property, long carrier diffusion length, and high defects tolerance. Although a high power conversion efficiency (PCE) of up to 22.7% is certified for perovskite solar cells (PSCs), it is still far from the theoretical Shockley-Queisser limit efficiency (30.5%). Obviously, trap-assisted nonradiative (also called Shockley-Read-Hall, SRH) recombination in perovskite films and interface recombination should be mainly responsible for the above efficiency distance. Here, recent research advancements in suppressing bulk SRH recombination and interface recombination are systematically investigated. For reducing SRH recombination in the films, engineering perovskite composition, additives, dimensionality, grain orientation, nonstoichiometric approach, precursor solution, and post-treatment are explored. The focus herein is on the recombination at perovskite/electron-transporting material and perovskite/hole-transporting material interfaces in normal or inverted PSCs. Strategies for suppressing bulk and interface recombination are described. Additionally, the effect of trap-assisted nonradiative recombination on hysteresis and stability of PSCs is discussed. Finally, possible solutions and reasonable prospects for suppressing recombination losses are presented.

384 citations

Journal ArticleDOI
TL;DR: It is demonstrated that incorporating a heterojunction between a donor polymer and non-fullerene acceptor in organic nanoparticles can result in hydrogen evolution photocatalysts with greatly enhanced photocatallytic activity.
Abstract: Photocatalysts formed from a single organic semiconductor typically suffer from inefficient intrinsic charge generation, which leads to low photocatalytic activities. We demonstrate that incorporating a heterojunction between a donor polymer (PTB7-Th) and non-fullerene acceptor (EH-IDTBR) in organic nanoparticles (NPs) can result in hydrogen evolution photocatalysts with greatly enhanced photocatalytic activity. Control of the nanomorphology of these NPs was achieved by varying the stabilizing surfactant employed during NP fabrication, converting it from a core–shell structure to an intermixed donor/acceptor blend and increasing H2 evolution by an order of magnitude. The resulting photocatalysts display an unprecedentedly high H2 evolution rate of over 60,000 µmol h−1 g−1 under 350 to 800 nm illumination, and external quantum efficiencies over 6% in the region of maximum solar photon flux. Photocatalysts formed from a single organic semiconductor can suffer from inefficient charge generation leading to low photocatalytic activities. Incorporating a heterojunction between a donor polymer and non-fullerene acceptor in organic nanoparticles leads to enhanced photocatalytic hydrogen evolution.

308 citations

Journal ArticleDOI
TL;DR: The results prove the feasibility of efficient hole transfer and high efficiency for the PSCs with zero ∆EHOMO(D-A), which is greatly valuable for understanding the charge transfer process and achieving high PCE of the P SCs.
Abstract: Achieving efficient charge transfer at small frontier molecular orbital offsets between donor and acceptor is crucial for high performance polymer solar cells (PSCs). Here we synthesize a new wide band gap polymer donor, PTQ11, and a new low band gap acceptor, TPT10, and report a high power conversion efficiency (PCE) PSC (PCE = 16.32%) based on PTQ11-TPT10 with zero HOMO (the highest occupied molecular orbital) offset (ΔEHOMO(D-A)). TPT10 is a derivative of Y6 with monobromine instead of bifluorine substitution, and possesses upshifted lowest unoccupied molecular orbital energy level (ELUMO) of -3.99 eV and EHOMO of -5.52 eV than Y6. PTQ11 is a derivative of low cost polymer donor PTQ10 with methyl substituent on its quinoxaline unit and shows upshifted EHOMO of -5.52 eV, stronger molecular crystallization, and better hole transport capability in comparison with PTQ10. The PSC based on PTQ11-TPT10 shows highly efficient exciton dissociation and hole transfer, so that it demonstrates a high PCE of 16.32% with a higher Voc of 0.88 V, a large Jsc of 24.79 mA cm-2, and a high FF of 74.8%, despite the zero ΔEHOMO(D-A) value between donor PTQ11 and acceptor TPT10. The PCE of 16.32% is one of the highest efficiencies in the PSCs. The results prove the feasibility of efficient hole transfer and high efficiency for the PSCs with zero ΔEHOMO(D-A), which is highly valuable for understanding the charge transfer process and achieving high PCE of PSCs.

305 citations

Journal ArticleDOI
TL;DR: General strategies to control the oxidation degree of graphene-like materials via two methods: oxidation of graphite by KMnO4 in H2SO4 (oGO), and reduction of highly oxidized GO by hydrazine (rGO).
Abstract: Graphene oxide (GO) is widely recognized as a promising material in a variety of fields, but its structure and composition has yet to be fully controlled. We have developed general strategies to control the oxidation degree of graphene-like materials via two methods: oxidation of graphite by KMnO4 in H2SO4 (oGO) and reduction of highly oxidized GO by hydrazine (rGO). Even though the oxygen content may be the same, oGO and rGO have different properties, for example the adsorption ability, oxidation ability and electron conductivity. These differences in property arise from the difference in the underlying graphitic structure and the type of defect present. Our results can be used as a guideline for the production of tailor-made graphitic carbons. As an example, we show that rGO with 23.1 wt% oxygen showed the best performance as an electrode of an electric double-layer capacitor.

259 citations