scispace - formally typeset
Search or ask a question
Author

Liu Chusheng

Bio: Liu Chusheng is an academic researcher from China University of Mining and Technology. The author has contributed to research in topics: Parallel manipulator & Discrete element method. The author has an hindex of 5, co-authored 15 publications receiving 81 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: In this article, a new large vibrating screen with hyperstatic net-beam structure was presented and the structural size of stiffeners on the side plate was optimized under multiple frequencies constraints and an adaptive optimization criterion was given.

40 citations

Journal ArticleDOI
TL;DR: In this article, a 3D discrete element method (DEM) is used to simulate particle segregation processes in different vibration modes, and the effects of vibration intensity on the segregation pattern of the circular and elliptical modes are analyzed.
Abstract: Particle segregation processes in different vibration modes are simulated based on 3D discrete element method (DEM). The phenomena of wave motion of large particles in upper layer that appears in the segregation processes of linear vibration mode, accumulation and circulation that appear in circular and elliptical vibration mode are analyzed. And the influences of vibration intensity on the segregation pattern of the circular and elliptical mode were also discussed. The results show that the segregation behaviors in different modes can be well explained by a combination of three mechanisms: void filling, sidewall-driven transport of particles and nonequipartition of energy, and the distribution of particle velocity vectors. The vibration intensity has a great effect on the segregation pattern of circular and elliptical mode. For each vibration mode, fine particle segregation effect and stable particle moving state is obtained when the value of vibration intensity is about 3.

17 citations

Journal ArticleDOI
TL;DR: In this paper, the authors analyzed the particle segregation mechanism in view of force, torque and energy conversion between particles and showed that large particles are more active than small ones in segregation process, and non-spherical particles have higher energy.
Abstract: Basing on dry contact model of soft spheres the segregation processes of spherical and non-spherical particles were simulated using threes-dimensional discrete element methods(DEM). Particle segregation mechanism was analyzed in view of force, torque and energy conversion between particles. Influence of segregation speed affected by particle size ratio was also discussed. The result shows that large particles are more active than small ones in segregation process, and non-spherical particles have higher energy, which makes up the influence of particle shape to segregation process to some extent, are more active than spherical particles. Average normal force, tangential force between large particles, their torque and kinetic energy are all greater than those of small particles. Particle segregation speed increases significantly with the increasing of size ratio. When the size ratio is greater than the critical value 3, the amplitude of increase in segregation speed will be slowed down.

11 citations

Journal ArticleDOI
TL;DR: In this article, the effects of particle shape and liquid bridge force between wet particles on the piling form were analyzed and the significant central dip profiles of normal force acting on the base surface, normal force and tangential force between particles were predicted.
Abstract: Discrete element method (DEM) simulations for pile-up processes of different particle systems were performed based on linear cohesion contact model. Effects of particle shape and liquid bridge force between wet particles on the piling form were analyzed. The significant central dip profiles of normal force acting on the base surface, normal force and tangential force between particles were predicted. Effects of particle shape and cohesion energy density on the forces on the base surface and inter-particles were described. The results show that particle shape and the liquid bridge force have significant impacts on the piling form. With the increase of the cohesion energy density the angle of repose for each granular pile increases. But the angle of repose of cubical particles is bigger than that of spherical particles under the same condition. Particle shape and the liquid bridge force also significantly affect the change and the maximum amplitude of the forces acting on the base surface and the forces between the particles. The maximum amplitude of the forces increases with the increase of the cohesion energy density, and the value of the maximum force on cubical particles is bigger than that on spherical particles. When the value of cohesion energy density is very large, the mechanical properties of granular piles become more complicated, so that the liquid bridge force has a larger impact on the packing characteristic of particles than the impact on particle shape.

9 citations

Journal Article
TL;DR: The experimental results in terms of the global optimization efficiency, the solution accuracy and the computation robustness demonstrate that the SFL-DE algorithm is a better tool for solving some benchmark optimization problems within a few fixed generations, but takes a longer run time.
Abstract: Shuffled Leaping Frog Algorithm(SFLA) is characterized by simplicity,few control parameters required,and easily be used,but has the disadvantages of premature convergence and low precision for hard high-dimensional optimization prob- lems,due to its rapid loss of the population diversity and the lack of local refined search abilities at the later stages of generations.In order to overcome the easy premature or early convergence of SFLAs,this paper hybridizes the SFLA and the Differential Evolution(DE) algorithm to form a hybrid optimization algorithm,namely SFL-DE,which borrows the idea from DE/best/1/bin strategy that has the advantages of strong global search ability and better population diversity.Comparisons are presented to test performances of the new algorithm employing 6 benchmark 30-dimensional functions.Compared with SFLA and standard DE(i.e.,DE/best/1/bin and DE/rand/1/bin schemes) algorithms,the experimental results in terms of the global optimization efficiency,the solution accuracy and the computation robustness demonstrate that the SFL-DE algorithm is a better tool for solving some benchmark optimization problems within a few fixed generations,but takes a longer run time.

5 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, the combined effects of vibration parameters on the circularly screening processes are analyzed based on the Taguchi orthogonal experiment method and the corresponding optimal combinations of the three factors for two screening performance indexes are obtained, respectively.

75 citations

Journal ArticleDOI
TL;DR: In this paper, the authors compared DEM results and experimental data from a specially designed circularly vibrating screening model under a range of operating conditions and found better agreement for non-spherical particle model with the particle shape reasonably considered.

58 citations

Journal ArticleDOI
TL;DR: In this article, a numerical study of the motion particulates follow along a circularly vibrating screen deck was done using the three dimensional discrete element method (DEM) and the motion of the particles was analyzed.
Abstract: A numerical study of the motion particulates follow along a circularly vibrating screen deck was done using the three dimensional Discrete Element Method (DEM). The motion of the particles was analyzed. The effects of vibration amplitude, throwing index, and screen deck inclination angle on the screening process are discussed. The results show that the average velocity of the particles increases along the longitudinal direction of the deck. The screening efficiency is highest when the vibration amplitude, throwing index, and screen deck inclination angle are 3–3.5 mm, 2.7 and 15°, respectively. This work is helpful for developing a deep understanding of particle motion and for optimizing screen separator designs.

56 citations

Journal ArticleDOI
TL;DR: This study introduces inertia weight into the Levy flight random search to improve global searching capability and applies the local search mechanism of the frog leaping algorithm to enhance local search and further improve the search speed and convergence precision of the algorithm.

49 citations

Journal ArticleDOI
TL;DR: In this paper, a systematic search of literature published during the last fifteen years was carried out and based on the analysis on these papers, these advanced design techniques and methods were summed up as three issues: the kinetic properties of the screen body by dynamic modeling, the optimal screening operational parameters by discrete element method and the dynamic design of the body by finite element method.

47 citations