Author
Liuyang Zhang
Bio: Liuyang Zhang is an academic researcher from Wuhan University of Technology. The author has contributed to research in topics: Photocatalysis & Graphene. The author has an hindex of 34, co-authored 61 publications receiving 5061 citations.
Topics: Photocatalysis, Graphene, Supercapacitor, Heterojunction, Adsorption
Papers
More filters
TL;DR: In this article, the authors soberly reflect the charge transfer mechanism from many perspectives and are finally aware of the fundamental challenges they face to ensure a correct understanding, it is necessary to share their analysis with others Moreover, step-scheme heterojunctions, consisting of a reduction photocatalyst and an oxidizer with staggered band structure, are introduced to avoid misinterpretation.
1,636 citations
TL;DR: Concluding perspectives on the challenges and opportunities for the further exploration of dual cocatalyst-modified TiO2 photocatalysts are presented.
Abstract: Semiconductor photocatalysis is recognized as a promising strategy to simultaneously address energy needs and environmental pollution. Titanium dioxide (TiO2 ) has been investigated for such applications due to its low cost, nontoxicity, and high chemical stability. However, pristine TiO2 still suffers from low utilization of visible light and high photogenerated-charge-carrier recombination rate. Recently, TiO2 photocatalysts modified by dual cocatalysts with different functions have attracted much attention due to the extended light absorption, enhanced reactant adsorption, and promoted charge-carrier-separation efficiency granted by various cocatalysts. Recent progress on the component and structural design of dual cocatalysts in TiO2 photocatalysts is summarized. Depending on their components, dual cocatalysts decorated on TiO2 photocatalysts can be divided into the following categories: bimetallic cocatalysts, metal-metal oxide/sulfide cocatalysts, metal-graphene cocatalysts, and metal oxide/sulfide-graphene cocatalysts. Depending on their architecture, they can be categorized into randomly deposited binary cocatalysts, facet-dependent selective-deposition binary cocatalysts, and core-shell structural binary cocatalysts. Concluding perspectives on the challenges and opportunities for the further exploration of dual cocatalyst-modified TiO2 photocatalysts are presented.
716 citations
TL;DR: In this article, a ZnO/CdS hierarchical composite was prepared through a hydrothermal and chemical bath deposition (CBD) process and its photocatalytic H2-production performance was tested.
Abstract: Herein, ZnO/CdS hierarchical composite was prepared through a hydrothermal and chemical bath deposition (CBD) process. Its photocatalytic H2-production performance was tested. Mass ratio of CdS acted a pivotal part in light absorption and photocatalytic properties. Noticeably, promoted photocatalytic H2-production activity of 4134 μmol g−1 h-1 was achieved by the sample with optimal CdS content. Significantly, the photoluminescence (PL) detection of hydroxyl radicals, as well as the in-situ XPS measurements was selected to verify the direct Z-scheme charge migration mechanism. This mechanism endowed the composite with strong capability for hydrogen evolution and elucidated the improved photocatalytic performance. The improvement of photocatalytic activity was due to hierarchical structure, extended visible light response and direct Z-scheme mechanism. This work will give an innovative vision in constructing direct Z-scheme photocatalytic system with great photocatalytic H2-production activity.
607 citations
TL;DR: In this paper, a rice crust-like structure was achieved through the uniform distribution of TiO2 nanoparticles on MXene Ti3C2 through calcination method and a unique rice crustlike structure of the prepared samples rendered the composite with large population of the surface active sites.
557 citations
TL;DR: CdS hollow spheres, on which monolayer nitrogen-doped graphene is in situ grown by chemical vapor deposition, are applied for realizing effective photocatalytic CO2 reduction, and the yield of CO and CH4 can be increased by four and five times than that of pristine CdSollow spheres, respectively.
Abstract: Photocatalytic CO2 reduction is an effective way to simultaneously mitigate the greenhouse effect and the energy crisis. Herein, CdS hollow spheres, on which monolayer nitrogen-doped graphene is in situ grown by chemical vapor deposition, are applied for realizing effective photocatalytic CO2 reduction. The constructed photocatalyst possesses a hollow interior for strengthening light absorption, a thin shell for shortening the electron migration distance, tight adhesion for facilitating separation and transfer of carriers, and a monolayer nitrogen-doped graphene surface for adsorbing and activating CO2 molecules. Achieving seamless contact between a photocatalyst and a cocatalyst, which provides a pollution-free and large-area transport interface for carriers, is an effective strategy for improving the photocatalytic CO2 reduction performance. Therefore, the yield of CO and CH4 , as dominating products, can be increased by four and five times than that of pristine CdS hollow spheres, respectively. This work emphasizes the importance of contact interface regulation between the photocatalyst and the cocatalyst and provides new ideas for the seamless and large-area contact of heterojunctions.
469 citations
Cited by
More filters
TL;DR: In this article, the authors soberly reflect the charge transfer mechanism from many perspectives and are finally aware of the fundamental challenges they face to ensure a correct understanding, it is necessary to share their analysis with others Moreover, step-scheme heterojunctions, consisting of a reduction photocatalyst and an oxidizer with staggered band structure, are introduced to avoid misinterpretation.
1,636 citations
TL;DR: In this paper, an ultrathin 2D/2D WO3/g-C3N4 step-like composite composite heterojunction photocatalysts were fabricated by electrostatic self-assembly of ultra-thin tungsten trioxide (WO3) and graphitic carbon nitride (g)-nodes.
Abstract: The appropriate interfacial contact of heterojunction photocatalysts plays a critical role in transfer/separation of interfacial charge carriers. Design of two-dimensional (2D)/2D surface-to-surface heterojunction is an effective method for improving photocatalytic activity since greater contact area can enhance interfacial charge transfer rate. Herein, ultrathin 2D/2D WO3/g-C3N4 step-like composite heterojunction photocatalysts were fabricated by electrostatic self-assembly of ultrathin tungsten trioxide (WO3) and graphitic carbon nitride (g-C3N4) nanosheets. The ultrathin WO3 and g-C3N4 nanosheets were obtained by electrostatic-assisted ultrasonic exfoliation of bulk WO3 and a two-step thermal-etching of bulk g-C3N4, respectively. The thickness of ultrathin WO3 and g-C3N4 nanosheets are 2.5–3.5 nm, which is equivalent to 5–8 atomic or molecular layer thickness. This ultrathin layered heterojunction structure can enhance surface photocatalytic rate because photogenerated electrons and holes at heterogeneous interface more easily transfer to surface of photocatalysts. Therefore, the obtained ultrathin 2D/2D WO3/g-C3N4 step-scheme (S-scheme) heterojunction photocatalysts exhibited better H2-production activity than pure g-C3N4 and WO3 with the same loading amount of Pt as cocatalyst. The mechanism and driving force of charge transfer and separation in S-scheme heterojunction photocatalysts are investigated and discussed. This investigation will provide new insight about designing and constructing novel S-scheme heterojunction photocatalysts.
1,440 citations
TL;DR: Various cocatalysts, such as the biomimetic, metal-based,Metal-free, and multifunctional ones, and their selectivity for CO2 photoreduction are summarized and discussed, along with the recent advances in this area.
Abstract: Photoreduction of CO2 into sustainable and green solar fuels is generally believed to be an appealing solution to simultaneously overcome both environmental problems and energy crisis. The low selectivity of challenging multi-electron CO2 photoreduction reactions makes it one of the holy grails in heterogeneous photocatalysis. This Review highlights the important roles of cocatalysts in selective photocatalytic CO2 reduction into solar fuels using semiconductor catalysts. A special emphasis in this review is placed on the key role, design considerations and modification strategies of cocatalysts for CO2 photoreduction. Various cocatalysts, such as the biomimetic, metal-based, metal-free, and multifunctional ones, and their selectivity for CO2 photoreduction are summarized and discussed, along with the recent advances in this area. This Review provides useful information for the design of highly selective cocatalysts for photo(electro)reduction and electroreduction of CO2 and complements the existing reviews on various semiconductor photocatalysts.
1,365 citations
TL;DR: In this article, a critical review presents the recent advances and progress in the design and synthesis of various semiconductor photocatalytic technology that converts solar energy into chemical fuel has been widely studied.
Abstract: To solve the problem of the global energy shortage and the pollution of the environment, in recent years, semiconductor photocatalytic technology that converts solar energy into chemical fuel has been widely studied. Regarding semiconductor-based photocatalysts, CdS has attracted extensive attention due to its relatively narrow bandgap for visible-light response and sufficiently negative potential of the conduction band edge for the reduction of protons. Studies have shown that CdS-based photocatalysts possess excellent photocatalytic performance in terms of solar-fuel generation and environmental purification. This critical review presents the recent advances and progress in the design and synthesis of various CdS and CdS-based photocatalysts. The basic physical and chemical properties of CdS and the related growth mechanism have been briefly summarized. Moreover, the applications of CdS-based photocatalysts have been discussed such as in photocatalytic hydrogen production, reduction of CO2 to hydrocarbon fuels and degradation of pollutants. Finally, a brief perspective on the challenges and future directions for the development of CdS and CdS-based photocatalysts are also presented.
1,054 citations
TL;DR: In this article, a review concisely compiles the recent progress in the fabrication, modification, and major applications of the direct Z-scheme photocatalysts; the latter include water splitting, carbon dioxide reduction, degradation of pollutants, and biohazard disinfection.
1,013 citations