Author
Loc V. Duong
Bio: Loc V. Duong is an academic researcher from Queensland University of Technology. The author has contributed to research in topics: Raman spectroscopy & Gibbsite. The author has an hindex of 16, co-authored 35 publications receiving 1552 citations.
Papers
More filters
••
15 Apr 2006TL;DR: The chemical compositions based on the XPS survey scans were in good agreement with the expected composition and a distinction could be made between boehmite and pseudoboehmitebased on the slightly lower ratio of oxygen to hydroxyl groups and water in pseudobOEhmite.
Abstract: Synthetic corundum (Al2O3), gibbsite (Al(OH)3), bayerite (Al(OH)3), boehmite (AlO(OH)) and pseudoboehmite (AlO(OH)) have been studied by high resolution XPS. The chemical compositions based on the XPS survey scans were in good agreement with the expected composition. High resolution Al2p scans showed no significant changes in binding energy, with all values between 73.9 and 74.4 eV. Only bayerite showed two transitions, associated with the presence of amorphous material in the sample. More information about the chemical and crystallographic environment was obtained from the O1s high resolution spectra. Here a clear distinction could be made between oxygen in the crystal structure, hydroxyl groups and adsorbed water. Oxygen in the crystal structure was characterised by a binding energy of about 530.6 eV in all minerals. Hydroxyl groups, present either in the crystal structure or on the surface, exhibited binding energies around 531.9 eV, while water on the surface showed binding energies around 533.0 eV. A distinction could be made between boehmite and pseudoboehmite based on the slightly lower ratio of oxygen to hydroxyl groups and water in pseudoboehmite.
386 citations
••
TL;DR: In this article, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-Ray Diffraction (XRD) were used to provide new insights into the interlayer structure and morphology of HDTMA+/montmorillonite organoclays.
299 citations
••
TL;DR: The structural transformation between goethite and hematite through thermal dehydroxylation was interpreted in order to provide criteria that can be used for the characterisation of thermally activated bauxite and their conversion to activated alumina phases.
191 citations
••
TL;DR: In this article, the authors present an overview of the modification of clay minerals by propping apart the clay layers with an inorganic complex, which is converted into a permanent two-dimensional structure, known as pillared clay or shortly PILC, by thermal treatment.
Abstract: This paper presents an overview of the modification of clay minerals by propping apart the clay layers with an inorganic complex. This expanded material is converted into a permanent two-dimensional structure, known as pillared clay or shortly PILC, by thermal treatment. The resulting material exhibits a two-dimensional porous structure with acidic properties comparable to that of zeolites. Synthetic as well as natural smectites serve as precursors for the synthesis of Al, Zr, Ti, Fe, Cr, Ga, V, Si and other pillared clays as well as mixed Fe/Al, Ga/Al, Si/Al, Zr/Al and other mixed metal pillared clays. Biofuels form an interesting renewable energy source, where these porous, catalytically active materials can play an important role in the conversion of vegetable oils, such as canola oil, into biodiesel. Transesterification of vegetable oil is currently the method of choice for conversion to biofuel. The second part of this review focuses on the catalysts and cracking reaction conditions used for the production of biofuel. A distinction has been made in three different vegetable oils as starting materials: canola oil, palm oil and sunflower oil.
131 citations
••
TL;DR: Aluminium substitutedGoethite is thermally more stable than non-substituted goethite and is in harmony with the results of XRD and DTGA.
106 citations
Cited by
More filters
••
TL;DR: Although significant literature exists on microalgal growth and biochemistry, significantly more work needs to be undertaken to understand and potentially manipulate algal lipid metabolism, which means simulations that incorporate financial elements are likely to be increasingly useful for predicting reactor design efficiency and life cycle analysis.
Abstract: Microalgae provide various potential advantages for biofuel production when compared with ‘traditional’ crops. Specifically, large-scale microalgal culture need not compete for arable land, while in theory their productivity is greater. In consequence, there has been resurgence in interest and a proliferation of algae fuel projects. However, while on a theoretical basis, microalgae may produce between 10- and 100-fold more oil per acre, such capacities have not been validated on a commercial scale. We critically review current designs of algal culture facilities, including photobioreactors and open ponds, with regards to photosynthetic productivity and associated biomass and oil production and include an analysis of alternative approaches using models, balancing space needs, productivity and biomass concentrations, together with nutrient requirements. In the light of the current interest in synthetic genomics and genetic modifications, we also evaluate the options for potential metabolic engineering of the lipid biosynthesis pathways of microalgae. We conclude that although significant literature exists on microalgal growth and biochemistry, significantly more work needs to be undertaken to understand and potentially manipulate algal lipid metabolism. Furthermore, with regards to chemical upgrading of algal lipids and biomass, we describe alternative fuel synthesis routes, and discuss and evaluate the application of catalysts traditionally used for plant oils. Simulations that incorporate financial elements, along with fluid dynamics and algae growth models, are likely to be increasingly useful for predicting reactor design efficiency and life cycle analysis to determine the viability of the various options for large-scale culture. The greatest potential for cost reduction and increased yields most probably lies within closed or hybrid closed–open production systems.
849 citations
••
TL;DR: Commercial application of algal technology for metal removal from wastewaters, emphasis should be given to selection of strains with high metal sorption capacity, adequate understanding of sorption mechanisms, and development of low-cost methods for cell immobilization.
Abstract: Many algae have immense capability to sorb metals, and there is considerable potential for using them to treat wastewaters. Metal sorption involves binding on the cell surface and to intracellular ligands. The adsorbed metal is several times greater than intracellular metal. Carboxyl group is most important for metal binding. Concentration of metal and biomass in solution, pH, temperature, cations, anions and metabolic stage of the organism affect metal sorption. Algae can effectively remove metals from multi-metal solutions. Dead cells sorb more metal than live cells. Various pretreatments enhance metal sorption capacity of algae. CaCl2 pretreatment is the most suitable and economic method for activation of algal biomass. Algal periphyton has great potential for removing metals from wastewaters. An immobilized or granulated biomass-filled column can be used for several sorption/desorption cycles with unaltered or slightly decreased metal removal. Langmuir and Freundlich models, commonly used for fitting sorption data, cannot precisely describe metal sorption since they ignore the effect of pH, biomass concentration, etc. For commercial application of algal technology for metal removal from wastewaters, emphasis should be given to: (i) selection of strains with high metal sorption capacity, (ii) adequate understanding of sorption mechanisms, (iii) development of low-cost methods for cell immobilization, (iv) development of better models for predicting metal sorption, (v) genetic manipulation of algae for increased number of surface groups or over expression of metal binding proteins, and (vi) economic feasibility.
707 citations
••
TL;DR: This work attempts to fabricate pillared Ti3C2 MXene via a facile liquid-phase cetyltrimethylammonium bromide (CTAB) prepillaring and Sn4+ pillaring method and reveals higher energy density and power density compared with conventional MXene materials.
Abstract: Two-dimensional transition-metal carbide materials (termed MXene) have attracted huge attention in the field of electrochemical energy storage due to their excellent electrical conductivity, high volumetric capacity, etc. Herein, with inspiration from the interesting structure of pillared interlayered clays, we attempt to fabricate pillared Ti3C2 MXene (CTAB–Sn(IV)@Ti3C2) via a facile liquid-phase cetyltrimethylammonium bromide (CTAB) prepillaring and Sn4+ pillaring method. The interlayer spacing of Ti3C2 MXene can be controlled according to the size of the intercalated prepillaring agent (cationic surfactant) and can reach 2.708 nm with 177% increase compared with the original spacing of 0.977 nm, which is currently the maximum value according to our knowledge. Because of the pillar effect, the assembled LIC exhibits a superior energy density of 239.50 Wh kg–1 based on the weight of CTAB–Sn(IV)@Ti3C2 even under higher power density of 10.8 kW kg–1. When CTAB–Sn(IV)@Ti3C2 anode couples with commercial AC ...
642 citations
••
TL;DR: In this paper, a review of the use of layered and porous aluminosilicates and layered double hydroxides as catalysts for the Fenton reaction is presented, and the results reported up to late 2009 are presented.
Abstract: This review focuses on the use of layered and porous aluminosilicates and layered double hydroxides as catalysts for the Fenton reaction. In the general sections of this review we present the elementary equations leading to the generation of hydroxyl radicals from H2O2 and the subsequent reactivity of this highly aggressive species. After justifying the advantages of using insoluble solids as heterogeneous catalysts, replacing soluble iron salts, we discuss the desirable features that should have an ideal Fenton catalyst and which are the parameters to be considered when ranking the efficiency of the materials. The main part of this review is focused on presenting the results reported up to late 2009 obtained using layered and porous aluminosilicates as heterogeneous catalysts. The structure of these materials is briefly presented to highlight the benefits and advantages of each type of solid with respect to their use as catalysts. When presenting the catalytic data, special emphasis is made on the missing data that would be useful to clarify, the relative efficiency and performance of the materials. In the final concluding remarks we stress again that the present situation needs to be clarified to draw solid conclusions on the relative performance and efficiency of the tested catalysts.
572 citations
••
TL;DR: Raman spectroscopy is a versatile non-destructive technique for fluid inclusion analysis, with a wide field of applications ranging from qualitative detection of solid, liquid and gaseous components to identification of polyatomic ions in solution as mentioned in this paper.
506 citations