Luigi Vesce

Bio: Luigi Vesce is an academic researcher from University of Rome Tor Vergata. The author has contributed to research in topics: Perovskite (structure) & Photovoltaic system. The author has an hindex of 18, co-authored 38 publications receiving 868 citations.

MoS2 Quantum Dot/Graphene Hybrids for Advanced Interface Engineering of a CH3NH3PbI3 Perovskite Solar Cell with an Efficiency of over 20.

Abstract: Interface engineering of organic–inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). In fact, the perovskite photoactive layer needs to work synergistically with the other functional components of the cell, such as charge transporting/active buffer layers and electrodes. In this context, graphene and related two-dimensional materials (GRMs) are promising candidates to tune “on demand” the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of molybdenum disulfide (MoS2) and reduced graphene oxide (RGO) hybrids both as hole transport layer (HTL) and active buffer layer (ABL) in mesoscopic methylammonium lead iodide (CH3NH3PbI3) perovskite (MAPbI3)-based PSCs. We show that zero-dimensional MoS2 quantum dots (MoS2 QDs), derived by liquid phase exfoliated MoS2 flakes, provide both hole-extraction and electron-blocking properties. In fact, on one hand, intrinsic n-typ...

Laser-Patterning Engineering for Perovskite Solar Modules With 95% Aperture Ratio

Abstract: Small area hybrid organometal halide perovskite based solar cells reached performances comparable to the multicrystalline silicon wafer cells. However, industrial applications require the scaling-up of devices to module-size. Here, we report the first fully laser-processed large area (14.5 cm2) perovskite solar module with an aperture ratio of 95% and a power conversion efficiency of 9.3%. To obtain this result, we carried out thorough analyses and optimization of three laser processing steps required to realize the serial interconnection of various cells. By analyzing the statistics of the fabricated modules, we show that the error committed over the projected interconnection dimensions is sufficiently low to permit even higher aperture ratios without additional efforts.

Optimization of nanostructured titania photoanodes for dye-sensitized solar cells: Study and experimentation of TiCl4 treatment

Abstract: Titanium tetrachloride (TiCl 4 ) treatment processed by chemical bath deposition is usually adopted as pre- and post-treatment for nanocrystalline titanium dioxide (TiO 2 ) film deposition in the dye-sensitized solar cell (DSC) technology. Pre-treatment influences positively the bonding strength between the fluorinated tin oxide (FTO) substrate and the porous TiO 2 layer, blocking the charge recombination at the interface between the conduction glass FTO and the I 3 − ions present in the I − /I 3 − red-ox couple. Additionally, TiCl 4 post-treatment is a widely known method capable of improving the performance of dye-sensitized solar cells, in particular, the photocurrent collected from the device. In this study, the influence and effect of TiCl 4 pre- and post-treatment on the TiO 2 layer is proposed and compared to the untreated film. The relative DSC devices are characterized in terms of short circuit current density, open circuit voltage, fill factor, conversion efficiency and IPCE. The dark current characteristics of cells with a treated and untreated TiO 2 layer are also shown in order to evaluate the effect of TiCl 4 pre-treatment as a blocking layer.

The role of printing techniques for large-area dye sensitized solar cells

Abstract: The versatility of printing technologies and their intrinsic ability to outperform other techniques in large-area deposition gives scope to revolutionize the photovoltaic (PV) manufacturing field. Printing methods are commonly used in conventional silicon-based PVs to cover part of the production process. Screen printing techniques, for example, are applied to deposit electrical contacts on the silicon wafer. However, it is with the advent of third generation PVs that printing/coating techniques have been extensively used in almost all of the manufacturing processes. Among all the third generation PVs, dye sensitized solar cell (DSSC) technology has been developed up to commercialization levels. DSSCs and modules can be fabricated by adopting all of the main printing techniques on both rigid and flexible substrates. This allows an easy tuning of cell/module characteristics to the desired application. Transparency, colour, shape, layout and other DSSC's features can be easily varied by changing the printing parameters and paste/ink formulations used in the printing process. This review focuses on large-area printing/coating technologies for the fabrication of DSSCs devices. The most used and promising techniques are presented underlining the process parameters and applications.

Efficient sintering of nanocrystalline titanium dioxide films for dye solar cells via raster scanning laser

Abstract: By identifying the right combination of laser parameters, in particular the integrated laser fluence Φ, we fabricated dye solar cells (DSCs) with UV laser-sintered TiO2 films exhibiting a power conversion efficiency η=5.2%, the highest reported for laser-sintered devices. η is dramatically affected by Φ and a clear trend is reported. Significantly, DSCs fabricated by raster scanning the laser beam to sinter the TiO2 films are made as efficient as those with oven-sintered ones. These results, confirmed on three batches of cells, demonstrate the remarkable potential (noncontact, local, low cost, rapid, selective, and scalable) of scanning laser processing applied to DSC technology.

Meso-Substituted Porphyrins for Dye-Sensitized Solar Cells

Abstract: Among the several approaches for harnessing solar energy and converting it into electricity, dye-sensitized solar cells (DSSC) represent one of the most promising methods for future large-scale power production from renewable energy sources. In these cells, the sensitizer is one of the key components harvesting solar radiation and converting it into electric current. The electrochemical, photophysical, and ground and excited state properties of the sensitizer play an important role for charge transfer dynamics at the semiconductor interface. Moreover, for long-term stability and practical applications, electrolytes based on the iodine/triiodine couple also suffer from two other disadvantages: the corrosive effect toward the metal electrodes, and the partial absorption of the visible light by triiodine anions. These issues hence constitute one of the reasons that have encouraged the development of alternative iodine-free redox couples in liquid electrolytes for DSSCs.

Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells

Abstract: The performance of perovskite solar cells is predominantly limited by non-radiative recombination, either through trap-assisted recombination in the absorber layer or via minority carrier recombination at the perovskite/transport layer interfaces. Here, we use transient and absolute photoluminescence imaging to visualize all non-radiative recombination pathways in planar pin-type perovskite solar cells with undoped organic charge transport layers. We find significant quasi-Fermi-level splitting losses (135 meV) in the perovskite bulk, whereas interfacial recombination results in an additional free energy loss of 80 meV at each individual interface, which limits the open-circuit voltage (VOC) of the complete cell to ~1.12 V. Inserting ultrathin interlayers between the perovskite and transport layers leads to a substantial reduction of these interfacial losses at both the p and n contacts. Using this knowledge and approach, we demonstrate reproducible dopant-free 1 cm2 perovskite solar cells surpassing 20% efficiency (19.83% certified) with stabilized power output, a high VOC (1.17 V) and record fill factor (>81%). Non-radiative recombination is a critical limiting factor for perovskite solar cell performance. Stolterfoht et al. visualize the various recombination pathways in planar pin cells with photoluminescence imaging and use it to design improved solar cells with 1 cm2 areas and ~20% efficiency.

Flexible perovskite photovoltaic modules and cells rased on atomic layer deposited compact layers and UV-irradiated TiO2 scaffolds on plastic substrates

Abstract: Recently, research on hybrid organometal halide perovskites for photovoltaic applications has delivered impressive growth in power conversion effi ciencies (PCEs) with a current certifi ed record of 17.9% and growing. [ 1–6 ] Key advantages of perovskites devices, together with high PCEs, are represented by the ease of the solution processing steps and their low temperature (<140 °C). [ 7,8 ] These values enable the fabrication on plastic substrates, [ 9 ] compatible with a continuous roll-toroll manufacturing which can potentially contribute to dramatically lower the production costs of large area modules. [ 10 ] Moreover, fl exible devices can also be conformed to curved surfaces to enhance power conversion densities. [ 11,12 ]

Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules

Abstract: Novel photovoltaic technologies such as perovskites hold the promise of a reduced levelized cost of electricity, but the low-cost potential depends on the ability to scale-up solution-based deposition. So far, complex fluid dynamics have limited the solution deposition of uniform pinhole-free organic–inorganic perovskite thin films over large areas. Here, we show that very small amounts (tens of parts per million) of surfactants (for example, l-α-Phosphatidylcholine) dramatically alter the fluid drying dynamics and increase the adhesion of the perovskite ink to the underlying non-wetting charge transport layer. The additives enable blading of smooth perovskite films at a coating rate of 180 m h–1 with root-mean-square roughness of 14.5 nm over 1 cm. The surfactants also passivate charge traps, resulting in efficiencies over 20% for small-area solar cells. Fast blading in air of perovskite films results in stabilized module efficiencies of 15.3% and 14.6% measured at aperture areas of 33.0 cm2 and 57.2 cm2, respectively. Scaling up perovskite film deposition necessitates controlling the film formation dynamics. Here, Deng et al. use amphoteric choline surfactants to blade-coat well-passivated films, reaching module efficiencies of ~15% for aperture areas up to 57 cm2.

Substrates for flexible electronics: A practical investigation on the electrical, film flexibility, optical, temperature, and solvent resistance properties

Abstract: Designing and developing flexible electronics requires a thorough investigation of the substrates available for the fabrication of devices. Here, we present a practical study on a variety of significant substrates: polyethylene terephthalate (PET), its heat-stabilized (HS) derivative, HS-PET, and polyethylene naphthalate (PEN) plastic insulating films; indium tin oxide (ITO)-coated ITO/PEN and ITO/PET transparent conducting films; rigid ITO/glass and FTO/glass substrates; stainless steel and titanium foils. We put the substrates through a range of tests these actually undergo during device fabrication to determine their optical, mechanical flexibility (under different types of tensile and compressive stress bending with and without a PEDOT:PSS conducting polymer layer), solvent resistance, stability to temperature treatment (conductivity and deformation), and to UV irradiation. We highlight issues and propose solutions to improve substrate response. The results and thresholds extracted reveal limitations and windows of opportunity useful for the designer of flexible optoelectronics in determining manufacturing processes and the final applications under everyday operation.