Luis Cardenas

Bio: Luis Cardenas is an academic researcher from Claude Bernard University Lyon 1. The author has contributed to research in topics: Catalysis & X-ray photoelectron spectroscopy. The author has an hindex of 17, co-authored 55 publications receiving 1764 citations. Previous affiliations of Luis Cardenas include Université du Québec & Centre national de la recherche scientifique.

Bandgap tuning of multiferroic oxide solar cells

Abstract: Tuning the bandgap of multiferroic solar cells made from Bi2FeCrO6 is achieved by cationic ordering and is shown to dramatically improve their performance.

Insight into organometallic intermediate and its evolution to covalent bonding in surface-confined ullmann polymerization.

Abstract: We provide insight into surface-catalyzed dehalogenative polymerization, analyzing the organometallic intermediate and its evolution into planar polymeric structures. A combined study using scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED), near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and first-principles calculations unveils the structural conformation of substrate-bound phenylene intermediates generated from 1,4-dibromobenzene precursors on Cu(110), showing the stabilizing role of the halogen. The appearance of covalently bonded conjugated structures is followed in real time by fast-XPS measurements (with an acquisition time of 2 s per spectrum and heating rate of 2 K/s), showing that the detaching of phenylene units from the copper substrate and subsequent polymerization occur upon annealing above 460 ± 10 K.

Synthesis and electronic structure of a two dimensional π-conjugated polythiophene

Abstract: We report the synthesis and first electronic characterization of an atomically thin two dimensional π-conjugated polymer. Polymerization via Ullmann coupling of a tetrabrominated tetrathienoanthracene on Ag(111) in ultra-high vacuum (UHV) produces a porous 2D polymer network that has been characterized by scanning tunnelling microscopy (STM). High-resolution X-ray photoelectron spectroscopy (HRXPS) shows that the reaction proceeds via two distinct steps: dehalogenation of the brominated precursor, which begins at room temperature (RT), and C–C coupling of the resulting Ag-bound intermediates, which requires annealing at 300 °C. The formation of the 2D conjugated network is accompanied by a shift of the occupied molecular states by 0.6 eV towards the Fermi level, as observed by UV photoelectron spectroscopy (UPS). A theoretical analysis of the electronic gap reduction in the transition from monomeric building blocks to various 1D and 2D oligomers and polymers yields important insight into the effect of topology on the electronic structure of 2D conjugated polymers.

Kinetics and thermodynamics in surface-confined molecular self-assembly

Abstract: Two-dimensional molecular self-assembly at the liquid/solid interface is a widely employed approach in surface science to pattern surfaces at the nanometre scale. A multitude of supramolecular structures can be realized depending on parameters such as the functionalization of the molecular building blocks, the temperature at which self-assembly takes place, the type of solvent and solute concentration. How these and other parameters influence the kinetics and thermodynamics of the self-assembly process is the subject of this review.

Ullmann-type coupling of brominated tetrathienoanthracene on copper and silver

Abstract: We report the synthesis of extended two-dimensional organic networks on Cu(111), Ag(111), Cu(110), and Ag(110) from thiophene-based molecules. A combination of scanning tunnelling microscopy and X-ray photoemission spectroscopy yields insight into the reaction pathways from single molecules towards the formation of two-dimensional organometallic and polymeric structures via Ullmann reaction dehalogenation and C–C coupling. The thermal stability of the molecular networks is probed by annealing at elevated temperatures of up to 500 °C. On Cu(111) only organometallic structures are formed, while on Ag(111) both organometallic and covalent polymeric networks were found to coexist. The ratio between organometallic and covalent bonds could be controlled by means of the annealing temperature. The thiophene moieties start degrading at 200 °C on the copper surface, whereas on silver the degradation process becomes significant only at 400 °C. Our work reveals how the interplay of a specific surface type and temperature steers the formation of organometallic and polymeric networks and describes how these factors influence the structural integrity of two-dimensional organic networks.

2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications

Abstract: We report on the fabrication and properties of the semiconducting 2D (CH3(CH2)3NH3)2(CH3NH3)n–1PbnI3n+1 (n = 1, 2, 3, and 4) perovskite thin films. The band gaps of the series decrease with increasing n values, from 2.24 eV (CH3(CH2)3NH3)2PbI4 (n = 1) to 1.52 eV CH3NH3PbI3 (n = ∞). The compounds exhibit strong light absorption in the visible region, accompanied by strong photoluminescence at room temperature, rendering them promising light absorbers for photovoltaic applications. Moreover, we find that thin films of the semi-2D perovskites display an ultrahigh surface coverage as a result of the unusual film self-assembly that orients the [PbnI3n+1]− layers perpendicular to the substrates. We have successfully implemented this 2D perovskite family in solid-state solar cells, and obtained an initial power conversion efficiency of 4.02%, featuring an open-circuit voltage (Voc) of 929 mV and a short-circuit current density (Jsc) of 9.42 mA/cm2 from the n = 3 compound. This result is even more encouraging con...

Mutual Insight on Ferroelectrics and Hybrid Halide Perovskites: A Platform for Future Multifunctional Energy Conversion.

Abstract: An insight into the analogies, state-of-the-art technologies, concepts, and prospects under the umbrella of perovskite materials (both inorganic-organic hybrid halide perovskites and ferroelectric perovskites) for future multifunctional energy conversion and storage devices is provided. Often, these are considered entirely different branches of research; however, considering them simultaneously and holistically can provide several new opportunities. Recent advancements have highlighted the potential of hybrid perovskites for high-efficiency solar cells. The intrinsic polar properties of these materials, including the potential for ferroelectricity, provide additional possibilities for simultaneously exploiting several energy conversion mechanisms such as the piezoelectric, pyroelectric, and thermoelectric effect and electrical energy storage. The presence of these phenomena can support the performance of perovskite solar cells. The energy conversion using these effects (piezo-, pyro-, and thermoelectric effect) can also be enhanced by a change in the light intensity. Thus, there lies a range of possibilities for tuning the structural, electronic, optical, and magnetic properties of perovskites to simultaneously harvest energy using more than one mechanism to realize an improved efficiency. This requires a basic understanding of concepts, mechanisms, corresponding material properties, and the underlying physics involved with these effects.

Bismuth Based Hybrid Perovskites A3Bi2 I9 (A: Methylammonium or Cesium) for Solar Cell Application.

Abstract: Low-toxic bismuth-based perovskites are prepared for the possible replacement of lead perovskite in solar cells. The perovskites have a hexagonal crystalline phase and light absorption in the visible region. A power conversion efficiency of over 1% is obtained for a solar cell with Cs3 Bi2 I9 perovskite, and it is concluded that bismuth perovskites have very promising properties for further development in solar cells.

Solution Combustion Synthesis of Nanoscale Materials

Abstract: Solution combustion is an exciting phenomenon, which involves propagation of self-sustained exothermic reactions along an aqueous or sol–gel media. This process allows for the synthesis of a variety of nanoscale materials, including oxides, metals, alloys, and sulfides. This Review focuses on the analysis of new approaches and results in the field of solution combustion synthesis (SCS) obtained during recent years. Thermodynamics and kinetics of reactive solutions used in different chemical routes are considered, and the role of process parameters is discussed, emphasizing the chemical mechanisms that are responsible for rapid self-sustained combustion reactions. The basic principles for controlling the composition, structure, and nanostructure of SCS products, and routes to regulate the size and morphology of the nanoscale materials are also reviewed. Recently developed systems that lead to the formation of novel materials and unique structures (e.g., thin films and two-dimensional crystals) with unusual...

Lead-Free Halide Double Perovskites via Heterovalent Substitution of Noble Metals

Abstract: Lead-based halide perovskites are emerging as the most promising class of materials for next-generation optoelectronics; however, despite the enormous success of lead-halide perovskite solar cells, the issues of stability and toxicity are yet to be resolved. Here we report on the computational design and the experimental synthesis of a new family of Pb-free inorganic halide double perovskites based on bismuth or antimony and noble metals. Using first-principles calculations we show that this hitherto unknown family of perovskites exhibits very promising optoelectronic properties, such as tunable band gaps in the visible range and low carrier effective masses. Furthermore, we successfully synthesize the double perovskite Cs2BiAgCl6, perform structural refinement using single-crystal X-ray diffraction, and characterize its optical properties via optical absorption and photoluminescence measurements. This new perovskite belongs to the Fm3m space group and consists of BiCl6 and AgCl6 octahedra alternating in...