다중혈관 관상동맥 환자에서 y-문합을 이용하여 양쪽 내흉동맥만을 사용한 우회술의 조기 성적

[신간의 별자리x] 우리/미술, 그리고 ‘슬픔의 박물관’

Research in the use of organic polymers as the active semiconductors in light-emitting diodes has advanced rapidly, and prototype devices now meet realistic specifications for applications. These achievements have provided insight into many aspects of the background science, from design and synthesis of materials, through materials fabrication issues, to the semiconductor physics of these polymers.

Electroluminescence in conjugated polymers

Organic thin-film transistors (OTFTs) have lived to see great improvements in recent years. This review presents new insight into conduction mechanisms and performance characteristics, as well as opportunities for modeling properties of OTFTs. The shifted focus in research from novel chemical structures to fabrication technologies that optimize morphology and structural order is underscored by chapters on vacuum-deposited and solution-processed organic semiconducting films. Finally, progress in the growing field of the n-type OTFTs is discussed in ample detail. The Figure, showing a pentacene film edge on SiO2, illustrates the morphology issue.

Organic Thin Film Transistors for Large Area Electronics

2.2. Materials 929 2.3. Factors Influencing Charge Mobility 931 2.3.1. Molecular Packing 931 2.3.2. Disorder 932 2.3.3. Temperature 933 2.3.4. Electric Field 934 2.3.5. Impurities 934 2.3.6. Pressure 934 2.3.7. Charge-Carrier Density 934 2.3.8. Size/molecular Weight 935 3. The Charge-Transport Parameters 935 3.1. Electronic Coupling 936 3.1.1. The Energy-Splitting-in-Dimer Method 936 3.1.2. The Orthogonality Issue 937 3.1.3. Impact of the Site Energy 937 3.1.4. Electronic Coupling in Oligoacene Derivatives 938

Charge transport in organic semiconductors.

The thiophene oligomer α-hexathienylene (α-6T) has been successfully used as the active semiconducting material in thin-film transistors. Field-induced conductivity in thin-film transistors with α-6T active layers occurs only near the interfacial plane, whereas the residual conductivity caused by unintentional doping scales with the thickness of the layer. The two-dimensional nature of the field-induced conductivity is due not to any anisotropy in transport with respect to any molecular axis but to interface effects. Optimized methods of device fabrication have resulted in high field-effect mobilities and on/off current ratios of > 106. The current densities and switching speeds are good enough to allow consideration of these devices in practical large-area electronic circuits.

https://science.sciencemag.org/content/sci/268/5208/270.full.pdf

Organic transistors: two-dimensional transport and improved electrical characteristics.

A spinnable coating capable of releasing metal species to a broth of living organisms in a controlled manner is an extremely interesting material for a number of biotechnological applications. Poly...

Copper Nanoparticle/Polymer Composites with Antifungal and Bacteriostatic Properties

The functioning principles of electronic sensors based on organic semiconductor field-effect transistors (OFETs) are presented. The focus is on biological sensors but also chemical ones are reviewed to address general features. The field-induced electronic transport and the chemical and biological interactions for the sensing, each occurring at the relevant functional interface, are separately introduced. Once these key learning points have been acquired, the combined picture for the FET electronic sensing is proposed. The perspective use of such devices in point-of-care is introduced, after some basics on analytical biosensing systems are provided as well. This tutorial review includes also a necessary overview of the OFET sensing structures, but the focus will be on electronic rather than electrochemical detection. The differences among the structures are highlighted along with the implications on the performance level in terms of key analytical figures of merit such as: repeatability, sensitivity and selectivity.

Organic field-effect transistor sensors: a tutorial review

o-Phenylenediamine has been used for glucose oxidase (GOx) immobilization on Pt electrodes by electrochemical polymerization at +0.65 V vs SCE. By this approach the enzyme is entrapped in a strongly adherent, highly reproducible thin membrane, whose thickness is around 10 nm. This one-step procedure produces a glucose sensor with a response time less than 1 s, an active enzyme loading higher than 3 units/cm2 of electrode surface, a high sensitivity, and a sufficiently wide linear range. The glucose response shows an apparent Michaelis-Menten constant, K'm = 14.2 mM, and a limiting current density, jmax of 181 microA/cm2. The product kD of partition and diffusion coefficients of glucose in the polymer film is on the order of 10(-13) cm2/s. Due to permselectivity characteristics of the membrane, the access of ascorbate, a common interfering species, to the electrode surface is blocked. To our knowledge, this represents the first report of a membrane capable, at the same time, of immobilizing GOx and rejecting ascorbate. The interesting electrode behavior can be rationalized by using an existing model predicting the amperometric response of an immobilized GOx system.

Glucose fast-response amperometric sensor based on glucose oxidase immobilized in an electropolymerized poly(o-phenylenediamine) film

We show that organic thin-film transistors have suitable properties for use in gas sensors. Such sensors possess sensitivity and reproducibility in recognizing a range of gaseous analytes. A wealth of opportunities for chemical recognition arise from the variety of mechanisms associated with different semiconductor–analyte interactions, the ability to vary the chemical constitution of the semiconductor end/side groups, and also the nature of the thin-film morphology.

Luisa Torsi

Papers

Organic transistors: two-dimensional transport and improved electrical characteristics.

Copper Nanoparticle/Polymer Composites with Antifungal and Bacteriostatic Properties

Organic field-effect transistor sensors: a tutorial review

Glucose fast-response amperometric sensor based on glucose oxidase immobilized in an electropolymerized poly(o-phenylenediamine) film

Electronic sensing of vapors with organic transistors