Lung-Sheng Yang

Bio: Lung-Sheng Yang is an academic researcher from Communist University of the Toilers of the East. The author has contributed to research in topics: Boost converter & Buck–boost converter. The author has an hindex of 15, co-authored 44 publications receiving 1673 citations. Previous affiliations of Lung-Sheng Yang include National Cheng Kung University.

A Novel High Step-Up DC–DC Converter for a Microgrid System

Abstract: A novel high step-up dc-dc converter for a distributed generation system is proposed in this paper. The concept is composed of two capacitors, two diodes, and one coupled inductor. Two capacitors are charged in parallel, and are discharged in series by the coupled inductor. Thus, high step-up voltage gain can be achieved with an appropriate duty ratio. The voltage stresses on the main switch and output diode are reduced by a passive clamp circuit. Therefore, low resistance R for the main switch can be adopted to reduce conduction loss. In addition, the reverse-recovery problem of the diode is alleviated, and thus, the efficiency can be further improved. The operating principle and steady-state analyses of the voltage gain are also discussed in detail. Finally, a 24-V input voltage, 400-V output voltage, and 400-W output power prototype circuit of the proposed converter are implemented in the laboratory to verify the performance.

Novel High Step-Up DC–DC Converter for Distributed Generation System

Abstract: In this paper, a novel high step-up dc-dc converter for distributed generation systems is proposed. The concept is to utilize two capacitors and one coupled inductor. The two capacitors are charged in parallel during the switch-off period and are discharged in series during the switch-on period by the energy stored in the coupled inductor to achieve a high step-up voltage gain. In addition, the leakage-inductor energy of the coupled inductor is recycled with a passive clamp circuit. Thus, the voltage stress on the main switch is reduced. The switch with low resistance RDS(ON) can be adopted to reduce the conduction loss. In addition, the reverse-recovery problem of the diodes is alleviated, and thus, the efficiency can be further improved. The operating principle and steady-state analyses are discussed in detail. Finally, a prototype circuit with 24-V input voltage, 400-V output voltage, and 200-W output power is implemented in the laboratory to verify the performance of the proposed converter.

Novel High Step-Up DC–DC Converter With Coupled-Inductor and Voltage-Doubler Circuits

Abstract: In this paper, a novel high step-up dc-dc converter with coupled-inductor and voltage-doubler circuits is proposed. The converter achieves high step-up voltage gain with appropriate duty ratio and low voltage stress on the power switches. Also, the energy stored in the leakage inductor of the coupled inductor can be recycled to the output. The operating principles and the steady-state analyses of the proposed converter are discussed in detail. Finally, a prototype circuit of the proposed converter is implemented in the laboratory to verify the performance of the proposed converter.

Novel Isolated High-Step-Up DC–DC Converter With Voltage Lift

Abstract: A novel two-switch high-step-up isolated converter with voltage lift is proposed in this paper. The proposed isolated converter utilizes a transformer with low turn ratio to achieve high step-up gain. The secondary winding charges two boosting capacitors in parallel as switches during the switch-on period, and two boosting capacitors are discharged in series during the switch-off period. Thus, the converter has high voltage gain with appropriate duty ratio. In addition, by using two clamping diodes and a capacitor on the primary side, leakage energy is recycled, and the voltage spikes of the two active switches are clamped, thereby improving conversion efficiency. Finally, experimental results based on a prototype implemented in the laboratory with an input voltage of 24 V, an output voltage of 200 V, and an output power of 200 W verify the performance of the proposed isolated converter; full-load efficiency is nearly 93%.

High-Conversion-Ratio Bidirectional DC–DC Converter With Coupled Inductor

Abstract: In this paper, a high-conversion-ratio bidirectional dc-dc converter with coupled inductor is proposed. In the boost mode, two capacitors are parallel charged and series discharged by the coupled inductor. Thus, high step-up voltage gain can be achieved with an appropriate duty ratio. The voltage stress on the main switch is reduced by a passive clamp circuit. Therefore, the low resistance RDS(ON) of the main switch can be adopted to reduce conduction loss. In the buck mode, two capacitors are series charged and parallel discharged by the coupled inductor. The bidirectional converter can have high step-down gain. Aside from that, all of the switches achieve zero voltage-switching turn-on, and the switching loss can be improved. Due to two active clamp circuits, the energy of the leakage inductor of the coupled inductor is recycled. The efficiency can be further improved. The operating principle and the steady-state analyses of the voltage gain are discussed. Finally, a 24-V-input-voltage, 400-V-output-voltage, and 200-W-output-power prototype circuit is implemented in the laboratory to verify the performance.

Step-Up DC–DC Converters: A Comprehensive Review of Voltage-Boosting Techniques, Topologies, and Applications

Abstract: DC–DC converters with voltage boost capability are widely used in a large number of power conversion applications, from fraction-of-volt to tens of thousands of volts at power levels from milliwatts to megawatts. The literature has reported on various voltage-boosting techniques, in which fundamental energy storing elements (inductors and capacitors) and/or transformers in conjunction with switch(es) and diode(s) are utilized in the circuit. These techniques include switched capacitor (charge pump), voltage multiplier, switched inductor/voltage lift, magnetic coupling, and multistage/-level, and each has its own merits and demerits depending on application, in terms of cost, complexity, power density, reliability, and efficiency. To meet the growing demand for such applications, new power converter topologies that use the above voltage-boosting techniques, as well as some active and passive components, are continuously being proposed. The permutations and combinations of the various voltage-boosting techniques with additional components in a circuit allow for numerous new topologies and configurations, which are often confusing and difficult to follow. Therefore, to present a clear picture on the general law and framework of the development of next-generation step-up dc–dc converters, this paper aims to comprehensively review and classify various step-up dc–dc converters based on their characteristics and voltage-boosting techniques. In addition, the advantages and disadvantages of these voltage-boosting techniques and associated converters are discussed in detail. Finally, broad applications of dc–dc converters are presented and summarized with comparative study of different voltage-boosting techniques.

Optimal Protection Coordination for Microgrids With Grid-Connected and Islanded Capability

Abstract: Microgrids can be operated either grid-connected to reduce system losses and for peak shaving or islanded to increase reliability and provide backup power during utility outage. Such dual configuration capability imposes challenges on the design of the protection system. Fault current magnitudes will vary depending on the microgrid operating mode. In this paper, a microgrid protection scheme that relies on optimally sizing fault current limiters and optimally setting directional overcurrent relays is proposed. The protection scheme is optimally designed taking into account both modes of operation (grid-connected and islanded). The problem has been formulated as a constrained nonlinear programming problem and is solved using the genetic algorithm with the static penalty constraint-handling technique. The proposed approach is tested on two medium-voltage networks: a typical radial distribution system and on the IEEE 30-bus looped power distribution system equipped with directly connected conventional synchronous generators.

Nonisolated High Step-Up DC–DC Converters Adopting Switched-Capacitor Cell

Abstract: In a photovoltaic (PV)- or fuel-cell-based grid-connected power system, a high step-up dc-dc converter is required to boost the low voltage of a PV or fuel cell to a relatively high bus voltage for the downstream dc-ac grid-connected inverter. To integrate the advantages of the high voltage gain of a switched-capacitor (SC) converter and excellent output regulation of a switching-mode dc-dc converter, a method of combining the two types of converters is proposed in this paper. The basic idea is that when the switch is turned on, the inductor is charged, and the capacitors are connected in series to supply the load, and when the switch is turned off, the inductor releases energy to charge multiple capacitors in parallel, whose voltages are controlled by a pulsewidth modulation technique. Thus, a high voltage gain of the dc-dc converter can be obtained with good regulation. Based on this principle, a series of new topologies are derived, and the operating principles and voltage gains of the proposed converters are analyzed. Finally, the design of the proposed converter is given, and the experiment results are provided to verify the theoretical analysis.