M. Blodt

Bio: M. Blodt is an academic researcher from ENSEEIHT. The author has contributed to research in topics: Stator & Induction motor. The author has an hindex of 8, co-authored 9 publications receiving 981 citations.

Models for Bearing Damage Detection in Induction Motors Using Stator Current Monitoring

Abstract: This paper describes a new analytical model for the influence of rolling-element bearing faults on induction motor stator current. Bearing problems are one major cause for drive failures. Their detection is possible by vibration monitoring of characteristic bearing frequencies. As it is possible to detect other machine faults by monitoring the stator current, a great interest exists in applying the same method for bearing fault detection. After a presentation of the existing fault model, a new detailed approach is proposed. It is based on the following two effects of a bearing fault: 1. the introduction of a particular radial rotor movement and 2. load torque variations caused by the bearing fault. The theoretical study results in new expressions for the stator current frequency content. Experimental tests with artificial and realistic bearing damage were conducted by measuring vibration, torque, and stator current. The obtained results by spectral analysis of the measured quantities validate the proposed theoretical approach.

On-Line Monitoring of Mechanical Faults in Variable-Speed Induction Motor Drives Using the Wigner Distribution

Abstract: This paper deals with the detection of mechanical load faults in induction motors during speed transients. The detection strategy is based on stator current analysis. Mechanical load faults generally lead to load torque oscillations at specific frequencies related to the mechanical rotor speed. The torque oscillations produce a characteristic sinusoidal phase modulation of the stator current. Speed transients result in time-varying supply frequencies that prevent the use of classical, Fourier transform-based spectral estimation. This paper proposes the use of a time-frequency distribution, the Wigner Distribution, for stator current analysis. Fault indicators are extracted from the distribution for on-line condition monitoring. The proposed methods are implemented on a low-cost digital signal processor. Experimental results in a steady-state and during transients with load torque oscillations and load imbalance are presented.

Models for bearing damage detection in induction motors using stator current monitoring

Abstract: This paper describes new models for the influence of rolling-element bearing faults on induction motor stator current. Bearing problems are one major cause for drive failures. Their detection is possible by vibration monitoring of characteristic bearing frequencies. As it is possible to detect other machine faults by monitoring the stator current, a great interest exists in applying the same method for bearing fault detection. After a presentation of the existing fault model, a new detailed approach is proposed. It is based on two effects of a bearing fault: the introduction of a particular radial rotor movement and load torque variations caused by the bearing fault. The theoretical study results in new expressions for the stator current frequency content. Experimental tests with artificial and realistic bearing damage were conducted by measuring vibration, torque and stator current. The obtained results by spectral analysis of the measured quantities validate the proposed theoretical approach.

Distinguishing Load Torque Oscillations and Eccentricity Faults in Induction Motors Using Stator Current Wigner Distributions

Abstract: This paper proposes a novel diagnosis method for detection and discrimination of two typical mechanical failures in induction motors by stator current analysis: load torque oscillations and dynamic rotor eccentricity. A theoretical analysis shows that each fault modulates the stator current in a different way: torque oscillations lead to stator current phase modulation, whereas rotor eccentricities produce stator current amplitude modulation. The use of traditional current spectrum analysis involves identical frequency signatures with the two fault types. A time-frequency analysis of the stator current with the Wigner distribution leads to different fault signatures that can be used for a more accurate diagnosis. The theoretical considerations and the proposed diagnosis techniques are validated on experimental signals.

Mechanical fault detection in induction motor drives through stator current monitoring - Theory and application examples

Abstract: In a wide variety of industrial applications, an increasing demand exists to improve the reliability and availability of induction motor drives. Common failures occurring in such drives can be classified into electrical and mechanical faults (rotor eccentricity, bearing faults, shaft misalignment, load unbalance, gearbox fault or general failure in the load part of the drive). Mechanical faults are most commonly detected through vibration or noise monitoring, but stator current monitoring is an interesting alternative. Indeed, current sensors are cost-effective, easy to implement, and most drives already contain such sensors for protection and control purposes. However, the effects of mechanical faults on the stator currents are more indirect compared to vibration or noise analysis. This work focuses on various aspects of mechanical fault detection through stator current monitoring, starting from a general theoretical analysis to signal processing methods for fault detection and several application examples.

Advances in Diagnostic Techniques for Induction Machines

Abstract: This paper investigates diagnostic techniques for electrical machines with special reference to induction machines and to papers published in the last ten years. A comprehensive list of references is reported and examined, and research activities classified into four main topics: 1) electrical faults; 2) mechanical faults; 3) signal processing for analysis and monitoring; and 4) artificial intelligence and decision-making techniques.

1D Convolutional Neural Networks and Applications: A Survey

Abstract: During the last decade, Convolutional Neural Networks (CNNs) have become the de facto standard for various Computer Vision and Machine Learning operations. CNNs are feed-forward Artificial Neural Networks (ANNs) with alternating convolutional and subsampling layers. Deep 2D CNNs with many hidden layers and millions of parameters have the ability to learn complex objects and patterns providing that they can be trained on a massive size visual database with ground-truth labels. With a proper training, this unique ability makes them the primary tool for various engineering applications for 2D signals such as images and video frames. Yet, this may not be a viable option in numerous applications over 1D signals especially when the training data is scarce or application-specific. To address this issue, 1D CNNs have recently been proposed and immediately achieved the state-of-the-art performance levels in several applications such as personalized biomedical data classification and early diagnosis, structural health monitoring, anomaly detection and identification in power electronics and motor-fault detection. Another major advantage is that a real-time and low-cost hardware implementation is feasible due to the simple and compact configuration of 1D CNNs that perform only 1D convolutions (scalar multiplications and additions). This paper presents a comprehensive review of the general architecture and principals of 1D CNNs along with their major engineering applications, especially focused on the recent progress in this field. Their state-of-the-art performance is highlighted concluding with their unique properties. The benchmark datasets and the principal 1D CNN software used in those applications are also publically shared in a dedicated website.

A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors

Abstract: Medium-voltage (MV) induction motors are widely used in the industry and are essential to industrial processes. The breakdown of these MV motors not only leads to high repair expenses but also causes extraordinary financial losses due to unexpected downtime. To provide reliable condition monitoring and protection for MV motors, this paper presents a comprehensive survey of the existing condition monitoring and protection methods in the following five areas: thermal protection and temperature estimation, stator insulation monitoring and fault detection, bearing fault detection, broken rotor bar/end-ring detection, and air gap eccentricity detection. For each category, the related features of MV motors are discussed; the effectiveness of the existing methods are discussed in terms of their robustness, accuracy, and implementation complexity. Recommendations for the future research in these areas are also presented.