M. E. Leonowicz

Bio: M. E. Leonowicz is an academic researcher from Princeton University. The author has contributed to research in topics: Mesoporous material & Molecular sieve. The author has an hindex of 3, co-authored 3 publications receiving 664 citations.

Effect of surfactant/silica molar ratios on the formation of mesoporous molecular sieves : inorganic mimicry of surfactant liquid-crystal phases and mechanistic implications

Abstract: The influence of surfactant/silica molar ratio (Sur/Si) in the synthesis of mesoporous molecular sieve materials (M41S) was studied in a simple ternary synthesis system containing tetraethylorthosilicate (TEOS), water, and the cetyltrimethylammonium (CTMA) cation at 100{degrees}C. The resulting silicate materials were characterized by X-ray diffraction, {sup 29}Si NMR, and FTIR. As the Sur/Si molar ratio increased from 0.5 to 2, the siliceous products obtained could be classified into four separate groups: MCM-41 (hexagonal), MCM-48 (cubic), thermally unstable M41S, and a molecular species, the cubic octamer [(CTMA)SiO{sub 2.5}]{sub 8}. One of the thermally unstable structures has been identified as a lamellar phase. These results are consistent with known micellar phase transformations that occur at various surfactant concentrations and reinforce the concept that liquid-crystal structures serve as templating agents for the formation of M41S type materials. 48 refs., 13 figs., 5 tabs.

Development of a formation mechanism for M41S materials

Abstract: 1. Summary The influence of surfactant/silica molar ratio(Sur/Si) in M41S syntheses was studied in the simple synthesis system consisting of tetraethylorthosilicate(TEOS), water, and the cetyltrimethylammonium(CTMA) cation at 100°C. As the Sur/Si increased from 0.5 to 2, the siliceous products obtained were identified and could be classified into four separate groups: MCM-4 1(hexagonal), MCM-48(cubic), thermally unstable M4 1 S, and a molecular species, the organic octamer [(CTMA)SiO2, 5]8. One of the thermally unstable structures has been identified as a lamellar phase. These results are consistent with micellar phase transformations that occur at various surfactant concentrations and reinforce the concept that micelle structures serve as templating agents for the formation of M41S type materials.

From Microporous to Mesoporous Molecular-Sieve Materials and Their Use in Catalysis

Abstract: It is possible to say that zeolites are the most widely used catalysts in industry They are crystalline microporous materials which have become extremely successful as catalysts for oil refining, petrochemistry, and organic synthesis in the production of fine and speciality chemicals, particularly when dealing with molecules having kinetic diameters below 10 A The reason for their success in catalysis is related to the following specific features of these materials:1 (1) They have very high surface area and adsorption capacity (2) The adsorption properties of the zeolites can be controlled, and they can be varied from hydrophobic to hydrophilic type materials (3) Active sites, such as acid sites for instance, can be generated in the framework and their strength and concentration can be tailored for a particular application (4) The sizes of their channels and cavities are in the range typical for many molecules of interest (5-12 A), and the strong electric fields2 existing in those micropores together with an electronic confinement of the guest molecules3 are responsible for a preactivation of the reactants (5) Their intricate channel structure allows the zeolites to present different types of shape selectivity, ie, product, reactant, and transition state, which can be used to direct a given catalytic reaction toward the desired product avoiding undesired side reactions (6) All of these properties of zeolites, which are of paramount importance in catalysis and make them attractive choices for the types of processes listed above, are ultimately dependent on the thermal and hydrothermal stability of these materials In the case of zeolites, they can be activated to produce very stable materials not just resistant to heat and steam but also to chemical attacks Avelino Corma Canos was born in Moncofar, Spain, in 1951 He studied chemistry at the Universidad de Valencia (1967−1973) and received his PhD at the Universidad Complutense de Madrid in 1976 He became director of the Instituto de Tecnologia Quimica (UPV-CSIC) at the Universidad Politecnica de Valencia in 1990 His current research field is zeolites as catalysts, covering aspects of synthesis, characterization and reactivity in acid−base and redox catalysis A Corma has written about 250 articles on these subjects in international journals, three books, and a number of reviews and book chapters He is a member of the Editorial Board of Zeolites, Catalysis Review Science and Engineering, Catalysis Letters, Applied Catalysis, Journal of Molecular Catalysis, Research Trends, CaTTech, and Journal of the Chemical Society, Chemical Communications A Corma is coauthor of 20 patents, five of them being for commercial applications He has been awarded with the Dupont Award on new materials (1995), and the Spanish National Award “Leonardo Torres Quevedo” on Technology Research (1996) 2373 Chem Rev 1997, 97, 2373−2419

Gas adsorption characterization of ordered organic-inorganic nanocomposite materials

Abstract: A critical review of adsorption methods that are currently used in the characterization of ordered organic−inorganic nanocomposite materials is presented, and the adsorption methodology that is potentially useful for this characterization, but has not yet been applied, is discussed. The ordered organic−inorganic nanocomposites include surface-functionalized ordered mesoporous materials (OMMs) with siliceous frameworks (synthesized either via postsynthesis surface modification or via direct co-condensation method), periodic mesoporous organosilicas, and surfactant-containing OMMs. This review covers the methods for determination of the specific surface area and pore volume. The available methods for mesopore size analysis are critically compared and evaluated, with special emphasis on the recent developments related to the application of advanced computational methods for studying adsorption in porous media and to the direct modeling of adsorption using highly ordered surface-functionalized OMMs as model a...

Recent Progress in the Synthesis of Porous Carbon Materials

Abstract: In this review, the progress made in the last ten years concerning the synthesis of porous carbon materials is summarized. Porous carbon materials with various pore sizes and pore structures have been synthesized using several different routes. Microporous activated carbons have been synthesized through the activation process. Ordered microporous carbon materials have been synthesized using zeolites as templates. Mesoporous carbons with a disordered pore structure have been synthesized using various methods, including catalytic activation using metal species, carbonization of polymer/polymer blends, carbonization of organic aerogels, and template synthesis using silica nanoparticles. Ordered mesoporous carbons with various pore structures have been synthesized using mesoporous silica materials such as MCM-48, HMS, SBA-15, MCF, and MSU-X as templates. Ordered mesoporous carbons with graphitic pore walls have been synthesized using soft-carbon sources that can be converted to highly ordered graphite at high temperature. Hierarchically ordered mesoporous carbon materials have been synthesized using various designed silica templates. Some of these mesoporous carbon materials have successfully been used as adsorbents for bulky pollutants, as electrodes for supercapacitors and fuel cells, and as hosts for enzyme immobilization. Ordered macroporous carbon materials have been synthesized using colloidal crystals as templates. One-dimensional carbon nanostructured materials have been fabricated using anodic aluminum oxide (AAO) as a template.

Surfactant Control of Phases in the Synthesis of Mesoporous Silica-Based Materials

Abstract: The low-temperature formation of liquid-crystal-like arrays made up of molecular complexes formed between molecular inorganic species and amphiphilic organic molecules is a convenient approach for the synthesis of mesostructure materials. This paper examines how the molecular shapes of covalent organosilanes, quaternary ammonium surfactants, and mixed surfactants in various reaction conditions can be used to synthesize silica-based mesophase configurations, MCM-41 (2d hexagonal, p6m), MCM-48 (cubic Ia3d), MCM-50 (lamellar), SBA-1 (cubic Pm3n), SBA-2 (3d hexagonal P63/mmc), and SBA-3 (hexagonal p6m from acidic synthesis media). The structural function of surfactants in mesophase formation can to a first approximation be related to that of classical surfactants in water or other solvents with parallel roles for organic additives. The effective surfactant ion pair packing parameter, g = V/a0l, remains a useful molecular structure-directing index to characterize the geometry of the mesophase products, and pha...