scispace - formally typeset
Search or ask a question
Author

M. Fakoor-Pakdaman

Bio: M. Fakoor-Pakdaman is an academic researcher from Simon Fraser University. The author has contributed to research in topics: Heat transfer coefficient & Heat transfer. The author has an hindex of 8, co-authored 18 publications receiving 281 citations. Previous affiliations of M. Fakoor-Pakdaman include British Columbia Institute of Technology & Texas A&M University.

Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, an experimental study was carried out on heat transfer characteristics of a nano-refrigerant flow during condensation inside a horizontal smooth tube, and significant heat transfer enhancement was achieved by adding nanoparticles to the baseline mixture and pure refrigerant.

78 citations

Journal ArticleDOI
TL;DR: In this paper, the authors investigated the pressure drop characteristics of nanofluid flow inside vertical helically coiled tubes for the laminar flow regime and proposed rough correlations to predict their thermo-physical properties.

63 citations

Journal ArticleDOI
TL;DR: In this paper, an experimental investigation is carried out to study the condensation and pressure drop characteristics of R-600a inside a helical tube-in-tube heat exchanger.

42 citations

Journal ArticleDOI
TL;DR: In this paper, the authors investigated the convective heat transfer and friction factor of MWCNT-water nanofluids inside a vertical circular tube and proposed two correlations to predict the Nusselt number and the friction factor.

28 citations

Journal ArticleDOI
TL;DR: In this article, an experimental investigation is carried out to study the heat transfer and pressure drop characteristics of multiwalled carbon nanotubes (MWCNTs)/heat transfer oil nanofluid flows inside horizontal corrugated tubes under uniform wall temperature condition.
Abstract: An experimental investigation is carried out to study the heat transfer and pressure drop characteristics of multiwalled carbon nanotubes (MWCNTs)/heat transfer oil nanofluid flows inside horizontal corrugated tubes under uniform wall temperature condition. To provide the applied nanafluids, MWCNTs are dispersed in heat transfer oil with mass concentrations of 0.05, 0.1, and 0.2 wt%. The Reynolds number varies between 100 and 4,000. Three tubes with hydraulic diameters of 11.9, 13.2, and 15.5 mm are applied as the test section in the experimental setup. Tubes are corrugated four times on the cross section; that is, there are four different helices around the tube. Depths of the corrugations are chosen as 0.9, 1.1, and 1.3 mm, and pitch of corrugation is 14 mm. The acquired data confirm the increase of heat transfer rate as a result of utilizing nanofluids in comparison with the base fluid flow. However, corrugating the tubes decreases the heat transfer rate at low Reynolds numbers. The highest increase in...

27 citations


Cited by
More filters
01 Jan 2007

1,932 citations

Book ChapterDOI
01 Jan 2022

818 citations

Book ChapterDOI
28 Jan 2005
TL;DR: The Q12-40 density: ρ ((kg/m) specific heat: Cp (J/kg ·K) dynamic viscosity: ν ≡ μ/ρ (m/s) thermal conductivity: k, (W/m ·K), thermal diffusivity: α, ≡ k/(ρ · Cp) (m /s) Prandtl number: Pr, ≡ ν/α (−−) volumetric compressibility: β, (1/K).
Abstract: Geometry: shape, size, aspect ratio and orientation Flow Type: forced, natural, laminar, turbulent, internal, external Boundary: isothermal (Tw = constant) or isoflux (q̇w = constant) Fluid Type: viscous oil, water, gases or liquid metals Properties: all properties determined at film temperature Tf = (Tw + T∞)/2 Note: ρ and ν ∝ 1/Patm ⇒ see Q12-40 density: ρ ((kg/m) specific heat: Cp (J/kg ·K) dynamic viscosity: μ, (N · s/m) kinematic viscosity: ν ≡ μ/ρ (m/s) thermal conductivity: k, (W/m ·K) thermal diffusivity: α, ≡ k/(ρ · Cp) (m/s) Prandtl number: Pr, ≡ ν/α (−−) volumetric compressibility: β, (1/K)

636 citations

01 Jan 2014
TL;DR: Better known for free eBooks in the category of information technology research, case studies, eBooks, Magazines and white papers, there is a lot more that you can explore on this site.
Abstract: If you have an eBook, video tutorials, or other books that can help others, KnowFree is the right platform to share and exchange the eBooks freely. While you can help each other with these eBooks for educational needs, it also helps for self-practice. Better known for free eBooks in the category of information technology research, case studies, eBooks, Magazines and white papers, there is a lot more that you can explore on this site.

402 citations

Journal ArticleDOI
TL;DR: In this article, the authors present the outputs for nano-refrigerant (R600a/oil/CuO) boiling heat transfer within flattened channels utilizing experimental method The influence of flattened percentage, flow rate, vapor quality as well as the mass fraction of CuO on boiling heat Transfer (h) were discussed Outcomes reveal that increasing the flattened percentage enhances the h Also, within the ranges of present experiment, h augments by increasing nanoparticle's concentration.

257 citations