scispace - formally typeset
Search or ask a question
Author

M. Figlarz

Other affiliations: University of Paris
Bio: M. Figlarz is an academic researcher from University of Picardie Jules Verne. The author has contributed to research in topics: Hydrate & Nickel. The author has an hindex of 17, co-authored 32 publications receiving 3664 citations. Previous affiliations of M. Figlarz include University of Paris.
Topics: Hydrate, Nickel, Particle size, Pyrochlore, Dispersity

Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the infrared and Raman spectra of powder samples of WO3 (monoclinic and hexagonal) and XH 2 O (x = 1,2, 1 3 ) have been recorded and the most characteristic vibrations are discussed with reference to the available structural data.

856 citations

Journal ArticleDOI
TL;DR: In this article, a general reaction on model has been established with a reaction via the solution: dissolution of the solid precursor; reduction in solution; homogeneous nucleation and growth of the metallic phase from the solution.

731 citations

Journal ArticleDOI
TL;DR: In this paper, the authors developed a new process for preparing finely divided metal powders of easily reducible metals (such as precious metals and copper) by precipitation in liquid polyols.
Abstract: One of the newer tendencies in materials science has been to tailor-make classical products (long associated with old applications) with controlled properties for special uses, especially in high technology. Preparing dispersed systems in which all particles have nearly uniform size (monodisperse solids) is a typical example. This goal can be achieved in some cases through cleverly controlled particle growth from a liquid medium. Examples of such preparations include gold colloids prepared by Zsigmondy and later by Turkevich et al., sulfur sols obtained by LaMer, metal oxides and hydrous oxides prepared by Matijevic et al., silica, etc. These dispersions have been used either to check theories of colloid science, or to a lesser extent, for industrial purposes. In the case of fine metal particles, a uniform size distribution associated with a low degree of agglomeration, and sometimes the spherical shape, appear as particularly convenient characteristics for certain applications. The production of conductive inks or pastes for electronic materials and for the preparation of conductive paints are particularly good examples.In so-called thick film technology, conductive inks and pastes are screen printed on a ceramic substrate in order to form, after firing, a conductive film with a thickness less than 10 μm. This technique is, for instance, used to form the network in hybrid integrated circuits or the internal electrodes of multilayer ceramic capacitors.Metallic powders in thick film compositions are usually precious metals (Au, Ag, Pt, Pd), their mixtures, or alloys. Cheaper metals such as copper or nickel are tested and may be potential substitutes for precious metals in different specific applications. Powders for thick film composition are mainly obtained through chemical precipitation from aqueous or organic solutions, which yield high purity powders. Modification of precipitation parameters (such as the nature and the concentration of the starting metallic compound and of the reducing agent, reaction temperature, viscosity of the medium) and the addition of additives and surfactants, can often be used to control particle size and agglomeration.Over the past few years, we have developed a new process for preparing finely divided metal powders of easily reducible metals (such as precious metals and copper) or less reducible metals (such as cobalt, nickel, cadmium, or lead) by precipitation in liquid polyols. This reaction will be used as an example in order to discuss the mechanism of formation of uniform micrometer and submicrometer size metal particles by precipitation reactions.

520 citations

Journal ArticleDOI
TL;DR: In this article, the infrared and Raman spectra of powder samples of MoO3 (orthorhombic and monoclinic) and MoO 3 · x H 2 O (x = 1 3, 1 2, 1 and 2) have been recorded.

437 citations

Journal ArticleDOI
TL;DR: In this paper, fine silver particles of uniform size and shape have been synthesized from silver nitrate in hot ethylene glycol and polyvinylpirrolidone (PVP) was added to the system.

239 citations


Cited by
More filters
Journal ArticleDOI
13 Dec 2002-Science
TL;DR: Monodisperse samples of silver nanocubes were synthesized in large quantities by reducing silver nitrate with ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP), characterized by a slightly truncated shape bounded by {100, {110}, and {111} facets.
Abstract: Monodisperse samples of silver nanocubes were synthesized in large quantities by reducing silver nitrate with ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP). These cubes were single crystals and were characterized by a slightly truncated shape bounded by {100}, {110}, and {111} facets. The presence of PVP and its molar ratio (in terms of repeating unit) relative to silver nitrate both played important roles in determining the geometric shape and size of the product. The silver cubes could serve as sacrificial templates to generate single-crystalline nanoboxes of gold: hollow polyhedra bounded by six {100} and eight {111} facets. Controlling the size, shape, and structure of metal nanoparticles is technologically important because of the strong correlation between these parameters and optical, electrical, and catalytic properties.

5,992 citations

Journal ArticleDOI
TL;DR: Practical Interests of Magnetic NuclearRelaxation for the Characterization of Superparamagnetic Colloid, and Use of Nanoparticles as Contrast Agents forMRI20825.
Abstract: 1. Introduction 20642. Synthesis of Magnetic Nanoparticles 20662.1. Classical Synthesis by Coprecipitation 20662.2. Reactions in Constrained Environments 20682.3. Hydrothermal and High-TemperatureReactions20692.4. Sol-Gel Reactions 20702.5. Polyol Methods 20712.6. Flow Injection Syntheses 20712.7. Electrochemical Methods 20712.8. Aerosol/Vapor Methods 20712.9. Sonolysis 20723. Stabilization of Magnetic Particles 20723.1. Monomeric Stabilizers 20723.1.1. Carboxylates 20733.1.2. Phosphates 20733.2. Inorganic Materials 20733.2.1. Silica 20733.2.2. Gold 20743.3. Polymer Stabilizers 20743.3.1. Dextran 20743.3.2. Polyethylene Glycol (PEG) 20753.3.3. Polyvinyl Alcohol (PVA) 20753.3.4. Alginate 20753.3.5. Chitosan 20753.3.6. Other Polymers 20753.4. Other Strategies for Stabilization 20764. Methods of Vectorization of the Particles 20765. Structural and Physicochemical Characterization 20785.1. Size, Polydispersity, Shape, and SurfaceCharacterization20795.2. Structure of Ferro- or FerrimagneticNanoparticles20805.2.1. Ferro- and Ferrimagnetic Nanoparticles 20805.3. Use of Nanoparticles as Contrast Agents forMRI20825.3.1. High Anisotropy Model 20845.3.2. Small Crystal and Low Anisotropy EnergyLimit20855.3.3. Practical Interests of Magnetic NuclearRelaxation for the Characterization ofSuperparamagnetic Colloid20855.3.4. Relaxation of Agglomerated Systems 20856. Applications 20866.1. MRI: Cellular Labeling, Molecular Imaging(Inflammation, Apoptose, etc.)20866.2.

5,915 citations

Journal ArticleDOI
Shouheng Sun1, Christopher B. Murray1, Dieter Weller1, Liesl Folks1, Andreas Moser1 
17 Mar 2000-Science
TL;DR: Thermal annealing converts the internal particle structure from a chemically disordered face- centered cubic phase to the chemically ordered face-centered tetragonal phase and transforms the nanoparticle superlattices into ferromagnetic nanocrystal assemblies that can support high-density magnetization reversal transitions.
Abstract: Synthesis of monodisperse iron-platinum (FePt) nanoparticles by reduction of platinum acetylacetonate and decomposition of iron pentacarbonyl in the presence of oleic acid and oleyl amine stabilizers is reported. The FePt particle composition is readily controlled, and the size is tunable from 3- to 10-nanometer diameter with a standard deviation of less than 5%. These nanoparticles self-assemble into three-dimensional superlattices. Thermal annealing converts the internal particle structure from a chemically disordered face-centered cubic phase to the chemically ordered face-centered tetragonal phase and transforms the nanoparticle superlattices into ferromagnetic nanocrystal assemblies. These assemblies are chemically and mechanically robust and can support high-density magnetization reversal transitions.

5,568 citations

Journal ArticleDOI
TL;DR: The development of novel materials is a fundamental focal point of chemical research; and this interest is mandated by advancements in all areas of industry and technology.
Abstract: The development of novel materials is a fundamental focal point of chemical research; and this interest is mandated by advancements in all areas of industry and technology. A good example of the synergism between scientific discovery and technological development is the electronics industry, where discoveries of new semiconducting materials resulted in the evolution from vacuum tubes to diodes and transistors, and eventually to miniature chips. The progression of this technology led to the development * To whom correspondence should be addressed. B.L.C.: (504) 2801385 (phone); (504) 280-3185 (fax); bcushing@uno.edu (e-mail). C.J.O.: (504)280-6846(phone);(504)280-3185(fax);coconnor@uno.edu (e-mail). 3893 Chem. Rev. 2004, 104, 3893−3946

2,621 citations