M. Inbasekaran

Bio: M. Inbasekaran is an academic researcher from Dow Chemical Company. The author has contributed to research in topics: Polyfluorene & Electroluminescence. The author has an hindex of 26, co-authored 37 publications receiving 9730 citations.

High-Resolution Inkjet Printing of All-Polymer Transistor Circuits

Abstract: Direct printing of functional electronic materials may provide a new route to low-cost fabrication of integrated circuits. However, to be useful it must allow continuous manufacturing of all circuit components by successive solution deposition and printing steps in the same environment. We demonstrate direct inkjet printing of complete transistor circuits, including via-hole interconnections based on solution-processed polymer conductors, insulators, and self-organizing semiconductors. We show that the use of substrate surface energy patterning to direct the flow of water-based conducting polymer inkjet droplets enables high-resolution definition of practical channel lengths of 5 micrometers. High mobilities of 0.02 square centimeters per volt second and on-off current switching ratios of 10 5 were achieved.

Progress with Light-Emitting Polymers

Abstract: Light-emitting polymers have been studied intensively as materials for light-emitting diodes (LEDs). Here research efforts toward developing these materials for commercial applications are reviewed. The Figure shows the preferred two-layer device structure for commercial polymer LEDs as well as polyfluorene, one of the polymers discussed.

Mobility enhancement in conjugated polymer field-effect transistors through chain alignment in a liquid-crystalline phase

Abstract: A method is demonstrated by which liquid-crystalline self-organization in rigid-rod nematic conjugated polymers can be used to control the microstructure of the active semiconducting layer in solution-processed polymer thin-film transistors (TFTs). Enhanced charge carrier mobilities of 0.01–0.02 cm2/V s and good operating stability have been achieved in polyfluorene copolymer TFTs by preparing the polymer in a nematic glassy state and by aligning the polymer chains parallel to the transport direction with the help of an alignment layer. Mobility anisotropies of 5–8 for current flow parallel and perpendicular to the alignment direction have been observed that are of the same order of magnitude as optical dichroic ratios.

Electrochemical determination of the ionization potential and electron affinity of poly(9,9-dioctylfluorene)

Abstract: We report cyclic voltammetry measurements for the blue electroluminescent conjugated polymer poly(9,9-dioctylfluorene). Both oxidation and reduction potentials are determined and thus estimates of both the ionization potential Ip and electron affinity Ea of the polymer are obtained for the same sample under the same experimental conditions. We estimate Ip=5.80 eV and Ea=2.12 eV. These results disagree with the common assumption that Ea is, to good approximation, given by the difference between Ip and the optical gap. Measurements on indium tin oxide/polyfluorene/calcium light emitting diode structures are consistent with the deductions from the electrochemical data.

High brightness and efficiency blue light-emitting polymer diodes

Abstract: Efficient blue electroluminescence, peaked at 436 nm, is demonstrated from polymer light-emitting diodes operating at high brightness A dioctyl-substituted polyfluorene was used as the emissive layer in combination with a polymeric triphenyldiamine hole transport layer The luminance reaches 600 cd/m2 at a current density of 150 mA/cm2 for a bias voltage of 20 V, corresponding to an efficiency of 025 cd/A and a luminosity of 004 lm/W These values are optimized at a critical emissive layer thickness

Conjugated polymer-based organic solar cells

Abstract: The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.

Electroluminescence in conjugated polymers

Abstract: Research in the use of organic polymers as the active semiconductors in light-emitting diodes has advanced rapidly, and prototype devices now meet realistic specifications for applications. These achievements have provided insight into many aspects of the background science, from design and synthesis of materials, through materials fabrication issues, to the semiconductor physics of these polymers.

The path to ubiquitous and low-cost organic electronic appliances on plastic

Abstract: Organic electronics are beginning to make significant inroads into the commercial world, and if the field continues to progress at its current, rapid pace, electronics based on organic thin-film materials will soon become a mainstay of our technological existence. Already products based on active thin-film organic devices are in the market place, most notably the displays of several mobile electronic appliances. Yet the future holds even greater promise for this technology, with an entirely new generation of ultralow-cost, lightweight and even flexible electronic devices in the offing, which will perform functions traditionally accomplished using much more expensive components based on conventional semiconductor materials such as silicon.

Organic Thin Film Transistors for Large Area Electronics

Abstract: Organic thin-film transistors (OTFTs) have lived to see great improvements in recent years. This review presents new insight into conduction mechanisms and performance characteristics, as well as opportunities for modeling properties of OTFTs. The shifted focus in research from novel chemical structures to fabrication technologies that optimize morphology and structural order is underscored by chapters on vacuum-deposited and solution-processed organic semiconducting films. Finally, progress in the growing field of the n-type OTFTs is discussed in ample detail. The Figure, showing a pentacene film edge on SiO2, illustrates the morphology issue.

Synthesis of Conjugated Polymers for Organic Solar Cell Applications

Abstract: -phenylenevinylene)s L4. Fluorene-Based Conjugated Polymers L4.1. Fluorene-Based Copolymers ContainingElectron-Rich MoietiesM4.2. Fluorene-Based Copolymers ContainingElectron-Deficient MoietiesN4.3. Fluorene-Based Copolymers ContainingPhosphorescent ComplexesQ5. Carbazole-Based Conjugated Polymers R5.1. Poly(2,7-carbazole)-Based Polymers R5.2. Indolo[3,2-