M. J. Ludowise

Bio: M. J. Ludowise is an academic researcher from Hewlett-Packard. The author has contributed to research in topics: Light-emitting diode & Superlattice. The author has an hindex of 18, co-authored 29 publications receiving 3199 citations.

Illumination with solid state lighting technology

Abstract: High-power light-emitting diodes (LEDs) have begun to differentiate themselves from their more common cousins the indicator LED. Today these LEDs are designed to generate 10-100 lm per LED with efficiencies that surpass incandescent and halogen bulbs. After a summary of the motivation for the development of the high-power LED and a look at the future markets, we describe the current state of high-power LED technology and the challenges that lay ahead for development of a true "solid state lamp." We demonstrate record performance and reliability for high-power colored and white LEDs and show results from the worlds first 100-plus lumen white LED lamp, the solid state equivalent of Thomas Edison's 20-W incandescent lightbulb approximately one century later.

High-power AlGaInN flip-chip light-emitting diodes

Abstract: Data are presented on high-power AlGaInN flip-chip light-emitting diodes (FCLEDs). The FCLED is “flipped-over” or inverted compared to conventional AlGaInN light-emitting diodes (LEDs), and light is extracted through the transparent sapphire substrate. This avoids light absorption from the semitransparent metal contact in conventional epitaxial-up designs. The power FCLED has a large emitting area (∼0.70 mm2) and an optimized contacting scheme allowing high current (200–1000 mA, J∼30–143 A/cm2) operation with low forward voltages (∼2.8 V at 200 mA), and therefore higher power conversion (“wall-plug”) efficiencies. The improved extraction efficiency of the FCLED provides 1.6 times more light compared to top-emitting power LEDs and ten times more light than conventional small-area (∼0.07 mm2) LEDs. FCLEDs in the blue wavelength regime (∼435 nm peak) exhibit ∼21% external quantum efficiency and ∼20% wall-plug efficiency at 200 mA and with record light output powers of 400 mW at 1.0 A.

Correlation of cathodoluminescence inhomogeneity with microstructural defects in epitaxial gan grown by metalorganic chemical-vapor deposition

Abstract: We discuss the relationship between microstructure and luminescence efficiency for heteroepitaxial films of GaN grown on c-axis sapphire substrates by metalorganic chemical-vapor deposition. We directly characterize the correlation between threading dislocations as observed by transmission electron microscopy, surface morphology as observed by atomic force microscopy, and wavelength-resolved cathodoluminescence imaging. We show that the inhomogeneity in the luminescence intensity of these films near band edge can be accounted for by a simple model where nonradiative recombination at threading dislocations causes a deficiency of minority carriers and results in dark regions of the epilayer. An upper bound for average diffusion length is estimated to be 250 nm.

High Power LEDs - Technology Status and Market Applications

Abstract: High power light emitting diodes (LEDs) continue to increase in output flux with the best III-nitride based devices today emitting over 150 lm of white, cyan, or green light. The key design features of such products will be covered with special emphasis on power packaging, flip-chip device design, and phosphor coating technology. The high-flux performance of these devices is enabling many new applications for LEDs. Two of the most interesting of these applications are LCD display backlighting and vehicle forward lighting. The advantages of LEDs over competing lighting technologies will be covered in detail.

A study of parasitic reactions between NH 3 and TMGa or TMAl

Abstract: The growth of AlGaN using organometallic vapor phase epitaxy has been studied as a function of reactor pressure in a horizontal reactor. At atmospheric pressure, GaN with growth efficiency comparable to that of GaAs in the same reactor is obtained. In addition, the GaN growth efficiency changes little at different reactor pressures. These results indicate that the parasitic reaction between TMGa and NH3 is not substantial in the reactor used in this study. On the other hand, A1N growth at atmospheric pressure has not been possible. By lowering the reactor pressure below 250 Torr, A1N deposition is achieved. However, the growth efficiency decreases at higher reactor pressures and higher growth temperatures, indicating that a strong parasitic reaction occurs between TMAI and NH3. For the ternary AlGaN, lower pressure also leads to more Al incorporation. The results indicate that parasitic reactions are much more severe for TMAI+NH3 than for TMGa+NH3.

Recent Advances in Two-Dimensional Materials beyond Graphene

Abstract: The isolation of graphene in 2004 from graphite was a defining moment for the “birth” of a field: two-dimensional (2D) materials In recent years, there has been a rapidly increasing number of papers focusing on non-graphene layered materials, including transition-metal dichalcogenides (TMDs), because of the new properties and applications that emerge upon 2D confinement Here, we review significant recent advances and important new developments in 2D materials “beyond graphene” We provide insight into the theoretical modeling and understanding of the van der Waals (vdW) forces that hold together the 2D layers in bulk solids, as well as their excitonic properties and growth morphologies Additionally, we highlight recent breakthroughs in TMD synthesis and characterization and discuss the newest families of 2D materials, including monoelement 2D materials (ie, silicene, phosphorene, etc) and transition metal carbide- and carbon nitride-based MXenes We then discuss the doping and functionalization of 2

White Organic Light‐Emitting Devices for Solid‐State Lighting

Abstract: White organic light-emitting devices (WOLEDs) have advanced over the last twelve years to the extent that these devices are now being considered as efficient solid-state lighting sources. Initially, WOLEDs were targeted towards display applications for use primarily as liquid-crystal display backlights. Now, their power efficiencies have surpassed those of incandescent sources due to improvements in device architectures, synthesis of novel materials, and the incorporation of electrophosphorescent emitters. This review discusses the advantages and disadvantages of several WOLED architectures in terms of efficiency and color quality. Hindrances to their widespread acceptance as solid-state lighting sources are also noted.

Status and Future of High-Power Light-Emitting Diodes for Solid-State Lighting

Abstract: Status and future outlook of III-V compound semiconductor visible-spectrum light-emitting diodes (LEDs) are presented. Light extraction techniques are reviewed and extraction efficiencies are quantified in the 60%+ (AlGaInP) and ~80% (InGaN) regimes for state-of-the-art devices. The phosphor-based white LED concept is reviewed and recent performance discussed, showing that high-power white LEDs now approach the 100-lm/W regime. Devices employing multiple phosphors for "warm" white color temperatures (~3000-4000 K) and high color rendering (CRI>80), which provide properties critical for many illumination applications, are discussed. Recent developments in chip design, packaging, and high current performance lead to very high luminance devices (~50 Mcd/m2 white at 1 A forward current in 1times1 mm2 chip) that are suitable for application to automotive forward lighting. A prognosis for future LED performance levels is considered given further improvements in internal quantum efficiency, which to date lag achievements in light extraction efficiency for InGaN LEDs

Phosphors in phosphor-converted white light-emitting diodes: Recent advances in materials, techniques and properties

Abstract: Phosphor-converted white light-emitting diodes (pc-WLEDs) are emerging as an indispensable solid-state light source for the next generation lighting industry and display systems due to their unique properties including but not limited to energy savings, environment-friendliness, small volume, and long persistence. Until now, major challenges in pc-WLEDs have been to achieve high luminous efficacy, high chromatic stability, brilliant color-rending properties, and price competitiveness against fluorescent lamps, which rely critically on the phosphor properties. A comprehensive understanding of the nature and limitations of phosphors and the factors dominating the general trends in pc-WLEDs is of fundamental importance for advancing technological applications. This report aims to provide the most recent advances in the synthesis and application of phosphors for pc-WLEDs with emphasis specifically on: (a) principles to tune the excitation and emission spectra of phosphors: prediction according to crystal field theory, and structural chemistry characteristics (e.g. covalence of chemical bonds, electronegativity, and polarization effects of element); (b) pc-WLEDs with phosphors excited by blue-LED chips: phosphor characteristics, structure, and activated ions (i.e. Ce 3+ and Eu 2+ ), including YAG:Ce, other garnets, non-garnets, sulfides, and (oxy)nitrides; (c) pc-WLEDs with phosphors excited by near ultraviolet LED chips: single-phased white-emitting phosphors (e.g. Eu 2+ –Mn 2+ activated phosphors), red-green-blue phosphors, energy transfer, and mechanisms involved; and (d) new clues for designing novel high-performance phosphors for pc-WLEDs based on available LED chips. Emphasis shall also be placed on the relationships among crystal structure, luminescence properties, and device performances. In addition, applications, challenges and future advances of pc-WLEDs will be discussed.

Gan : processing, defects, and devices

Abstract: The role of extended and point defects, and key impurities such as C, O, and H, on the electrical and optical properties of GaN is reviewed. Recent progress in the development of high reliability contacts, thermal processing, dry and wet etching techniques, implantation doping and isolation, and gate insulator technology is detailed. Finally, the performance of GaN-based electronic and photonic devices such as field effect transistors, UV detectors, laser diodes, and light-emitting diodes is covered, along with the influence of process-induced or grown-in defects and impurities on the device physics.