1. Introduction. 2. Linear Algebra. 3. Linear Systems. 4. H2 and Ha Spaces. 5. Internal Stability. 6. Performance Specifications and Limitations. 7. Balanced Model Reduction. 8. Uncertainty and Robustness. 9. Linear Fractional Transformation. 10. m and m- Synthesis. 11. Controller Parameterization. 12. Algebraic Riccati Equations. 13. H2 Optimal Control. 14. Ha Control. 15. Controller Reduction. 16. Ha Loop Shaping. 17. Gap Metric and ...u- Gap Metric. 18. Miscellaneous Topics. Bibliography. Index.

/pdf/essentials-of-robust-control-3kaks6yk3h.pdf

Essentials of Robust Control

Electrical energy storage technologies for stationary applications are reviewed. Particular attention is paid to pumped hydroelectric storage, compressed air energy storage, battery, flow battery, fuel cell, solar fuel, superconducting magnetic energy storage, flywheel, capacitor/supercapacitor, and thermal energy storage. Comparison is made among these technologies in terms of technical characteristics, applications and deployment status.

http://promexico.me/Rubenius/WhitePapers/sdarticle%20(1).pdf

Progress in electrical energy storage system: A critical review

This article surveyed the major results in iterative learning control (ILC) analysis and design over the past two decades. Problems in stability, performance, learning transient behavior, and robustness were discussed along with four design techniques that have emerged as among the most popular. The content of this survey was selected to provide the reader with a broad perspective of the important ideas, potential, and limitations of ILC. Indeed, the maturing field of ILC includes many results and learning algorithms beyond the scope of this survey. Though beginning its third decade of active research, the field of ILC shows no sign of slowing down.

A survey of iterative learning control

Pedestrians follow different trajectories to avoid obstacles and accommodate fellow pedestrians. Any autonomous vehicle navigating such a scene should be able to foresee the future positions of pedestrians and accordingly adjust its path to avoid collisions. This problem of trajectory prediction can be viewed as a sequence generation task, where we are interested in predicting the future trajectory of people based on their past positions. Following the recent success of Recurrent Neural Network (RNN) models for sequence prediction tasks, we propose an LSTM model which can learn general human movement and predict their future trajectories. This is in contrast to traditional approaches which use hand-crafted functions such as Social forces. We demonstrate the performance of our method on several public datasets. Our model outperforms state-of-the-art methods on some of these datasets. We also analyze the trajectories predicted by our model to demonstrate the motion behaviour learned by our model.

/pdf/social-lstm-human-trajectory-prediction-in-crowded-spaces-wwxok9svq7.pdf

Social LSTM: Human Trajectory Prediction in Crowded Spaces

Reinforcement learning offers to robotics a framework and set of tools for the design of sophisticated and hard-to-engineer behaviors. Conversely, the challenges of robotic problems provide both inspiration, impact, and validation for developments in reinforcement learning. The relationship between disciplines has sufficient promise to be likened to that between physics and mathematics. In this article, we attempt to strengthen the links between the two research communities by providing a survey of work in reinforcement learning for behavior generation in robots. We highlight both key challenges in robot reinforcement learning as well as notable successes. We discuss how contributions tamed the complexity of the domain and study the role of algorithms, representations, and prior knowledge in achieving these successes. As a result, a particular focus of our paper lies on the choice between model-based and model-free as well as between value-function-based and policy-search methods. By analyzing a simple problem in some detail we demonstrate how reinforcement learning approaches may be profitably applied, and we note throughout open questions and the tremendous potential for future research.

/pdf/reinforcement-learning-in-robotics-a-survey-4w4397qx9i.pdf

Reinforcement learning in robotics: A survey

The design of a cooperative adaptive cruise-control (CACC) system and its practical validation are presented. Focusing on the feasibility of implementation, a decentralized controller design with a limited communication structure is proposed (in this case, a wireless communication link with the nearest preceding vehicle only). A necessary and sufficient frequency-domain condition for string stability is derived, taking into account heterogeneous traffic, i.e., vehicles with possibly different characteristics. For a velocity-dependent intervehicle spacing policy, it is shown that the wireless communication link enables driving at small intervehicle distances, whereas string stability is guaranteed. For a constant velocity-independent intervehicle spacing, string stability cannot be guaranteed. To validate the theoretical results, experiments are performed with two CACC-equipped vehicles. Implementation of the CACC system, the string-stability characteristics of the practical setup, and experimental results are discussed, indicating the advantages of the design over standard adaptive-cruise-control functionality.

String-Stable CACC Design and Experimental Validation: A Frequency-Domain Approach

In the near future, a significant increase in electric power consumption in vehicles is expected. To limit the associated increase in fuel consumption and exhaust emissions, smart strategies for the generation, storage/retrieval, distribution, and consumption of electric power will be used. Inspired by the research on energy management for hybrid electric vehicles (HEVs), this paper presents an extensive study on controlling the vehicular electric power system to reduce the fuel use and emissions, by generating and storing electrical energy only at the most suitable moments. For this purpose, both off-line optimization methods using knowledge of the driving pattern and on-line implementable ones are developed and tested in a simulation environment. Results show a reduction in fuel use of 2%, even without a prediction of the driving cycle being used. Simultaneously, even larger reductions of the emissions are obtained. The strategies can also be applied to a mild HEV with an integrated starter alternator (ISA), without modifications, or to other types of HEVs with slight changes in the formulation.

http://www.mate.tue.nl/mate/pdfs/5064.pdf

Energy management strategies for vehicular electric power systems

In this paper we describe the hitherto unravelled facts on the interactions of a cold atmospheric plasma with living cells and tissues. A specially designed source, plasma needle, is a low-power discharge, which operates under the threshold of tissue damage. When applied properly, the needle does not cause fatal cell injury which would result in cell death (necrosis). Instead, it allows precise and localized cell removal by means of the so-called cell detachment. In addition, plasma can be used for bacterial disinfection. Because of mild treatment conditions, plasma disinfection can be performed in vivo, e.g. on wounds and dental cavities. Presently, one strives to obtain a better control of the operating device. Therefore, plasma has been characterized using a variety of diagnostics, and a smart system has been designed for the positioning of the device with respect to the treated surface.

https://iopscience.iop.org/article/10.1088/0963-0252/15/4/S03/pdf

Plasma needle for in vivo medical treatment: recent developments and perspectives

http://www.mate.tue.nl/mate/pdfs/2041.pdf

M Maarten Steinbuch

Papers

String-Stable CACC Design and Experimental Validation: A Frequency-Domain Approach

Energy management strategies for vehicular electric power systems

Plasma needle for in vivo medical treatment: recent developments and perspectives

Brief Repetitive control for systems with uncertain period-time

A fast algorithm to computer the H ∞ -norm of a transfer function matrix