The term microfibril angle (MFA) in wood science refers to the angle between the direction of the helical windings of cellulose microfibrils in the secondary cell wall of fibres and tracheids and the long axis of cell. Technologically, it is usually applied to the orientation of cellulose microfibrils in the S2 layer that makes up the greatest proportion of the wall thickness, since it is this which most affects the physical properties of wood. This review describes the organisation of the cellulose component of the secondary wall of fibres and tracheids and the various methods that have been used for the measurement of MFA. It considers the variation of MFA within the tree and the biological reason for the large differences found between juvenile (or core) wood and mature (or outer) wood. The ability of the tree to vary MFA in response to environmental stress, particularly in reaction wood, is also described. Differences in MFA have a profound effect on the properties of wood, in particular its stiffness. The large MFA in juvenile wood confers low stiffness and gives the sapling the flexibility it needs to survive high winds without breaking. It also means, however, that timber containing a high proportion of juvenile wood is unsuitable for use as high-grade structural timber. This fact has taken on increasing importance in view of the trend in forestry towards short rotation cropping of fast grown species. These trees at harvest may contain 50% or more of timber with low stiffness and therefore, low economic value. Although they are presently grown mainly for pulp, pressure for increased timber production means that ways will be sought to improve the quality of their timber by reducing juvenile wood MFA. The mechanism by which the orientation of microfibril deposition is controlled is still a matter of debate. However, the application of molecular techniques is likely to enable modification of this process. The extent to which these techniques should be used to improve timber quality by reducing MFA in juvenile wood is, however, uncertain, since care must be taken to avoid compromising the safety of the tree.

Cellulose microfibril angle in the cell wall of wood fibres

Microfibril angle (MFA) is perhaps the easiest ultrastructural variable to measure for wood cell walls, and certainly the only such variable that has been measured on a large scale. Because cellulose is crystalline, the MFA of the S2 layer can be measured by X-ray diffraction. Automated X-ray scanning devices such as SilviScan have produced large datasets for a range of timber species using increment core samples. In conifers, microfibril angles are large in the juvenile wood and small in the mature wood. MFA is larger at the base of the tree for a given ring number from the pith, and decreases with height, increasing slightly at the top tree. In hardwoods, similar patterns occur, but with much less variation and much smaller microfibril angles in juvenile wood. MFA has significant heritability, but is also influenced by environmental factors as shown by its increased values in compression wood, decreased values in tension wood and, often, increased values following nutrient or water supplementation. Adjacent individual tracheids can show moderate differences in MFA that may be related to tracheid length, but not to lumen diameter or cell wall thickness. While there has been strong interest in the MFA of the S2 layer, which dominates the axial stiffness properties of tracheids and fibres, there has been little attention given to the microfibril angles of S1 and S3 layers, which may influence collapse resistance and other lateral properties. Such investigations have been limited by the much greater difficulty of measuring angles for these wall layers. MFA, in combination with basic density, shows a strong relationship to longitudinal modulus of elasticity, and to longitudinal shrinkage, which are the main reasons for interest in this cell wall property in conifers. In hardwoods, MFA is of more interest in relation to growth stress and shrinkage behaviour.

/pdf/microfibril-angle-measurement-variation-and-relationships-a-524gkdmy8w.pdf

Microfibril Angle: Measurement, Variation and Relationships – A Review

Plant cell walls form an organic complex composite material that fulfils various functions. The hierarchical structure of this material is generated from the integration of its elementary components. This review provides an overview of wood as a composite material followed by its deconstruction into fibres that can then be incorporated into biobased composites. Firstly, the fibres are defined, and their various origins are discussed. Then, the organisation of cell walls and their components are described. The emphasis is on the molecular interactions of the cellulose microfibrils, lignin and hemicelluloses in planta. Hemicelluloses of diverse species and cell walls are described. Details of their organisation in the primary cell wall are provided, as understanding of the role of hemicellulose has recently evolved and is likely to affect our perception and future study of their secondary cell wall homologs. The importance of the presence of water on wood mechanical properties is also discussed. These sections provide the basis for understanding the molecular arrangements and interactions of the components and how they influence changes in fibre properties once isolated. A range of pulping processes can be used to individualise wood fibres, but these can cause damage to the fibres. Therefore, issues relating to fibre production are discussed along with the dispersion of wood fibres during extrusion. The final section explores various ways to improve fibres obtained from wood.

/pdf/plant-fibre-molecular-structure-and-biomechanical-properties-4puetw3yeb.pdf

Plant Fibre: Molecular Structure and Biomechanical Properties, of a Complex Living Material, Influencing Its Deconstruction towards a Biobased Composite.

The secondary plant cell wall is a composite of cellulose and a water-swelling matrix containing hemicelluloses and lignin. Recent experiments showed that this swelling capacity helps generating growth stresses, e.g., in conifer branches or in the stem when subjected to side loads. A similar mechanism also provides motility to wheat seeds. Here we study a simple mechanical model for the cell wall which—in contrast to earlier models—considers extensible cellulose fibrils in an isotropically swelling matrix. Depending on the detailed architecture of the cellulose fibrils, the model predicts that swelling may lead either to significant compressive or tensile stresses or to large movements at low stresses. The model reproduces most of the experimental observations in the wood cells and in the awns of wheat dispersal units. It is also simple enough to provide general guidelines for designing the architecture of fibres in an isotropic swelling medium to generate movements and forces of various kinds and directions.

Cellulose fibrils direct plant organ movements

Paper is a widely used packaging material and is nowadays regaining importance, e.g., as bio-based and biodegradable material. Moreover, new technologies such as polymer–fiber composites, printed electronics and the deep drawing of paper are developing. The process stability and also the resulting quality of paper converting processes such as coating, metallization, printing, and the printing of electronics are highly affected by the hygroexpansion of paper. In order to reduce production instability and to choose and develop paper substrates with ideal characteristics, critical parameters need to be known. This paper offers an extensive overview of those parameters, starting at a molecular and microscopic level with the effect of the constituents and morphology of single fibers, before moving on to paper contents, chemical modifications and additives and finally concluding with paper production and fiber network modification. It was found that the major influences are single fiber sorption, inter-fiber contacts, microfibril angle, fiber morphology (length, width, curliness) and fiber orientation. This review gives new ideas and insights for technologists working in research, development and production optimization of paper-based products.

/pdf/factors-affecting-the-hygroexpansion-of-paper-4q5gbd8lio.pdf

Factors affecting the hygroexpansion of paper

To elucidate the origin of the shrinking anisotropy of wood during the drying process, as well as to begin to gain an understanding of the interaction between the moisture and the cell wall components, the shrinking process of a single wood fiber regarding water desorption was simulated by using an analytical model which was developed in the previous report (Part 1). Resulting data were compared with the experimental ones in this paper. The following conclusions were obtained: (1) The matrix substance, as a skeleton in the secondary wall, tends to shrink isotropically. However, the cellulose microfibrils, as a rigid framework of the cell wall, almost did not shrink at all due to the water desorption. As result, wood shrinks anisotropically during a drying process. The microfibril angle in the S2 layer is one of the most important factors related to the degree of shrinking anisotropy of the wood while drying. (2) According to the simulation, the expansive strain caused in the matrix skeleton by the water sorption increases by 15% (= 150,000 micro-strains) from the oven-dried condition to the green condition. Based on this value, the moisture content at the fiber saturation point is calculated to be about 35%, which is close to the experimentally obtained one. These results give quantitative evidences that the hygroexpansion of the wood cell wall is controlled by the mechanism of the reinforced matrix hypothesis.

M. Ninomiya

Papers

A model of anisotropic swelling and shrinking process of wood