M. P. de Jong

Bio: M. P. de Jong is an academic researcher from MESA+ Institute for Nanotechnology. The author has contributed to research in topics: X-ray photoelectron spectroscopy & Thin film. The author has an hindex of 23, co-authored 63 publications receiving 2944 citations. Previous affiliations of M. P. de Jong include Eindhoven University of Technology & University of Twente.

Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes

Abstract: A cause for degradation of polymer light-emitting diodes is the oxidation of the polymer by oxygen diffusing out of the indium-tin-oxide (ITO) anode. This problem can be solved by the introduction of an organic hole-injecting film, poly-(3,4-ethylenedioxythiophene) (PEDOT) doped with poly(styrenesulfonate) (PSS), between the ITO and the emissive polymer. Indeed, a dramatic improvement of the lifetime and also the luminous efficiency has been observed. However, our Rutherford backscattering (RBS) studies show that the ITO/PEDOT:PSS interface is not stable. In as prepared glass/ITO/PEDOT:PSS samples 0.02 at. % indium was found in the PEDOT:PSS film. Annealing in a nitrogen atmosphere at 100 °C during 2500 h increased the indium concentration to 0.2 at. %. Upon exposure to air much faster degradation of the ITO/PEDOT:PSS interface was observed; after several days in air the amount of indium reached a saturation concentration of 1.2 at. %. The degradation of the interface can be explained by etching of the IT...

Room-temperature spintronic effects in Alq3-based hybrid devices

Abstract: We report on efficient spin polarized injection and transport in long (102 nm) channels of Alq3 organic semiconductor. We employ vertical spin valve devices with a direct interface between the bottom manganite electrode and Alq3, while the top-electrode geometry consists of an insulating tunnel barrier placed between the “soft” organic semiconductor and the top Co electrode. This solution reduces the ubiquitous problem of the so-called ill-defined layer caused by metal penetration, which extends into the organic layer up to distances of about 50–100 nm and prevents the realization of devices with well-defined geometry. For our devices the thickness is defined with an accuracy of about 2.5 nm, which is near the Alq3 molecular size. We demonstrate efficient spin injection at both interfaces in devices with 100- and 200-nm-thick channels. We solve one of the most controversial problems of organic spintronics: the temperature limitations for spin transport in Alq3-based devices. We clarify this issue by achieving room-temperature spin valve operation through the improvement of spin injection properties of both ferromagnetic/Alq3 interfaces. In addition, we discuss the nature of the inverse sign of the spin valve effect in such devices proposing a mechanism for spin transport.

Electronic structure of hybrid interfaces for polymer-based electronics

Abstract: The fundamentals of the energy level alignment at anode and cathode electrodes in organic electronics are described. We focus on two different models that treat weakly interacting organic/metal (and organic/organic) interfaces: the induced density of interfacial states model and the so-called integer charge transfer model. The two models are compared and evaluated, mainly using photoelectron spectroscopy data of the energy level alignment of conjugated polymers and molecules at various organic/metal and organic/organic interfaces. We show that two different alignment regimes are generally observed: (i) vacuum level alignment, which corresponds to the lack of vacuum level offsets (Schottky-Mott limit) and hence the lack of charge transfer across the interface, and (ii) Fermi level pinning where the resulting work function of an organic/metal and organic/organic bilayer is independent of the substrate work function and an interface dipole is formed due to charge transfer across the interface. We argue that the experimental results are best described by the integer charge transfer model which predicts the vacuum level alignment when the substrate work function is above the positive charge transfer level and below the negative charge transfer level of the conjugated material. The model further predicts Fermi level pinning to the positive (negative) charge transfer level when the substrate work function is below (above) the positive (negative) charge transfer level. The nature of the integer charge transfer levels depend on the materials system: for conjugated large molecules and polymers, the integer charge transfer states are polarons or bipolarons; for small molecules' highest occupied and lowest unoccupied molecular orbitals and for crystalline systems, the relevant levels are the valence and conduction band edges. Finally, limits and further improvements to the integer charge transfer model are discussed as well as the impact on device design.

Energetics at Au top and bottom contacts on conjugated polymers

Abstract: Photoelectron spectroscopy was employed to examine the energetics, and therefore charge injection barriers, at top and bottom contact configurations of gold and conjugated polymers, i.e., polymer spin coated on gold and vapor-deposited gold on polymer interfaces. Very similar results are obtained for both ex situ (contaminated) and in situ (clean) prepared interfaces: a 0.7–0.8eV decrease in the vacuum energy levels is consistently observed as compared to bare polycrystalline gold. These observations are explained by changes of the metal work function upon contacting either polymers or contaminants, associated with the reduction of the electron density tail that extends outside the metal surface.

Energy level alignment and chemical interaction at Alq 3 /Co interfaces for organic spintronic devices

Abstract: The electronic structure of the interface between tris(8-hydroxyquinoline) aluminum $({\text{Alq}}_{3})$ and cobalt was investigated by means of photoelectron spectroscopy. As demonstrated recently, this interface is characterized by efficient spin injection in organic spintronic devices. A strong interface dipole that reduces the effective work function of cobalt by about 1.5 eV was observed. This leads to a large barrier for hole injection into the highest occupied molecular-orbital (HOMO) level of 2.1 eV, in agreement with a previously proposed model based on electron transport in ${\text{Co-Alq}}_{3}{\text{-La}}_{0.7}{\text{Sr}}_{0.3}{\text{MnO}}_{3}$ spin valves. Further experimental results indicate that chemical interaction occurs between the ${\text{Alq}}_{3}$ molecules and the cobalt atoms, while the latter penetrate the ${\text{Alq}}_{3}$ layer upon vapor deposition of Co atoms. The data presented lead to significant progress in understanding the electronic structure of the Co-on-${\text{Alq}}_{3}$ interface and represent a significant step toward the definition of the interface parameters for the efficient spin injection in ${\text{Alq}}_{3}$ based spin valves.

Conjugated polymer-based organic solar cells

Abstract: The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.

Polymer‐Fullerene Bulk‐Heterojunction Solar Cells

Abstract: Solution-processed bulk-heterojunction solar cells have gained serious attention during the last few years and are becoming established as one of the future photovoltaic technologies for low-cost power production. This article reviews the highlights of the last few years, and summarizes today's state-of-the-art performance. An outlook is given on relevant future materials and technologies that have the potential to guide this young photovoltaic technology towards the magic 10% regime. A cost model supplements the technical discussions, with practical aspects any photovoltaic technology needs to fulfil, and answers to the question as to whether low module costs can compensate lower lifetimes and performances.

Synthesis of Light-Emitting Conjugated Polymers for Applications in Electroluminescent Devices

Abstract: A review was presented to demonstrate a historical description of the synthesis of light-emitting conjugated polymers for applications in electroluminescent devices. Electroluminescence (EL) was first reported in poly(para-phenylene vinylene) (PPV) in 1990 and researchers continued to make significant efforts to develop conjugated materials as the active units in light-emitting devices (LED) to be used in display applications. Conjugated oligomers were used as luminescent materials and as models for conjugated polymers in the review. Oligomers were used to demonstrate a structure and property relationship to determine a key polymer property or to demonstrate a technique that was to be applied to polymers. The review focused on demonstrating the way polymer structures were made and the way their properties were controlled by intelligent and rational and synthetic design.

Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers

Abstract: Lead halide perovskite solar cells have recently attracted tremendous attention because of their excellent photovoltaic efficiencies. However, the poor stability of both the perovskite material and the charge transport layers has so far prevented the fabrication of devices that can withstand sustained operation under normal conditions. Here, we report a solution-processed lead halide perovskite solar cell that has p-type NiOx and n-type ZnO nanoparticles as hole and electron transport layers, respectively, and shows improved stability against water and oxygen degradation when compared with devices with organic charge transport layers. Our cells have a p–i–n structure (glass/indium tin oxide/NiOx/perovskite/ZnO/Al), in which the ZnO layer isolates the perovskite and Al layers, thus preventing degradation. After 60 days storage in air at room temperature, our all-metal-oxide devices retain about 90% of their original efficiency, unlike control devices made with organic transport layers, which undergo a complete degradation after just 5 days. The initial power conversion efficiency of our devices is 14.6 ± 1.5%, with an uncertified maximum value of 16.1%. Using metal oxides for both the hole- and electron-transport layers in perovskite solar cells significantly improves their stability compared with devices containing organic transport layers.