M. Yu. Murashkin

Bio: M. Yu. Murashkin is an academic researcher from Ufa State Aviation Technical University. The author has contributed to research in topics: Severe plastic deformation & Alloy. The author has an hindex of 18, co-authored 46 publications receiving 1642 citations. Previous affiliations of M. Yu. Murashkin include Saint Petersburg State University.

Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in development

Abstract: In recent years, much progress has been made in the studies of nanostructured Al alloys for advanced structural and functional use associated both with the development of novel routes for the fabrication of bulk nanostructured materials using severe plastic deformation (SPD) techniques and with investigation of fundamental mechanisms leading to improved properties. This review paper discusses new concepts and principles in application of SPD processing to fabricate bulk nanostructured Al alloys with advanced properties. Special emphasis is placed on the relationship between microstructural features, mechanical, chemical, and physical properties, as well as the innovation potential of the SPD-produced nanostructured Al alloys.

Nanostructured Al and Cu alloys with superior strength and electrical conductivity

Abstract: Mechanical strength and electrical conductivity are the most important properties of conducting metallic materials used in electrical engineering. Today, there is a growing need in this field for innovative conductor materials with improved properties. Meanwhile, the main issue is that high electrical conductivity and high strength are usually mutually exclusive due to physical nature of these properties. Alloying of pure metals results in significant increase of their mechanical strength, whereas electrical conductivity dramatically drops due to the scattering of electrons at solutes and precipitates. Recent studies have shown that intelligent nanostructural design in Al, Cu, and their alloys can improve combination of high mechanical strength with enhanced electrical conductivity. It was demonstrated that mechanical strength and electrical conductivity of these materials are primarily controlled by their microstructure, of which grain size, morphology of second phases, and their distribution, as well as dislocation structure, are the most important parameters. Rapid development of the state-of-the-art methods for the microstructural characterization at nano- and atomic scale has allowed a deeper insight into microstructure–properties relationship. The approach of intelligent nanostructural design of Al and Cu alloys has even enabled to increase the material strength with simultaneous improvement of its electrical conductivity. In this case, recent works on nanostructuring alloys by severe plastic deformation are of special interest, which gives rise to fundamental questions dealing with new mechanisms of strength and electrical conductivity as well as innovation potential of practical application of nanostructured materials. These issues are considered and discussed in the present progress article.

Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility

Abstract: The high-temperature stability and mechanical properties of refractory molybdenum alloys are highly desirable for a wide range of critical applications. However, a long-standing problem for these alloys is that they suffer from low ductility and limited formability. Here we report a nanostructuring strategy that achieves Mo alloys with yield strength over 800 MPa and tensile elongation as large as ~ 40% at room temperature. The processing route involves a molecular-level liquid-liquid mixing/doping technique that leads to an optimal microstructure of submicrometre grains with nanometric oxide particles uniformly distributed in the grain interior. Our approach can be readily adapted to large-scale industrial production of ductile Mo alloys that can be extensively processed and shaped at low temperatures. The architecture engineered into such multicomponent alloys offers a general pathway for manufacturing dispersion-strengthened materials with both high strength and ductility.