scispace - formally typeset
Search or ask a question
Author

Mahesh P. Abegaonkar

Bio: Mahesh P. Abegaonkar is an academic researcher from Indian Institute of Technology Delhi. The author has contributed to research in topics: Antenna (radio) & Patch antenna. The author has an hindex of 20, co-authored 151 publications receiving 1362 citations. Previous affiliations of Mahesh P. Abegaonkar include Indian Institutes of Technology & Kyungpook National University.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, a high-gain, aperture-efficient cavity resonator antenna using metamaterial superstrate is reported, which shows calculated gain of 16.35 dB achieving 92.42% of maximum gain due to effective aperture area in H-plane.
Abstract: In this letter, a high-gain, aperture-efficient cavity resonator antenna using metamaterial superstrate is reported. Highly reflective compact metamaterial surface resonating at 10.15 GHz with measured 3-dB bandwidth stopband characteristic of 4.10 GHz from 8.1 to 12.2 GHz is proposed. Material property of the metasurface is studied by using the free-space technique. Next, the metasurface is used as a superstrate to a patch antenna operating at 10.09 GHz, forming Fabry-Perot cavity. Gain enhancement of 11.85 dB in H-plane and 12.5 dB in E-plane with improved cross-polarization level and front-to-back ratio is observed. The prototype cavity antenna shows calculated gain of 16.35 dB achieving 92.42% of maximum gain due to effective aperture area in H-plane.

109 citations

Journal ArticleDOI
TL;DR: In this paper, a highly isolated compact four-element planar ultrawideband (UWB) multiple-input-multiple-output (MIMO) antenna array configuration is presented.
Abstract: This letter presents a highly isolated compact four-element planar ultrawideband (UWB) multiple-input-multiple-output (MIMO) antenna array configuration. The main advantages of the proposed array configuration are that it requires no isolation/decoupling circuit and the configuration is easily extendable to larger size array. The array consists of novel miniaturized slotted annular ring monopole antenna and each element in the array is placed orthogonal to its adjacent elements. The fabricated structure provides good impedance bandwidth matching and high isolation between elements over the range from 3 to 15 GHz. The absence of decoupling circuit results in overall compact size of the proposed design. The prototypes are fabricated and tested. The simulated and measured results are in good agreement. Moreover, the envelope correlation coefficient and channel capacity loss of the array are calculated, which shows good MIMO performance. The proposed monopole antenna structure supports multielement UWB MIMO antenna array design with easy extension of elements and without any decoupling circuit. An example of eight-element array is also investigated.

100 citations

Journal ArticleDOI
TL;DR: In this article, the frequency selective surface (FSS) properties of a uniplanar electromagnetic band-gap unit cell are studied and a 13 × 13 array of these unit cells is used as a superstrate at a distance ≈ 0.5λ from the center frequency of the FSS passband.
Abstract: In this letter, frequency selective surface (FSS) properties of a uniplanar electromagnetic band-gap (EBG) unit cell are studied. The unit cell consists of meander-line inductor and interdigital capacitors on one side of a substrate. Simulation results indicate that the unit cell exhibits passband characteristics centered at 10.04 GHz. FSS property of the structure is verified by measurement using X-band waveguides. The measured results show passband characteristics at 9.45 GHz. A 13 × 13 array of these unit cells (FSS screen) is used as a superstrate at a distance ≈ 0.5λ 0 over a patch antenna operating at 10.8 GHz, offset from center frequency of the FSS passband. Directivity improvement of 6.95 dB is observed along 0° in the measurements of patch antenna with FSS superstrate as compared to the patch antenna without superstrate.

90 citations

Journal ArticleDOI
TL;DR: In this paper, a four-port multi-input-multi-output (MIMO) antenna for 5G applications is proposed, which is compact with a size of 11 mm × 31 mm excluding feed lines.
Abstract: In this letter a four-port multi-input-multi-output (MIMO) antenna for 5G applications is proposed. This antenna is compact with a size of 11 mm × 31 mm excluding feed lines. The radiation patterns of the antenna show pattern diversity in the azimuthal plane, and each antenna element has an end-fire gain about 10 dBi by employing an array of metamaterial unit cells. The isolation between the antenna elements with edge to edge separation < λ0/5.5 at 28 GHz is enhanced by trimming the corners of the rectangular high refractive index metamaterial region along with a ground stub between antennas. The proposed antenna is fabricated, and each antenna element has return loss, Snn < −10 dB with isolation, Snm > 21 dB in the frequency range 26 GHz to 31 GHz, which makes this antenna potential candidate for MIMO application at 28 GHz band enabling 5G cellular communications.

81 citations

Journal ArticleDOI
TL;DR: In this paper, a polarization-insensitive dual-band artificial magnetic conductor (AMC) structure is designed and experimentally verified, which consists of a planar array of annular ring-slot loaded rectangular patches.
Abstract: A polarization-insensitive dual-band artificial magnetic conductor (AMC) structure is designed and experimentally verified. It consists of a planar array of annular ring-slot loaded rectangular patches. Details of the proposed structure and origin of the two bands is discussed. Through simulations and measurements, it is shown that the structure is insensitive to polarization of the incident wave. The tuning of the higher AMC band is demonstrated by varying the capacitance of the annular slot through its width variation. The designed AMC is used as a reflector for a wideband monopole patch antenna. It is shown experimentally at the antenna frequencies in the AMC band that the gain of the antenna improves by almost 10 dB and front-to-back ratio is improved by 15 dB.

76 citations


Cited by
More filters
ReportDOI
08 Dec 1998
TL;DR: In this article, the authors consider the unique features of UWB technology and propose that the FCC should consider them in considering changes to Part 15 and take into account their unique features for radar and communications uses.
Abstract: In general, Micropower Impulse Radar (MIR) depends on Ultra-Wideband (UWB) transmission systems. UWB technology can supply innovative new systems and products that have an obvious value for radar and communications uses. Important applications include bridge-deck inspection systems, ground penetrating radar, mine detection, and precise distance resolution for such things as liquid level measurement. Most of these UWB inspection and measurement methods have some unique qualities, which need to be pursued. Therefore, in considering changes to Part 15 the FCC needs to take into account the unique features of UWB technology. MIR is applicable to two general types of UWB systems: radar systems and communications systems. Currently LLNL and its licensees are focusing on radar or radar type systems. LLNL is evaluating MIR for specialized communication systems. MIR is a relatively low power technology. Therefore, MIR systems seem to have a low potential for causing harmful interference to other users of the spectrum since the transmitted signal is spread over a wide bandwidth, which results in a relatively low spectral power density.

644 citations

01 Dec 1992

298 citations

Journal ArticleDOI
TL;DR: In this paper, the authors shed light on some of the major enabling technologies for 6G, which are expected to revolutionize the fundamental architectures of cellular networks and provide multiple homogeneous artificial intelligence-empowered services, including distributed communications, control, computing, sensing and energy, from its core to its end nodes.
Abstract: The fifth generation (5G) mobile networks are envisaged to enable a plethora of breakthrough advancements in wireless technologies, providing support of a diverse set of services over a single platform. While the deployment of 5G systems is scaling up globally, it is time to look ahead for beyond 5G systems. This is mainly driven by the emerging societal trends, calling for fully automated systems and intelligent services supported by extended reality and haptics communications. To accommodate the stringent requirements of their prospective applications, which are data-driven and defined by extremely low-latency, ultra-reliable, fast and seamless wireless connectivity, research initiatives are currently focusing on a progressive roadmap towards the sixth generation (6G) networks, which are expected to bring transformative changes to this premise. In this article, we shed light on some of the major enabling technologies for 6G, which are expected to revolutionize the fundamental architectures of cellular networks and provide multiple homogeneous artificial intelligence-empowered services, including distributed communications, control, computing, sensing, and energy, from its core to its end nodes. In particular, the present paper aims to answer several 6G framework related questions: What are the driving forces for the development of 6G? How will the enabling technologies of 6G differ from those in 5G? What kind of applications and interactions will they support which would not be supported by 5G? We address these questions by presenting a comprehensive study of the 6G vision and outlining seven of its disruptive technologies, i.e., mmWave communications, terahertz communications, optical wireless communications, programmable metasurfaces, drone-based communications, backscatter communications and tactile internet, as well as their potential applications. Then, by leveraging the state-of-the-art literature surveyed for each technology, we discuss the associated requirements, key challenges, and open research problems. These discussions are thereafter used to open up the horizon for future research directions.

198 citations

Journal ArticleDOI
TL;DR: It is demonstrated that low-intensity RFR is an expressive oxidative agent for living cells with a high pathogenic potential and that the oxidative stress induced by RFR exposure should be recognized as one of the primary mechanisms of the biological activity of this kind of radiation.
Abstract: This review aims to cover experimental data on oxidative effects of low-intensity radiofrequency radiation (RFR) in living cells. Analysis of the currently available peer-reviewed scientific litera...

176 citations