Man-Hong Lai

Bio: Man-Hong Lai is an academic researcher from University of Malaya. The author has contributed to research in topics: Fiber Bragg grating & Grating. The author has an hindex of 8, co-authored 22 publications receiving 384 citations.

Chronology of Fabry-Perot interferometer fiber-optic sensors and their applications: a review.

Abstract: Optical fibers have been involved in the area of sensing applications for more than four decades. Moreover, interferometric optical fiber sensors have attracted broad interest for their prospective applications in sensing temperature, refractive index, strain measurement, pressure, acoustic wave, vibration, magnetic field, and voltage. During this time, numerous types of interferometers have been developed such as Fabry-Perot, Michelson, Mach-Zehnder, Sagnac Fiber, and Common-path interferometers. Fabry-Perot interferometer (FPI) fiber-optic sensors have been extensively investigated for their exceedingly effective, simple fabrication as well as low cost aspects. In this study, a wide variety of FPI sensors are reviewed in terms of fabrication methods, principle of operation and their sensing applications. The chronology of the development of FPI sensors and their implementation in various applications are discussed.

In-Fiber Gratings for Simultaneous Monitoring Temperature and Strain in Ultrahigh Temperature

Abstract: In this letter, a pair of regenerated gratings with Bragg wavelengths of 1547 and 1304 nm in a single piece of single-mode fiber has been fabricated for simultaneous monitoring of temperature and strain in ultrahigh temperature environment. A $3\times 3$ matrix is used to characterize the cross sensitivity of the proposed sensor in which the strain sensitivity varies with temperature change. The proposed structure exhibits the deviation of 28.3 $\mu \varepsilon $ and 4.1 °C at the ranges of 0–1000 $\mu \varepsilon $ and 25 °C–900 °C, respectively.

Thermal stress modification in regenerated fiber Bragg grating via manipulation of glass transition temperature based on CO₂-laser annealing.

Abstract: In this work, we have demonstrated thermal stress relaxation in regenerated fiber Bragg gratings (RFBGs) by using direct CO₂-laser annealing technique. After the isothermal annealing and slow cooling process, the Bragg wavelength of the RFBG has been red-shifted. This modification is reversible by re-annealing and rapid cooling. It is repeatable with different cooling process in the subsequent annealing treatments. This phenomenon can be attributed to the thermal stress modification in the fiber core by means of manipulation of glass transition temperature with different cooling rates. This finding in this investigation is important for accurate temperature measurement of RFBG in dynamic environment.

Spectral analysis of bent fiber Bragg gratings: theory and experiment

Abstract: This Letter presents a simple mathematical model developed from coupled-mode theory to describe the relationship between Bragg transmission loss (BTL), grating length, coupling coefficients, and bending loss in a bent fiber Bragg grating. In our investigation, the finding indicates that the decrement of BTL can be attributed to the increasing bending loss and degradation of both dc and ac coupling coefficients as the bending radius decreases. Besides, the center wavelength shifts as a result of coupling coefficients degradation. The validity of the proposed model is supported by experimental result.

Observation of grating regeneration by direct CO 2 laser annealing

Abstract: In this work, we have demonstrated for the first time grating regeneration in hydrogenated fibers by direct CO2 laser annealing. During the annealing process, the center wavelength redshifts as the intensity of the focused CO2 laser on the grating is elevated. The reflectivity of the grating begins to decay as the temperature induced in the grating approaches the erasure temperature. The grating is completely erased and regenerated afterwards. The observed spectral results have provided the proof of occurrence of dehydroxylation and stress relaxation in the fiber core during the annealing process. Regenerated gratings with low loss, good temperature sensitivities and sustainability have been successfully developed by this technique.

Optical Refractive Index Sensors with Plasmonic and Photonic Structures: Promising and Inconvenient Truth

Abstract: DOI: 10.1002/adom.201801433 Scientific American selects plasmonic sensing as the top 10 emerging technologies of 2018.[15] Almost every single new plasmonic or photonic structure would be explored to test its sensing ability.[16–29] These works tend to report the sensing performance of their own structure. Some declare that their sensitivity breaks the world record. However, there is still a missing literature on what the world record really is, the gap between the experiments and the theoretical limit, as well as the differences between metal-based plasmonic sensors and dielectric-based photonic sensors. To push plasmonic and photonic sensors into industrial applications, an optical sensing technology map is absolutely necessary. This review aims to cover a wide range of most representative plasmonic and photonic sensors, and place them into a single map. The sensor performances of different structures will be distinctly illustrated. Future researchers could plot the sensing ability of their new sensors into this technology map and gauge their performances in this field. In this review, we focus on optical refractive index (RI) sensors with no fluorescent labeling required. We will utilize two parameters to characterize and compare the performance of optical RI sensors: sensitivity to RI change (denoted by symbol SRI) and figure of merit (in short, FoM). For simplicity, we restrict our discussions to bulk RI change, where the change in RI occurs within the whole sample. There is another case where the RI variation occurs only within a very small volume close to the sensor surface. This surface RI sensitivity is proportional to the bulk RI sensitivity, the ratio of the thickness of the layer within which the surface RI variation occurs, and the penetration depth of the optical mode.[6] The bulk RI sensitivity defines the ratio of the change in sensor output (e.g., resonance angle, intensity, or resonant wavelength) to the bulk RI variations. Here, we limit our discussions to the spectral interrogations and the bulk RI sensitivity SRI is given by[3,5–7,30]

A review on optical fiber sensors for environmental monitoring

Abstract: Environmental monitoring has become essential in order to deal with environmental resources efficiently and safely in the realm of green technology. Environmental monitoring sensors are required for detection of environmental changes in industrial facilities under harsh conditions, (e.g. underground or subsea pipelines) in both the temporal and spatial domains. The utilization of optical fiber sensors is a promising scheme for environmental monitoring of this kind, owing to advantages including resistance to electromagnetic interference, durability under extreme temperatures and pressures, high transmission rate, light weight, small size, and flexibility. In this paper, the optical fiber sensors employed in environmental monitoring are summarized for understanding of their sensing principles and fabrication processes. Numerous specific applications in petroleum engineering, civil engineering, and agricultural engineering are explored, followed by discussion on the potentials of OFS in manufacturing.

Fiber-Optic Chemical Sensors and Biosensors (2015-2019).

Abstract: High-quality optical fibers can be produced now at a low cost and large quantity, and this has further promoted the development of fiber optic (chemical) sensors. After over 30 years of innovation, fiber optic sensing technology has become mature because of acceptable costs, compact instrumentation, high accuracy and the capability of performing measurements at inaccessible sites, over large distances, in strong (electro)magnetic fields and in harsh environment. The technology is still proceeding quickly in terms of innovation, and respective applications have been found in highly diversified fields. This review covers work published in the time period between October 2015 and October 2019. It is written in continuation of previous reviews.

Optical Fibre Pressure Sensors in Medical Applications

Abstract: This article is focused on reviewing the current state-of-the-art of optical fibre pressure sensors for medical applications. Optical fibres have inherent advantages due to their small size, immunity to electromagnetic interferences and their suitability for remote monitoring and multiplexing. The small dimensions of optical fibre-based pressure sensors, together with being lightweight and flexible, mean that they are minimally invasive for many medical applications and, thus, particularly suited to in vivo measurement. This means that the sensor can be placed directly inside a patient, e.g., for urodynamic and cardiovascular assessment. This paper presents an overview of the recent developments in optical fibre-based pressure measurements with particular reference to these application areas.

Fiber Bragg Grating Sensors for the Oil Industry.

Abstract: With the oil and gas industry growing rapidly, increasing the yield and profit require advances in technology for cost-effective production in key areas of reservoir exploration and in oil-well production-management. In this paper we review our group’s research into fiber Bragg gratings (FBGs) and their applications in the oil industry, especially in the well-logging field. FBG sensors used for seismic exploration in the oil and gas industry need to be capable of measuring multiple physical parameters such as temperature, pressure, and acoustic waves in a hostile environment. This application requires that the FBG sensors display high sensitivity over the broad vibration frequency range of 5 Hz to 2.5 kHz, which contains the important geological information. We report the incorporation of mechanical transducers in the FBG sensors to enable enhance the sensors’ amplitude and frequency response. Whenever the FBG sensors are working within a well, they must withstand high temperatures and high pressures, up to 175 °C and 40 Mpa or more. We use femtosecond laser side-illumination to ensure that the FBGs themselves have the high temperature resistance up to 1100 °C. Using FBG sensors combined with suitable metal transducers, we have experimentally realized high- temperature and pressure measurements up to 400 °C and 100 Mpa. We introduce a novel technology of ultrasonic imaging of seismic physical models using FBG sensors, which is superior to conventional seismic exploration methods. Compared with piezoelectric transducers, FBG ultrasonic sensors demonstrate superior sensitivity, more compact structure, improved spatial resolution, high stability and immunity to electromagnetic interference (EMI). In the last section, we present a case study of a well-logging field to demonstrate the utility of FBG sensors in the oil and gas industry.